ELP B104T +BL020 CONNECTOR 6.4V 1.8Ah 3 Wire, replaces the B069
ELP B104T
The B104T replaces the, ELP B069 2 Cell 6.4V 1.5Ah LiFePO4 Side-By-Side Emergency Lighting Battery which has been upgraded to a 3-wire version ( B104T ) as the latest version of the control gear standard BS EN 61347-2-7 has a section that calls for Lithium batteries in emergency lighting equipment to not start charging if they are too hot or too cold.
The 2 wire adaptor is also included, to ensure the B104T is backwards compatible if replacing the B069 within the ELP Access range.
Part number B104T ( BL020 Included )Chemistry LiFePO4Voltage 6.4VCapacity 1800mAhSize 70mm x 38MM x 22mmLead length 50mm
Nominal Voltage (V) 3.2 Volts Nominal Capacity 4.8Ah Rated Wh 15.36Wh Battery Type 1IFpR19/66-3 3 Hour Rated Current 1200mA Charging Cut-off/Restore V 3.65V/3.45V Cell Format 1S3P Battery Temperature Sensor NTC Temperature: Standard Temperature Range 5 to + 55°C Storage (within 1 Year) 0 to + 25°C
Please note tridonic out of stock until May , a quality unbranded will be sent in its place
LiFePO4 Battery pack 3.0 Ah
Lithium Iron Phosphate cells (LiFePO4)
Product description
High temperature LiFePO4 cells for use with EM ready2apply surface mounted emergency lighting units
6 year design life (up to 30 °C ambient temperature)
4 year design life (up to 40 °C ambient temperature)
3 years guarantee battery for EM R2A BASIC
4 years guarantee battery for EM R2A ST/PRO
Properties
Certified quality manufacturer
Charge efficiency > 90 %
Low self discharge
Simple connection with plug-in system
Protection and monitoring circuit built into battery enclosure
Deep discharge protection
Suitable for emergency lighting equipment as per IEC 60598-2-22
Data sheet
Liteplan no longer make this item , however we have a supplier whom can still supply them to the same spec but wont have a Liteplan label on them
https://www.liteplan.com/images/products/Batteries/NiCd/3-CD45-PT-AS.pdf
3DH4-0L4B YUASA NICAD 3.6V 4AH H/T LEAD
You are viewing the Yuasa 3.6v D cell, nickel cadmium rechargeable 3 cell battery stick for use with emergency lighting applications. This battery has a capacity of 4ah and comes with flying leads. The dimensions of the Yuasa emergency battery are 32.5mm x 178mm. Please note that Ni-Cd batteries are supplied with a residual charge and should be charged at the continuous charge rate before use. The Yuasa part number: 3DH4-0L4
· 3 x AA Cell NiMH batteries in line
· Cable length: 200mm
· Pack Capacity: 2200mAH
· Operating temperature: 10°C to 40°C
· In accordance with EN 60598-2-22
