Driver LC 60W 24V bDW SC PRE2
premium series 24 V – dimmable (IP20)
With strain-relief
Product description
NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging.
basicDIM Wireless enables different dimming options
Forms automatically a wireless communication network with up to 250 nodes
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal lifetime up to 50,000 h
5 years guarantee
Typical applications
Cove lighting, facade accent lighting, ceiling integration
Technical details
24 V, 60 W
Small design (225 x 43 x 30.2 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
Output terminals (+/–) equipped twice for more flexibility in the application
Interfaces
basicDIM Wireless
ready2mains (configuration via mains)
Terminal blocks: 45° push terminals
System solution
Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
In connection with Flex accessories wire to PCB plug
Test the function of third party light sources before use at low dimming levels to ensure the dimming function works perfectly
Data sheet
basicDIM Wireless constant voltage LED ECG The 24V constant voltage LED driver LC 100/24V bDW SC PRE2 from the Premium series from Tridonic is suitable for luminaire installation or independent assembly. It has a rated power of 100 watts. Ideal areas of application are cove lighting, facade accent lighting and indirect ceiling lighting. In addition, the LED ECG is suitable for safety lighting systems in accordance with EN 50172. The LED driver automatically builds up a wireless communication network with up to 127 nodes. basicDIM Wireless enables various dimming options in a range from 1-100%, so that no external dimmer is required. Configuration via the network is possible with the help of ready2mains. CASAMBI-capable: light control via app The basicDIM Wireless LED driver also has the entire CASAMBI functionality: you can integrate it into any CASAMBI Bluetooth network and then control it very conveniently via the app on your smartphone or tablet. The housing of the LED ECG has a small design (295 x 43 x 30 mm) and a small cross-section. There are 45° push-in terminals for easy wiring. The output terminals (+/–) are duplicated – for more flexibility in use. The nominal service life is up to 50,000 hours. Tridonic offers a 5-year guarantee. We have summarized all information about the Casambi light management system again. Here you can download the CASAMBI app for free: for iOS/Apple/iPhone/iPad for iOS/AppleWatch for Android
Application specific colours for attractive product presentation
For spotlights and downlights
For operating with SELV Driver suitable
Excellent thermal management by COB technology
Uniform radiation with Dam & Fill technology
Integrated LED module
Cooling required
Flexible operating mode
Tridonic 350mA I-SELECT 2 PLUG Blue from Tridonic
Model: 28001110
This Tridonic resistor is a ready-to-use body used to set the output current value to 350mA in LED driver series PRE and EXC featuring the I-SELECT 2 interface (this resistor is not compatible with any driver with the I-SELECT generation 1 interface). When using this resistor at a value beyond the specified range the output current will be set to the minimum value (respective to when the resistor value is too large).
Technical Specifications
Accessory Type
Plug
Wattage
0.25 W
Manufacturer
Tridonic
Dimming?
Dimmable
Depth
4 mm
Length
21 mm
Type
Accessory
Width
5 mm
Resistor Power
0.25W
Product description
High-temperature NiCd battery pack for use with emergency lighting units
4 year design life
1 year guarantee from delivery date
Properties
Constant high-temperature operation
Temperature depending on the used emergency lighting unit (refer to respective emergency control gear data sheet)
Good charging properties at high temperature
High energy maintenance of the charged battery
Certified quality manufacturer
Casing material made of polycarbonate
1.0 m integrated double-insulated cable
1.0 mm² solid wire, pre-stripped
Suitable for emergency lighting equipment as per IEC 60598-2-22
This item is Obsolete the nearest alternative is the below
Alternative
Tridonic 89800393 EM PowLED HP Basic FX 80W LED Driver
Tridonic 89800393 EM powLED HP BASIC FX 104 LP 80W 200V Linear LED Driver - High power emergency unit for linear LED lighting systems.Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION.Emergency lighting function for use with single batteries for manual testing.Please see attached spec sheet for more information.
Colours:
As Per Picture
Volts:
200-250 v
Watts:
80 w
Length:
360 mm
Bulb/Lamp Type:
LED Driver
Size:
360 x 30 x 21
Height:
21 mm
Width:
30 mm
Weight:
275g
This item is Obsolete the nearest alternative is the below
Alternative
Tridonic 89800393 EM PowLED HP Basic FX 80W LED Driver
Tridonic 89800393 EM powLED HP BASIC FX 104 LP 80W 200V Linear LED Driver - High power emergency unit for linear LED lighting systems.Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION.Emergency lighting function for use with single batteries for manual testing.Please see attached spec sheet for more information.
Colours:
As Per Picture
Volts:
200-250 v
Watts:
80 w
Length:
360 mm
Bulb/Lamp Type:
LED Driver
Size:
360 x 30 x 21
Height:
21 mm
Width:
30 mm
Weight:
275g
