Products
-
Integral LED Integral LED Constant Voltage Driver 30W 24Vdc Ip20 Triac Dimmable 200-240V Input 1.5W Min Load Ecopac Power - ELED-30P-24T
This 30W constant voltage LED driver operates 200-240VAC input range. The LED driver provides 24V constant voltage and is TRIAC dimmable suitable for both leading edge dimmers and trailing edge dimmers
£44.29
-
Integral LED Integral LED Constant Voltage Driver 320W 48Vdc Ip65 Non-Dimm 90-305V Input - HLG-320H-48A
This non-dimmable 320W constant voltage LED driver operates 90-305VAC input range. The LED driver provides 48V constant voltage for applications such as 48V LED strip lighting.
£177.81
-
Integral LED Integral LED Constant Voltage Driver 60W 12Vdc Ip20 Triac Dimmable 200-240V Input 6W Min Load Ecopac Power - ELED-60P-12T
This 60W constant voltage LED driver operates 200-240VAC input range. The LED driver provides 12V constant voltage and is TRIAC dimmable suitable for both leading edge dimmers and trailing edge dimmers
£72.86
-
Integral LED Integral LED Constant Voltage Driver 60W 24Vdc Ip20 Triac Dimmable 200-240V Input 6W Min Load Ecopac Power - ELED-60P-24T
This 60W constant voltage LED driver operates 200-240VAC input range. The LED driver provides 24V constant voltage and is TRIAC dimmable suitable for both leading edge dimmers and trailing edge dimmers
£73.98
-
Knightsbridge IP20 12V 50W DC Dimmable LED Driver - Constant Voltage 12DC50D
12V IP20 50W constant voltage dimmable driver Max. output 50W Dimmable with most trailing edge dimmer Protections; open circuit, short circuit, overload, over temperature SELV output Protection Class II For internal use only Please check dimmer compatibility before installation
£35.07
-
Knightsbridge IP20 350mA 12W LED Dimmable Driver - Constant Current 1W350DA
18-35V 350mA 1-12W Constant current driver Dimmable with most trailing edge dimmers LENGTH 98 mm HEIGHT 22 mm WIDTH 39 mm
£24.08
-
Knightsbridge IP20 360° PIR Sensor - Recess/Surface Mounting OS009 replaced with OS0025W
PIR ceiling sensor. IP20 rated for indoor use only Recess fitting Cut out: 62mm 360° field of detection 6m range Adjustable Lux Adjustable time: 10 seconds to 8 minutes Can be wired in parallel Switching capacity: Max. 1200W Incandescent / Max. 300W LED Certified to EN 60669-2-1, EN 60669-1, EN 55015, EN 61547, EN 61000 Supplied in Knightsbridge box DOWNLOAD Datasheet Declaration of Conformity UKCA Declaration of Conformity CE Instruction Manual
£14.83
-
Knightsbridge IP20 700mA 25W LED Dimmable Driver - Constant Current 25W700DA
18-36V 700mA 25W Constant current driver Dimmable with most trailing edge dimmers CONSTRUCTION Polycarbonate FINISH White CLASS II IP RATING IP20 PRIMARY VOLTAGE 230V 50Hz LENGTH 120 mm HEIGHT 28 mm WIDTH 45 mm
£17.66
-
Philips ISOLDE CLEO HPA 400 S PHILIPS R7S LAMP (117MM)
Philips iSOLde Cleo HPA 400 S professional tanning lamp with R7s caps. High quality, long lasting excellent performance. Philips code 919220245. Popular UV sunbed lamp for professional facial boosters in half and full body Philips solariums. Voltage 240vWattage 400wLamp life 800 hoursLength 117mm
£29.80
-
Philips iSOLde CLEO HPA 400/30 S
The HPA 400/30 S tanning lamps are often used as the facial tanning lamp in a lot of equipment like in all Alisun home tanning sunbeds. Successor of the Philips HPA 400/30 S lamp. Specifications Article nr. 350804 mpn 919159545 EAN 4050114003875 Brand iSOLde Length 10.4 cm Power 400 W Reflector No Lamp type Face, High pressure (HPA) Lifetime in hours Factory warranty: 800 hours
£34.29
-
Knightsbridge Knightsbridge EMLED4 230V IP65 3W LED Emergency Bulkhead
230V IP65 3W LED Emergency Bulkhead Ideal for interior or exterior use, illuminating routes and exits - 3 hour Maintained and Non-Maintained - Hinged gear tray for simple installation - Push-fit connector block - Side and rear conduit entry - Complete with self-adhesive legend kit 115lm (AC/DC mode), 5500K
£18.73
-
Knightsbridge Knightsbridge TNXT TENAX 230V Wattage and CCT Adjustable LED Gear Tray
Knightsbridge's latest innovation is the wattage and colour-adjustable LED gear trays. It reduces complexity by combining triple wattage and colour adjustments into a single gear tray. Secured to the casing* via four butterfly clips paired with the push-fit terminal block, ensures a speedy installation. The gear trays are compatible with the Tenax One and Tenax Quad range of casings. *Casing is not included and must be purchased separately. - 3000K/ 4000K/ 5700K adjustable - 10W/ 15W/ 20W adjustable - Push-fit terminals with loop-in-loop-out capabilities - Options available: standard, emergency, self-test emergency, microwave sensor, emergency with a microwave sensor, self-test emergency with a microwave sensor - 10W - 1,200lm at 4000K** - 15W - 1,670lm at 4000K** - 20W - 2,100lm at 4000K** **Performance for the gear tray inside the casing.
£84.83 £20.48