Products
-
Bright Source 2/4000DHB-CA 2 Cell Emergency Battery Stick 2.4v 4.0ah same 2DH4-0L4
This is a Casell lighting Emergency 2 Cell Battery Stick 2.4v 4.0ah, a D cell nickel-cadmium rechargeable stick with flying leads, ideal for use within emergency lighting applications. This battery is equivalent to the Yuasa 2DH4-0L4. These batteries are often used with emergency bulkheads, polo fittings and with LED panels and downlights for emergency uses. Typically used in offices, corridors, exit areas, schools and public buildings. Please note that Ni-Cd batteries are supplied with a residual charge and should be charged at the continuous charge rate before use. Same as 2DH4-0L4 RNCD2 Robus Same as ELP B002 R2C/ST/TL
£5.95
-
yuasa 2/4000DHB-T Emergency Battery 2.4v 4.0Ah Ni-Cd
2/4000DHB-T same as the below Similar to 9005938 B613/24 Model : 2DH4-0T4 Voltage : 2.4v Capacity : 4.0ah Weight : 260g Dimensions : 32.3 mm Diameter x 118 mm Long Yuasa 2DH4-0T4 2.4v 4.0Ah Ni-Cd battery for use in emergency lighting. Terminals : 4.8mm wide tags each end Battery Type: High temperature nickel-cadmium battery (Ni-Cd) for use in emergency lighting. --------------------------------------------- YUASA BATTERY SALES(UK) LTD Sealed Rechargeable Battery KRMT33/62 2DH4-0T4 2.4v High Temp D CD --------------------------------------------- Alternative to : Other : RNC2D Other : 03303 Other : BT05365 Other : 14-003 GP GP450DKT2A1H RS: 2DH4-0T4-RS RS 508-2934 RS 675-5686 SAFT 131171 YUASA 2DH4-0T4 YUASA 2DH4-OT4
£8.05
-
Easy Control Gear 2/400LAHT-A-C001F 2.4V SBS LAHT NI-MH C001F Connector
£20.28
-
Easy Control Gear 2/VHT7/5CSB 2.4V 4Ah Tagged SPA5 same as 96333806
60*22mm /cell VHT Ni-MH 2.4V Tagged 2/VHT7/5/CS/B-SPA5
£24.85
-
Prolite 20-60va Electronic Transformer for Low Voltage Lamps (Preleaded)
This is a Prolite 20-60va dimmable transformer for low voltage halogen lamps with a wattage between 20 - 60w. This transformer has a surge, overload and short circuit protection. It features an IP20 rating and polycarbonate plastic body. Life expectancy is 30,000 - 35,000 hours.Dimensions: 123x39x26mm
£9.58
-
Victory 200W HOT PLATE HEAT LAMP R7 JACKET Boxed in 10
200w double ended push fit linear halogen catering light bulb. Jacketed Infrared Quartz Heat Bulb 118mm Lamp Light Food Safe Push Fit Replacement lamps for infra red heaters and drying applications. Catering jacketed heat lamps are used in heating lamps to heat food. Infra red bulbs are commonly used in restaurants, brasseries and cafe’s to keep prepared food warm before serving. Length: 118mmCap : R7s lamp capVolt: 240v,Wattage: 200w,Clear with ceramic terminal ends.
£85.44
-
lifud 220-240V LIFUD No Flicker Driver 33-40V Output 1500mA 60W LF-GIF060Y(H)
Characteristics 220-240V LIFUD No Flicker Driver 33-40V Output 1500mA 60W LF-GIF060Y(H) Power: 60 W Power Factor: 0.90 Voltage: 220-240V AC Frequency: 50-60 Hz Driver Output: 33 - 40V DC // 1500 mA Protection Class: II Use: Indoor IP Protection: IP20 Flicker Free: YES Material: PC Size: 29.3x139.5x43 mm Height: 29.3 mm Width: 139.5 mm Length: 43 mm Total Weight: 0.12 kg Working Temperature: -30°C ~ +50°C Warranty: 3 Years Certifications: CE,CB,ENEC,CCC,RCM Brand: LIFUD Accessories
£36.98
-
22185104 PCA 2x14/24 T5 EXCEL one4all lp Y II
Product description• Processor-controlled ballast with y II inside• Highest possible energy class CELMA EEI = A1 BAT1• Noise-free precise control via DALI orDSI signal, switchDIM or corridorFUNCTION• Nominal life up to 100,000 h (at ta 50 °Cwith a failure rate max. 0.2 % per 1,000 h)• Multi-lamp management• OEM-specific reserved memory areas• Extended DALI commands• 5 years guaranteeInterfaces• DALI• DSI• switchDIM (with memory function + selectable dimming • corridorFUNCTION (3 preprogrammedprofiles + individually programmable)• Integrated SMART interface for function with allSMART Sensors and SMART plugs of the y II rangeFunctions• Intelligent Temperature Guard (overtemperature protection)• Intelligent Voltage Guard (overvoltage indicationand undervoltage shutdown)• Optimum filament heating in any dimmer setting• Disconnection of filament heating from a dimming level of approx.90 % for maximum energy efficiency (SMART-Heating concept)• Fade rates between 100 ms and 90 s (min. – max.)• corridorFUNCTION with ambient light control• Automatically triggered emergency lighting value in DC mode 15 %,can be set between 1 and 100 %• For emergency lighting systems as per EN 50172• Automatic start after replacement of defective lamps
£78.00
-
Knightsbridge 230V 10A IP66 Photocell control sensor OSPCKIT
This sensor comes complete with a mounting bracket and 2 cable gland entries from base of unit for input and output. This sensor can turn on or off a light automatically according to the ambient light level. Ideal for street lighting, car park lighting, garden lighting etc. Voltage: 230V AC ~ 50/60Hz IP66 rating Max. Load: 10A Max. Incandescent load: 1000W Max. LED load: 300W Working temperature: - 20°C to +40°C Working humidity: less than 93% RH Ambient Light level: 10-50 Lux (adjustable) DOWNLOAD Datasheet Declaration of Conformity UKCA Declaration of Conformity CE Instruction Manual
£13.69
-
Knightsbridge 230V IP20 3.5W LED Emergency Downlight 5500K (maintained/non-maintained use) EMPOWER4
The EMPOWER4 range offers a complete solution in one package. Equipped with a Lithium (LiFePO4) battery, it ensures a minimum 3-hour illumination and a long lifetime. A corridor lens included providing use throughout the project. Comes with a separate green LED charge indicator Pre-wired battery pack for ease of installation Maintained or non-maintained use options Manual emergency test Lithium (LiFePO4) battery Corridor lens accessory included in the box 5500K
£39.74
-
Knightsbridge 230V IP20 3W LED Emergency Downlight EMPOWER3
230V IP20 3W LED Emergency Downlight. 230V IP20 3W LED Emergency Downlight. Polycarbonate body. For emergency illuminating of exit routes. Supplied complete with aluminium, white, and black bezels. Compact energy efficient Li-ion battery 6000K 120lm Non-maintained use only DOWNLOAD Datasheet Declaration of Conformity UKCA Declaration of Conformity CE Instruction Manual
£16.78
-
Knightsbridge 230V IP20 Wall Mounted LED Emergency Exit sign (maintained/non-maintained)
230V IP20 6W LED Exit sign Light-weight metal frame construction and interchangeable PC legends Supplied as standard with Arrow UP legend Maintained or non-maintained use options Ranges of legends available separately
£34.54
