125409 - DC MINI JOLLY DALI 10

TCI Dali driver - low voltage

Features

•Multipower driver supplied with dip-switch for the selection of the output current.
•IP20 independent driver, for indoor use.
•Class II protection against electric shock for direct or indirect contact.
•Driver for built-in use (DC MINI JOLLY DALI BI).
•It can be used for lighting equipment in protection class I and II (DC MINI JOLLY DALI BI).
•IP00, creepage distances and clearances rely on the final application according to IEC/EN 60598-1 (DC MINI JOLLY DALI BI).
•Active Power Factor Corrector.
•Analogical input (NTC) for thermal sensor connection.
•Current regulation ±5 % including temperature variations.
•Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm2  / AWG15).
•Clamping screws on primary and secondary circuits for cables with diameter: PRI 5-8 mm / SEC 3-5 mm.
•Protections:
- against overheating and short circuits;
- against mains voltage spikes;
- against overloads

Operation Mode

•Features DALI dimming (0/0,5 - 100 %):
- memory function for sets or light groups;
- recall of stored functions;
- compatible with standard DALI interfaces.
•(4) Default dimming AM+PWM: 1-25% PWM 2 kHz+25-100% AM.
•(4)Full PWM dimming (240 Hz - 1-100%) available by short circuit of NTC port during switch on of the driver. Same operation to reset to AM+PWM.

10w 15-40v at 250 mA
10w 2-28v at350 mA 
10w 2-25v at 400 mA 
10w 2-22v at 450 mA 
10w 2-20v at 500 mA 
10w 2-18v at 550 mA 
10w 20-16v at 600 mA 
10w 2-14v at 700 mA