IB Motion detecter sensor transformer HZK218C 77309055IR sensor: 13mm ELD 250W Infrared Sensor Switch Manufacturer SELF MPN HZK218C Primary 220 - 240v 50/60Hz Secondary 240v Dimmable No Minimum Wattage N/A Maximum Wattage 250w Outputs 1

Read more less

15W LED Retrofit Geartray Top Hat Style 2000 Lumens 3K colour Temp Microwave and Corridor Function 5 year Warranty  215mm x 195mm x 40mm (fixing centres - 200mm)  

Read more less

Changeover Module On medium to large projects it can be advantageous to provide emergency lighting using a static inverter connected to a number of the existing mains luminaires. In these installations it is necessary for the normal supply and the static inverter supply to be selected by an automatic switching device within or external to the luminaire. Some suppliers offer a standard 230V AC change-over relay for this purpose but this ignores the fact that a free running static inverter is not tied to the grid frequency and will therefore be out of phase or in a worst case situation could be in anti-phase with the normal switched supply. When a relay tries to switch between these supplies there is a tendency for the relay to suffer from arcing between the normally open and the normally closed contacts resulting in a temporary short circuit between the two out of phase supplies. This will cause external circuit protection to operate (fuses and/or circuit breakers) and will ultimately destroy the relay. In extreme cases it can also damage the static inverter. The SIM240 static inverter module is designed to eliminate these switching problems. The SIM240 utilises two interposing relays for the two supplies and introduces a time delay of approximately 500m sec between breaking the normal supply and connecting the static inverter supply. This sequence is reversed upon restoration of the monitored 230 volt supply when the SIM240 immediately breaks the static inverter supply and then after a similar time delay reconnects the normal lighting supply. A dimming isolation facility is incorporated as standard for use with dimming ballasts to enable full light output to be achieved in the emergency condition. Datasheet

Read more less

  14.4V 1.6Ah 3+3 With Amp Connector  ChemistryNiCD (Nickel-cadmium) ConfigurationTwin Stick ConfigurationCell SizeSub C Cell (Cs)Width56Length286Depth28Weight545AMPH1.6Voltage14.4   Existalite (2+6) Cell 1.6Ah 14.4v Twin Emergency Battery Pack (Existalite)

Read more less

6v 4Ah D Size Stick , Ni-CD with Amp connector  Cross Reference B005 

Read more less

3.6V 1800MAH NI-CD REPLACEMENT BATTERY b992

Read more less

6V 4Ah Tagged Ni-CD 

Read more less

  Chemistry NIMHMSDS datasheet HS code 8507500090 Voltage 3.6V Capacity 2000mAh Size (h w d) 151 x 15 x 15 mm Weight 86g ESP cell-ref ESP2000AAHFT Cross referenced with othermanufacturers part numbers: MACKWELL B941 MACKWELL B957

Read more less

4 VTD 70787296

Read more less

The Single Core Blue Lighting Cable, measuring 0.8mm in diameter and extending 100 meters, is designed for reliable electrical installations requiring precise and consistent conductivity. Its single core construction ensures efficient current flow, making it ideal for lighting circuits where performance and safety are paramount. The blue insulation provides clear identification for neutral wiring, aiding in organized and compliant electrical setups. Suitable for both commercial and residential applications, this cable offers durability and flexibility, supporting long runs without significant voltage drop. Trust this cable to deliver professional-grade results in your lighting projects.

Read more less

The Single Core Brown Lighting Cable, with a diameter of 0.8mm and a length of 100 meters, is engineered for precise and safe electrical wiring in lighting applications. Its single-core design ensures optimal current flow, making it suitable for use as a live conductor in lighting circuits. The brown insulation provides clear phase identification, complying with wiring regulations and enhancing installation accuracy. Manufactured to meet stringent quality standards, this cable offers excellent durability and resistance to environmental factors, ensuring long-lasting performance in both domestic and commercial lighting systems. Ideal for professional electricians seeking reliable and efficient wiring solutions.

Read more less

The Single Core White Lighting Cable, measuring 0.8mm in diameter and supplied in a 100-meter length, is designed for reliable electrical installations requiring consistent conductivity and durability. Its single-core construction ensures efficient current flow, making it ideal for lighting circuits where precision and safety are paramount. The white insulation provides clear identification and protection against environmental factors, enhancing longevity and performance in both residential and commercial settings. This cable meets industry standards, offering professionals a dependable solution for wiring lighting systems with ease and confidence.

Read more less