11-15w LED AR111 Dimmable Transformer - Megaman - LD0216-K12 Product Code 140627 International Model Number LD0216-K12 Description LED Converter  

Read more less

14w T5 563mm Coolwhite/84 Fluorescent Tube

Read more less

14w T5 High Efficiency Warmwhite/835 563mm Fluorescent Tube - 3500 Kelvin

Read more less

FEATURES Rated Voltage 110...127 V 220...240 V Constant Current Current 250 mA 220-240 V = Output power 10 W 110-127 V =  10 W Current 350 mA 220-240 V = Output power 15 W 110-127 V =  15 W Current 400 mA 220-240 V = Output power 17 W 110-127 V =  15 W Current 450 mA 220-240 V = Output power 19 W 110-127 V =  15 W Current 500 mA 220-240 V = Output power 20 W 110-127 V =  15 W Current 550 mA 220-240 V = Output power 20 W 110-127 V =  15 W Current 600 mA 220-240 V = Output power 20 W 110-127 V =  15 W Current 700 mA 220-240 V = Output power 20 W 110-127 V =  15 W Constant Voltage (LED STRIP) Dimming: DALI-1 Additional technical features: RIPPLE FREE ACTIVE PFC (pf>0.9) SELV <> DIMMING: PWM WIDE RANGE INPUT VOLTAGE EXTERNAL NTC INPUT Approvals: KEMAKEUR, ENEC, UL (class 2), CCC, RCM, CE, EAC, IRAM, UKCA Plastic case: IP 20 (Independent Use) Minimum cut-out hole diameter: 55 mm Size: 111 x 22 x 52 mm Features • Multipower driver supplied with dip-switch for the selection of the output current. • IP20 independent driver, for indoor use. • Class II protection against electric shock for direct or indirect contact. • Driver for built-in use (DC MINI JOLLY DALI BI). • It can be used for lighting equipment in protection class I and II (DC MINI JOLLY DALI BI). • IP00, creepage distances and clearances rely on the final application according to IEC/EN 60598-1 (DC MINI JOLLY DALI BI). • Active Power Factor Corrector. • Analogical input (NTC) for thermal sensor connection. • Current regulation ±5 % including temperature variations. • Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm2 / AWG15). • Clamping screws on primary and secondary circuits for cables with diameter: PRI 5-8 mm / SEC 3-5 mm. • Protections: - against overheating and short circuits; - against mains voltage spikes; - against overloads. • Thermal protection = C.5.a

Read more less

18W 4PIN CF LAMPHOLDER

Read more less

This is a fused, single 36w high frequency, complete gear tray to run 1 x 36w 4ft T8 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

Read more less

Similar to the Mackwell B613/24 and Yuasa  2DH4-0F4/LS   Product Details  Battery pack ideal for providing necessary power for standard emergency lighting applications. Pack contains 2 cells inline with 6.3mm (+) and 4.8mm (-) wide spade terminals. NiCd Stick D Cells individually sized at approximately 62mm x 32mm. · 4-4.5AH duration · Single stick configuration · Dimensions: 33x118mm (DiaxL)

Read more less

Same as the Unicell CR2247-LI Spare for  SPM-L01-BP

Read more less

2/18650-B-C010F 7.2V 2600MA Li-Ion Please note these are built to order and usually take 5-7 days 

Read more less

5/7 days delivery as build to order

Read more less

2DH4-0L3 This is a Casell Lighting Emergency 2 Cell Battery Side By Side 2.4v 4.0ah, a D cell nickel-cadmium rechargeable battery with flying leads, ideal for use within emergency lighting applications. This battery is equivalent to the Yuasa 2DH4-0L3. These batteries are often used with emergency bulkheads, polo fittings and with LED panels and downlights for emergency uses. Typically used in offices, corridors, exit areas, schools and public buildings. Please note that Ni-Cd batteries are supplied with a residual charge and should be charged at the continuous charge rate before use.   Same as  2DH4-0L3A /rec20-2f R2C/SBS/TL

Read more less