Self contained emergency lighting LED driver for manual testing
For LED modules with a forward voltage of 10 – 54 V
SELV for output voltage < 60 V DC
Low profile casing (21 x 30 mm cross-section)
For luminaire installation
Compatible with Tridonic's LLE FLEX modules (ADV, EXC)
Nominal lifetime up to 100,000 h
EM = Emergency
Emergency lighting LED driver with DALI-2 interface and automatic test function
For self-contained emergency lighting
For LED modules with a forward voltage of 10 – 54 V
SELV for output voltage < 60 V DC
Low profile casing (21 x 30 mm cross-section)
For luminaire installation
Compatible with Tridonic's LLE FLEX modules (ADV, EXC)
EM = Emergency
Nominal lifetime up to 100,000 h
Self-contained emergency lighting LED driver with DALI interface
Non maintained operation
For LED modules with a forward voltage of 10 – 54 V
SELV for output voltage < 60 V DC
For luminaire installation
Compatible with Tridonic's LLE FLEX modules (ADV, EXC)
EM = Emergency
Nominal lifetime up to 100,000 h
Self-contained emergency lighting LED driver with self-testfunction_ Non maintained operation_ For LED modules with a forward voltage of 10 – 54 V_ SELV for output voltage < 60 V DC_ For luminaire installation_ Compatible with Tridonic's LLE FLEX modules (ADV, EXC)_ EM = Emergency_ Nominal lifetime up to 100,000 h
The Tridonic I-SELECT 2 PLUG 400MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001112
The Tridonic I-SELECT 2 PLUG 500MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001114
The Tridonic I-SELECT 2 PLUG 700MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001118
Fixed output LED driver
Can be either used built-in or independent with clip-on strain-relief (see accessory)
Independent LED driver with cable clamps
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Constant current LED driver
Output current 600 mA
Max. output power 25.2 W
Nominal lifetime up to 50,000 h
The Tridonic LC 25W 500mA LED Driver is a fixed output, constant current LED driver with a maximum output power of 25w. These drivers have an average life of 100,000 hours and a 5 year guarantee. . Tridonic article number: 28000679
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Can be either used build-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 % (min. 5 mA)
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Adjustable output current between 300 – 700 mA via NFC or DALI
Max. output power 28 W
Up to 86 % efficiency
Lowest power input on stand-by < 0.35 W
Nominal lifetime up to 100,000 h
Fixed output LED driver
Can be either used built-in or independent with clip-on strain-relief (see accessory)
Independent LED driver with cable clamps
Constant current LED driver
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current 350 mA
Max. output power 30 W
BIS approval mark for art. no.: 87500737, 87500739.
Nominal lifetime up to 50,000 h
