Please note LED Corn Lights operate directly from the mains requiring no additional control gearWhen upgrading metal halide, mercury or high pressure sodium lighting to LED corn lights the ballast and ignitor combination will have to be bypassed Voltage 85-265V Life Time 25000HRS ( Average )   Warranty 2 years Dimension  30* 110mm Beam Angle  360° Power 10W Lumen Output 1000Lumens CRI : 80  

Read more less

New Casell Filament LED Golf Ball 240v 4w E27 Dimmable. 440lm equal to a 40w standard Golf Ball Specification Part Number GBL4ES-82D-CA Category LED Lighting Type Golf Ball LED's Cap E27/ES Volts 240v Watts 4w Energy saving replacement for 40w Finish/Colour WarmWhite 2800K Life 20000 hours Length 72mm Diameter 45mm Manufacturer Casell Beam Angle  N/A EAN 0635635589110

Read more less

New Casell dimmable LED high bay unit with tri colour options 3000k (Warm White), 4000k (Natural White) and 5000k (Day White). 150w replaces 400w MH/Son 5year,50000 hr warranty IP65 4000kv Surge protection Commercial quality for use in industrial units, factories, warehouses etc. Instant on/off switching 0-10V dimming Full data sheets and design schemes available 110° Beam angle -40°C to +50°C operation

Read more less

117mm Lin. Halogen Class C 240v 230W R7s Same as the Bell 03845 & Crompton  ETH230R7

Read more less

100-240v 54w E27 3000k Corn 7020lm IP65

Read more less

Specification Category Halogen Lighting Type Halogen Spot Bulbs Cap GU5.3 Volts 12v Watts 50w Finish/Colour Clear Life 2000 hours Length 47mm Diameter 51mm Manufacturer Casell Lighting Beam Angle Flood Our Part Number M258-5H-CA Casell Branded MR16 dichroic flood Bulb. Excellent value for money and ideal to fit in locations with difficult access. Colour Temperature: 2900k

Read more less

Part Number SONT70-PLI-CA Category Discharge Lamps Type Sodium - Tubular Cap [?] E27/ES Volts This item is run by control gear in the fitting Watts 70w Finish/Colour [?] Yellow Sodium Life 28000 hours Length 156mm Diameter 38mm Manufacturer Casell Beam Angle [?] N/A EAN 0635635607036   Same as Venture 00407

Read more less

The CBP is a changeover relay unit configured to allow a luminaire to be operated normally from the switched lighting supply and also when the local 240V un-switched supply fails. The changeover then draws power from the emergency supply. This can be 50V, 100V or 240V DC central battery systems or 240V AC static inverter systems. The associated control gear/lamp must be capable of being powered by both 240V AC and the voltage of the central battery being used. upon (un-switched) main failure, the main changeover relay de-energises, and the unit changes over to an intermediate state approximately 0.5s. after this period the emergency supply hold of relay also de-energises and connects emergency supply to the load. Upon restoration of the un-switched supply, the emergency supply hold off relay energises and breaks the emergency supply to the load. Again, after the 0.5s delay the main changeover. relay energises, and connects the switched lighting supply to load. The unit fitted with a dimming inhibit relay, which can be used with dimming control gear to reset dimming level to 100% during the emergency situation. The module is suitable for use with LED, fluorescent and conventional control gear.   CBP Changeover Relay Specifications Low Profile Compact Enclosure Dimming Inhibit Relay Suitable for both Fluorescent and LED loads Operates with 50V, 110V and 240V DC Central Battery Systems The Associated Driver must be suitable for Central Battery Voltage Available with Strain Relief Cables for Remote Applications Operates with 240V AC 50/60Hz Static Inverter Systems CBP Input Voltage 230-240 Volts AC – 50/60Hz Power Rating Maintained 2.0W 14mA λ = 0.58 Changeover Relay Rating 3A 240V Ambient Temperature 5°C to 50°C Tc Point Top Centre of case Tc Max Module 70°C Module Dimensions 178mm x 30mm x 22.5mm Module Fixing Centres 175mm Overall Weight 0.11kg

Read more less

CBR Changeover Relay Modules The CBR is a changeover relay unit configured to allow a luminaire to be operated normally from the switched lighting supply and also when the local 240V un-switched supply fails. The changeover then draws power from the emergency supply. This can be either 50V, 110V or 240V AC/DC systems or 240V AC static inverter systems.

Read more less

CBU-TED-LR CBU-TED-LR is a Bluetooth-controlled, Casambi-enabled, long-range trailing edge dimmer for dimmable incandescent, halogen, and LED lamps, and LED control gear. With Casambi’s CBU-TED-LR any dimmable load can be easily converted to become a part of a Casambi mesh radio network. The CBU-TED-LR can also be converted to a mains-activated sensor device and, for example, be installed behind a traditional wall switch, inside a luminaire, or into a ceiling outlet box. This device can be controlled using the Casambi App, which is available for both iOS and Android devices, as well as with traditional wall switches. The Casambi App can be downloaded free of charge from the Apple App Store and Google Play Store. Different Casambi-enabled products can be used for anything from basic individual fixture control to the formation of vast, full-featured, intelligent, mesh radio-network-based lighting control systems. Input Voltage: 85–240 VAC Frequency: 50–60 HzMax. mains current: 0,43 A No-load standby power: < 0,3 W Output Dimming method: trailing-edge phase control Max. output power: 100 W @ 230 VACMax. output current: 0,43 AMin. load requirement: 1 W Max. inrush current: 10 A, 100 ms Radio transceiver Operating frequencies: 2402…2480 MHz Maximum output power: +8 dBm Operating conditions Ambient temperature, ta: -20 to +45°CMax. case temperature, tc: +75°CLocation of tc point: bottom side, underneath output connector. The tc point is marked on the enclosure. Storage temperature: -25…+75°CMax. relative humidity: 0…80%, non-condensing Connectors Wire range, solid: 0,5–1,5 mm2, 16–20 AWGWire strip length: 6-8 mm Mechanical data Dimensions: 40,4 x 36,2 x 14,0 mmWeight: 15 gDegree of protection: IP20 (indoor use only) Certifications FCC ID: 2ALA3-CBUTEDLRIC: 22496-CBUTEDLRUL Listed, 5LE6/E494741

Read more less

Product information CMH lamps combine HPS technology (providing stability, efficiency & uniformity) and Metal Halide technology (providing bright white quality light) to produce highly efficient light sources with good colour rendering and consistent colour performance through life. This is achieved by using the ceramic arc tube material from the Lucalox lamp, which minimises the chemical changes inside the lamp through life. When combined with the halide doses used in Metal Halide lamps the quality and stability of the dose maintains the colour consistency. Hence the name CMH. Metal halide lamps, traditionally made with quartz arc tubes, are prone to colour shift through life and lamp-to-lamp colour variation. Some of the dose, e.g. sodium, (an important component of metal halide lamps), can migrate through quartz to cause colour shift and loss of light through life. The ceramic arc tube resists this material loss, can be manufactured to tighter tolerances and withstands a higher temperature to provide a more constant colour. Single ended format Single ended Ceramic Metal Halide lamps are designed to provide symmetrical beam distribution using the axial configuration of the discharge arc. A variety of beam angles are possible and adjustable beam control can be built into the luminaire. This compact lamp shape enables luminaire size to be minimised and the bi-pin lamp base enables easy changing with front access. Features • Consistent colour over life • Good colour uniformity lamp to lamp Applications areas • Bright light – in a very compact size • Excellent colour rendition • Improved reliability due to 3 part design • Up to 97 Lumens per Watt (LPW) efficacy • Up to 18,000 hours life • UV control • Colour temperatures 3000K, 4200K DATA SHEET Retail Office Hospitality Showbiz Commercial areas / city beautification / architectural Specification summary Description Wattage Colour Product Code Operating conditions Burning position Universal Luminaire characteristics Enclosed Notes: 1) Lamp voltage in the luminaire should not increase by more than 5V when compared to lamp voltage in free air. 2) Ballast protection required, according to IEC61167. Electrical characteristics * * The specification provides typical performance data for 70W operating from a 50Hz mains sinewave supply at rated power, and for 20w & 35w operating on typical electronic ballast. Actual values depend on ballast, supply voltage and application. 20W to be used only with an electronic ballast. CMH20/TC/UVC/U/830/G8.5 PLUS TU 20 3000K 93095263 CMH35/TC/UVC/U/830/G8.5 PLUS TU 35 3000K 93095264 CMH35/TC/UVC/U/942/G8.5 TU 35 4200K 93095366 CMH70/TC/UVC/U/830/G8.5 PLUS TU 70 3000K 93095265 CMH70/TC/UVC/U/942/G8.5 TU 70 4200K 93095367 20W 35W 35W 70W 70W General Units 3000K 3000K Plus 4200K 3000K Plus 4200K Product code 93095263 93095264 93095366 93095265 93095367 Nominal wattage [W] 20 35 35 70 70 Format Single ended Single ended Single ended Single ended Single ended Bulb type T4.5 T4.5 T4.5 T4.5 T4.5 Bulb material UVC Quartz UVC Quartz UVC Quartz UVC Quartz UVC Quartz Bulb finish Clear Clear Clear Clear Clear Arc gap [mm] 3.4 4.7 4.3 6.3 5.5 Base G8.5 G8.5 G8.5 G8.5 G8.5 Lamp power (rated) [W] 20 39 39 72 72 Weighted Energy Consumption [kWh/1000 hrs] 21.78 43.40 44.24 79.20 80.43 Lamp voltage [V] 90 90 90 85 90 Typical voltage change with burning position – vertical to horizontal [V] 8 8 8 8 8 Lamp current [A] 0.226 0.43 0.43 1.01 0.98 Max. ignition voltage [kV] 5.0 5.0 5.0 5.0 5.0 Min. ignition voltage [kV] 3.0 3.0 3.0 3.0 3.0 Extinction voltage (% of rated input voltage) [%] 80 (Max.) 90 (Max.) 90 (Max.) 90 (Max.) 90 (Max.)

Read more less

Dimmable energy efficient CC compact fluorescent lamp. Widely used with slim profile decorative and tough exterior luminaires.   Now obsolete, Osram brand will be sent   Suitable for use in emergency luminaires. 4-pin cap dimmable when used with suitable control gear - Separate ballast/control gear required. 10,000 hour life 5,000 switching cycles GR10q 4-Pin cap 3500K white colour temperature Colour rendering index ≥82 Suitable for dimming Recommended for indoor use only 2 year warranty Dimmable energy efficient CC compact fluorescent lamp. Widely used with slim profile decorative and tough exterior luminaires. Suitable for use in emergency luminaires. 4-pin cap dimmable when used with suitable control gear - Separate ballast/control gear required.   Stock Code: CLC28W4PIN

Read more less