Sub C , this page refers to the Ni-cd variant , they come in a variety of Ma ratings . If you cant see the formation you require on here please  call  01462 490066 If you require Ni-Mh please call the below number  Cell Size 22.2mm * 42mm 

Read more less

Sylvania FS-10 4-65W SINGLE 240V - S10 STARTER

Read more less

6w T5 225mm 9inch BL368nm Flykiller

Read more less

Battery Specification 1AAEM2-0 Ni-MH Rechargeable Battery 1.2v 2000mAh (2.0Ah) Model : 1AAEM2-0 Cell Size : AA Chemistry : Ni-Mh Voltage : 1.2v Capacity : 2000mAh (2.0Ah) Rechargeable : YES Terminal Style : Pip top cell Dimensions (approximate, +/-2mm) : 14mm Diameter x 50.5mm long Ni-MH Single Cell with pip top, plan cell option can be slotted in to battery holders. Commonly sold as replacement rechargeable batteries for cordless phones. Please note : Customised cells are built to order, allow a lead time of 1-3 days for this. Cell brand / colour / labelling / sleeve may differ from pictured depending on available stock.; Ni-MH Single Cell with pip top, plan cell option can be slotted in to battery holders. Commonly sold as replacement rechargeable batteries for cordless phones.; Please note :; Customised cells are built to order, allow a lead time of 1-3 days for this. Cell brand / colour / labelling / sleeve may differ from pictured depending on available stock.

Read more less

CI TCI BCC/SL - Linear mini electronic ballast 1x 26W Product Code: BCC 126 SL* Description- Compact size electronic ballast for built-in use - Suitable for connection to emergency equipment in compliance with EN-60598-2-22 - Can be used for lighting equipment in protection Class l and ll - Push in connector with retaining springs. Connector cross section 0.5 - 1.5 mm2 - Start with pre-heating for longer lamp life (cut-off function) - Protection against lamp disconnection (re-start with pre-heating), lamp failure or end of life - Ballast can be secured with slots for M4 screws Specification Lamp TC-D/E Lamp TC-T/E Cap G24q-3 Cap GX24q-3 Power (W) 26 Length (mm) 150 Width (mm) 22 Height (mm) 19 DATA SHEET

Read more less

Dimmable (TRAILING EDGE) 12 V electronic transformer for LED bulbs and halogen lamps IP20 independent transformer for lamps 12 Vac: 5 ÷ 70 W halogen lamps; 2,5 ÷ 50 W LED lamps (max. 4/5 lamps). Class II protection against electric shock for direct or indirect contact. Complete with terminal cover and cable retainer. Input and output terminal blocks on the same side (wire cross-section up to 0,5 - 2,5 mm2  / AWG20 - AWG13). Clamping screws on primary and secondary circuits for cables with diameter: min. 3 mm - max. 6 mm. Max. 18 mm cable peel-off. The transformer can be secured with slot for screws. Ultra compact size. Protections: against overheating and short circuits. against mains voltage spikes. against overloads.   Before use always check the compatibility with the LEDlamps of the application, including EMC verification of thecomplete system.

Read more less

TCI PROFESSIONALE 38W LED Driver DALI dimmable, Multi Current 300-1050Ma

Read more less

TCI MINIJOLLY 20W LED Driver Mains dimmable, Multi Current 250-900Ma Specification Control Dimming PHASE CUT / IGBT - TRIAC Nominal Input Voltage 220...240 Height 22 Diameter Input Current 250 mA Input Current 300 mA Input Current 350 mA Input Current 400 mA Input Current 450 mA Input Current 500 mA Input Current 550 mA Input Current 600 mA Input Current 650 mA Input Current 700 mA Input Current 750 mA Input Current 800 mA Input Current 850 mA Input Current 900 mA Output Voltage Minimum 15 Output Voltage Minimum 10 Output Voltage Minimum 5 Output Voltage Maximum 48 Output Voltage Maximum 44 Output Voltage Maximum 40 Output Voltage Maximum 36 Output Voltage Maximum 33 Output Voltage Maximum 31 Output Voltage Maximum 29 Output Voltage Maximum 27 Output Voltage Maximum 25 Output Voltage Maximum 23 Output Voltage Maximum 22 IP Rating IP 20 (Independent Use) Output Power Max 20 Output Power Min 11 Width 111 Depth 52 Used to be the  122402 

Read more less

TCI BRAND 70W METAL HALIDE BALLAST 50HZ  

Read more less

This is a TCI 55w 1050mA MaxiJolly Dali dimmable constant current LED driver. The full features list is as follows: •Multipower driver supplied with dip-switch for the selectionof the output current.•IP20 independent driver, for indoor use(DC MAXI JOLLY HC/2 DALI).•Class I protection against electric shock for direct or indirectcontact (DC MAXI JOLLY HC/2 DALI).•Driver for built-in use (DC MAXI JOLLY HC DALI BI).•It can be used for lighting equipment in protection class I.•Active Power Factor Corrector.•Analogical input (NTC) for thermal sensor connection.•Auxiliary output 12 V max. 100 mA.•Current regulation ±5 % including temperature variations.•Input and output terminal blocks on the same side(wire cross-section up to 1,5 - 2,5 mm2/ AWG15 - AWG13).•Clamping screws on primary and secondary circuits for cableswith diameter: min. 3 mm - max. 8 mm (DC MAXI JOLLY HC/2DALI).•Protections:- against overheating and short circuits;- against mains voltage spikes;- against overloads.•Thermal protection = C.5.a. Operation mode: Operation Mode•Light regulation 0/0,5 - 100 % by means of PUSH function, 0/1...10 V interface(I=1 mA) or 100 Kohm potentiometer and DALI.•Features DALI dimming:- memory function for sets or light groups;- recall of stored functions;- compatible with standard DALI interfaces.•Light regulation 0/0,5 - 100 % by means of PUSH function (mains voltage):- a short push to turn on and off;- a longer push to increase or decrease light intensity;- regulation automatically stops at minimum and maximum values;- for another on, regulation or off command, release the push button and givethe desired command again.- dimming level memory at mains restore.•Possibility to use PUSH function to 4/5 drivers without sync cable.•Maximum length of the cable, from push button to last driver, must bemax. 15 m / 49 ft. In case of applications where the cable is longer than15 m / 49 ft, keep this separate from the 110 - 240 Volt mains cable.•ATTENTION: only use normally open push buttons with no incorporatedwarning light.•Specific dimming terminal connection with a 0/1...10 Vdc electronicpotentiometer (0/1…10 V local dimming, double insulation required forexternal connection).•Max. 10 synchronised drivers of which only one can be controlled(1 Master + 9 Slaves).•Synchronization cable is separately supplied.

Read more less

TCI BCC/SL - Linear mini electronic ballast 1x 10W Product Code: BCC 116 SL* T5 4-6-8-13-14W T8 16W PLS 5/7/9/11W PLC 10W 2D 10-16W DATA SHEET Description- Compact size electronic ballast for built-in use - Suitable for connection to emergency equipment in compliance with EN-60598-2-22 - Can be used for lighting equipment in protection Class l and ll - Push in connector with retaining springs. Connector cross section 0.5 - 1.5 mm2 - Start with pre-heating for longer lamp life (cut-off function) - Protection against lamp disconnection (re-start with pre-heating), lamp failure or end of life - Ballast can be secured with slots for M4 screws Specification Lamp TC-D/E Cap G24q-1 Power (W) 10 Length (mm) 150 Width (mm) 22 Height (mm) 19

Read more less

Specification Cap W4,3 Power (W) 6-8-11-13 Length (mm) 150 Width (mm) 22 Height (mm) 19 DATA SHEET

Read more less