Fixed output LED driver
Can be either used built-in or independent with clip-on strain-relief (see accessory)
Independent LED driver with cable clamps
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Constant current LED driver
Output current 600 mA
Max. output power 25.2 W
Nominal lifetime up to 50,000 h
The Tridonic LC 25W 500mA LED Driver is a fixed output, constant current LED driver with a maximum output power of 25w. These drivers have an average life of 100,000 hours and a 5 year guarantee. . Tridonic article number: 28000679
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Adjustable output current between 300 – 700 mA via NFC or DALI
Max. output power 28 W
Up to 86 % efficiency
Lowest power input on stand-by < 0.35 W
Nominal lifetime up to 100,000 h
Fixed output LED driver
Can be either used built-in or independent with clip-on strain-relief (see accessory)
Independent LED driver with cable clamps
Constant current LED driver
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current 350 mA
Max. output power 30 W
BIS approval mark for art. no.: 87500737, 87500739.
Nominal lifetime up to 50,000 h
Tridonic LC 75/1100-1400/54 flexC lp SNC4 28004144
Constant current LED driver for luminaire installation
3 pin DIP switch version valid from production date: 20.12.2024
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Selectable fixed output current 1,100, 1,150, 1,200, 1,250, 1,300, 1,350 and 1,400 mA (pre-selected current 1,400 mA)
Max. output power 75.6 W
Up to 89 % efficiency
Nominal lifetime up to 100,000 h
The Tridonic LC 75W 1800mA LED Driver is a fixed output, constant current LED driver with a maximum output power of 75w. These drivers have an average life of 100,000 hours and a 5 year guarantee. . Tridonic article number: 28000684
New article (28005037) with updated NFC interface for compatibility with ID ECCO Smart 2D-TR
Constant current LED driver for luminaire installation
For class I luminaires
Adjustable output current between 200 and 800 mA via NFC
Max. output power 90 W
Up to 95 % efficiency
Nominal lifetime up to 100,000 h
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Dimmable built-in constant current LED driver
Dimming range 1 to 100 %
For luminaires of protection class I and protection class II
Adjustable output current between 1,100 and 2,100 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
Max. output power 100 W
Up to 92 % efficiency
Power input on stand-by < 0.2 W
Nominal lifetime up to 100,000 h
Tridonic LCA 100W 250-700mA one4all lp PRE 28000661
Dimmable built-in constant current LED driver
Dimming range 1 to 100 %
For luminaires of protection class I and protection class II
Output current adjustable between 250 – 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
Max. output power 100 W
Up to 93 % efficiency
Power input on stand-by < 0.15 W
Nominal lifetime up to 100,000 h
Dimmable constant current LED driver (SELV)
Independent LED driver with cable clamps
Dimmable via leading edge and trailing edge phase dimmers
Dimming range 5 to 100 % (depending on dimmer)
For luminaires of protection class I and protection class II
For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
Temperature protection as per EN 61347-2-13 C5e
Selectable output current between 180, 250 and 350 mA
Max. output power 15 W
Up to 81 % efficiency
Nominal lifetime up to 50,000 h
The Tridonic LCA 35w 150–700mA one4all lp PRE is a 35w Tridonic dimmable constant current LED driver with an adjustable output current of 150-700mA. This driver has a max output power of 35w and an average life of 100,000 hours.
Tridonic LCA 35W 24V one4all SC PRE 28001662
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can be either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging
One4all interface and ready2mains enable different dimming options
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal lifetime up to 50,000 h
5 years guarantee
