Accu - NiMH 4Ah 3A CON
Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet)
Low profile cross-section 21 mm
Good charging properties at high temperature
High energy maintenance of the charged battery
Certified quality manufacturer
In various configurations
Simple connection with plug-in system
Environmental friendly technology
High energy density
Low profile cross-section with removable end caps
Constant high-temperature operation
Good charging properties at high temperature
Electronic thermal battery management
High energy maintenance of the charged battery
Long shelf life
Integrated electronics
Safety features incorporated
Certified quality manufacturer
In various configurations
Simple connection with plug-in system
With polycarbonate fixing caps
Suitable for emergency lighting equipment as per IEC 60598-2-22
Product description
Fixed output built-in LED Driver
Constant current LED Driver
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current 250, 300 or 350 mA
Max. output power 65 W
Up to 90 % efficiency
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: metal, white
Type of protection IP20
Functions
Overload protection
Short-circuit protection
No-load protection
Burst protection voltage 0.5 kV
Surge protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Driver LCA 100W 24V one4all SC PRE
premium series
System solution
Product description
Dimmable 24 V constant voltage LED Driver for flexible constant voltage strips
Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
One4all interface and ready2mains enable different dimming options
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal life-time up to 50,000 h
5-year guarantee
Typical applications
Cove lighting, facade accent lighting, ceiling integration
Technical details
24 V, 100 W
Small design (295 x 43 x 30 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
Output terminals (+/–) equipped twice for more flexibility in the application
Interfaces
one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals
Tridonic ELA 600x600mm 3800lm 840 ADV2
Edgelit panel for direct recessed mount and surface or suspended mount with accessories
With pre-installed connection cable and integrated plug
For suspended ceiling grid measure of 600, 625 mm and 1,200 x 300 mm
IK rating IK02
Product colour (frame) RAL 9003
Diffusor material standard article: PS, diffusor material TPA article (fullfills the TPA requirements): PS
Lightguide material: PMMA
HE ... High Efficiency, NM ... Nominal Mode, HO ... High Output
Orders only in full carton quantities.
Long lifetime: 50,000 hours
The Tridonic EM 04 ST G2 (selftest) is one of the latest emergency inverters on the market. Designed to be used with linear and compact fluorescent lamps 16-26w with a 4 cell NiCad battery. Can be used with non dimmable and dimmable setups. See link for all product features Tridonic EM 04 SELFTEST G2 (NiCad) Manufacturer part number 89800201
Product description
Kit with emergency lighting LED driver, battery for 3 h duration and indication LED
For self-contained emergency lighting
For LED modules with a forward voltage of 10 – 54 V
SELV for output voltage < 60 V DC
Low profile casing (21 x 30 mm cross-section)
For luminaire installation
EM = Emergency
