Product description
High-temperature NiCd battery pack for use with emergency lighting units
4 year design life
1 year guarantee from delivery date
Properties
Constant high-temperature operation
Temperature depending on the used emergency lighting unit (refer to respective emergency control gear data sheet)
Good charging properties at high temperature
High energy maintenance of the charged battery
Certified quality manufacturer
Casing material made of polycarbonate
1.0 m integrated double-insulated cable
1.0 mm² solid wire, pre-stripped
Suitable for emergency lighting equipment as per IEC 60598-2-22
This item is Obsolete the nearest alternative is the below
Alternative
Tridonic 89800393 EM PowLED HP Basic FX 80W LED Driver
Tridonic 89800393 EM powLED HP BASIC FX 104 LP 80W 200V Linear LED Driver - High power emergency unit for linear LED lighting systems.Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION.Emergency lighting function for use with single batteries for manual testing.Please see attached spec sheet for more information.
Colours:
As Per Picture
Volts:
200-250 v
Watts:
80 w
Length:
360 mm
Bulb/Lamp Type:
LED Driver
Size:
360 x 30 x 21
Height:
21 mm
Width:
30 mm
Weight:
275g
This item is Obsolete the nearest alternative is the below
Alternative
Tridonic 89800393 EM PowLED HP Basic FX 80W LED Driver
Tridonic 89800393 EM powLED HP BASIC FX 104 LP 80W 200V Linear LED Driver - High power emergency unit for linear LED lighting systems.Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION.Emergency lighting function for use with single batteries for manual testing.Please see attached spec sheet for more information.
Colours:
As Per Picture
Volts:
200-250 v
Watts:
80 w
Length:
360 mm
Bulb/Lamp Type:
LED Driver
Size:
360 x 30 x 21
Height:
21 mm
Width:
30 mm
Weight:
275g
Accu - NiMH 4Ah 3A CON
Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet)
Low profile cross-section 21 mm
Good charging properties at high temperature
High energy maintenance of the charged battery
Certified quality manufacturer
In various configurations
Simple connection with plug-in system
Environmental friendly technology
High energy density
Low profile cross-section with removable end caps
Constant high-temperature operation
Good charging properties at high temperature
Electronic thermal battery management
High energy maintenance of the charged battery
Long shelf life
Integrated electronics
Safety features incorporated
Certified quality manufacturer
In various configurations
Simple connection with plug-in system
With polycarbonate fixing caps
Suitable for emergency lighting equipment as per IEC 60598-2-22
Product description
Fixed output built-in LED Driver
Constant current LED Driver
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current 250, 300 or 350 mA
Max. output power 65 W
Up to 90 % efficiency
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: metal, white
Type of protection IP20
Functions
Overload protection
Short-circuit protection
No-load protection
Burst protection voltage 0.5 kV
Surge protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Driver LCA 100W 24V one4all SC PRE
premium series
System solution
Product description
Dimmable 24 V constant voltage LED Driver for flexible constant voltage strips
Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
One4all interface and ready2mains enable different dimming options
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal life-time up to 50,000 h
5-year guarantee
Typical applications
Cove lighting, facade accent lighting, ceiling integration
Technical details
24 V, 100 W
Small design (295 x 43 x 30 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
Output terminals (+/–) equipped twice for more flexibility in the application
Interfaces
one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals
