LitePlan EMTrac/48/119/W EMTrac/48 – 48V Track Mounted Emergency LED

Read more less

FED Conversion Range Specifications Slim Module Suitable for Linear Applications Long Life LiFePO4 Batteries Strain Relief Module with Fitted Cables Suitable for a Wide Range of LED Loads ENEC Approved BSI Kitemark Approved Mains Supply Voltage 230-240V AC 50/60Hz Emergency Duration 3 Hours Recharge Period 24 Hours LED Current Limit 320mA Battery Current Limit 1100mA Cut off Voltage 2.5V   Double Pole Changeover Relay Additional 3rd Pole Relay Compact Design - will fit through a 45mm aperture The FED/3 has ENEC and BSI Kitemark Approval, itis a high quality 3 hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is available in 2 versions, one with PCB terminal blocks, for internal mounting inside a luminaire, or a pre-wired version for mounting remotely from the luminaire where integral mounting is not possible. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The module is supplied with a green charge healthy indicator LED. This range pioneers the use of LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. 

Read more less

• Suitable for Most Compact Fluorescent Lamps • Deep Discharge Protection • Four Pole Changeover Relay • Fifth Pole Relay for Ballast Protection • High Temperature NiCd Batteries • Compact Module Dimensions • Can be Provided in Various Remote Enclosures • Operates One Lamp Within Multi Lamp Circuits A 3 hour emergency lighting conversion kit which operates with high temperature 7.2V NiCd batteries. The unit is designed to suit a wide range of fluorescent tubes. Please see lamp compatibility chart to see the BLF that will be achieved for your particular tube.   Technical Details: Mains Supply 230-240V AC 50/60 Hz Power Rating 22mA λ = 0.88 Emergency Duration 3 hours Battery Type 7.2V 4.5Ah NiCd Charge Current 200mA Cut-Off Voltage 6V Discharge Current 1.05 Amp Tc Point and Temperature 70 °C Case Side Module Dimensions (LxWxH) 165mm x 45mm x 29mm Battery Dimensions (LxØ) 2 x 220mm x 37mm Overall Kit Weight 1.1Kg

Read more less

The Liteplan HRN 3 Conversion Kit is a 3hr emergency lighting conversion kit suitable for 4-36w fluorescent lamps. This unit is to suit multiple 4-pin fluorescent lamp wattages and circuits. 4-pole change over relay plus additional 5th pole for HF ballast isolation. This conversion kit has these additional benefits :- 4-pole changeover relay, Additional 5th pole relay, Deep discharge protection, Low profile enclosure, Constant current charger, High temperature niCd cells. The HRN range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm Green charge healthy LED indicator and mounting collar, 3/4/5 Cell kits are supplied with NiCd batteries and AMP irreversible battery connector.

Read more less

LitePlan LED/43/CO/W LED/43/CO Corridor Optic

Read more less

This item is now obsolete, if orderd you will be sent the ELP  OM680LP  This is a Lite-Plan LLS/6 emergency inverter module for use with 21-80w lamps. This module should be used with a 6 cell emergency lighting battery. Technical Specifications Control Gear Type Conversion Module Manufacturer Lite Plan Dimming? Non-Dimmable Height 20 mm Input Voltage 220-240 V Length 292 mm Max Wattage 80 W Type Control Gear Width 32 mm Discharge Current 200mA Compatible Lamp Type T5 Control Gear Technology LED

Read more less

A split pack designed to fit through up to a 60mm aperture of a mains voltage downlight. The unit has been designed to provide full output in emergency mode and will power all loads up to 8W, capable of accepting 230Vdc. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery.

Read more less

This is a Liteplan NDA/3/80 3 cell emergency module for use 2 with 2-30 LEDs in series (6-80v). Module size: 165mm x 45mm 29mm. Fixing points 155mm.

Read more less

This item is now obsolete, Liteplan have replaced it with  the NLP/1-KIT https://www.easy-controlgear.com/products/nlp-conversion-range?gclid=CjwKCAjwsKqoBhBPEiwALrrqiKgYpSLti7QpU2D7_1IEtRnu428YBvBrBy82bX31NsrEZVAaGkONmBoC-JgQAvD_BwE   This is a Liteplan NED/3 3 cell emergency module for use 2 with 2-20 LEDs in series (6-60v). LitePlan NED/3 Conversion Module Only from Lite-Plan Model: NED/3/MOD Technical Specifications Control Gear Type Conversion Module Accessory Type Ballast Manufacturer Lite Plan Dimming? Non-Dimmable Input Voltage 220-240 V Length 165 mm Type Control Gear Batteries 4.5Ah NiCd Batteries 3.6V Charging Time 24 Hours IP Rating IP20 Emergency Duration 3 Hours Discharge Current 1000mA Control Gear Technology Fluorescent

Read more less

OBSOLETE, Liteplan replacement detailed below  Obsolete, Liteplan has replaced it with the NLP/1S/80-K . This is what you will be sent including the new battery which you have to use. Do not use the existing battery a new one will be supplied  as per the below image    LitePlan NED/3/80-K Module Battery and Charge LED Indicator from Lite-Plan Model: NED/3/80/KIT The NED/3/80 Kit is a similar product to the NED/3 Kit, with the voltage range extended from 6-60 Volts to 6-80 Volts converting 2 to 30 LED chips in series. Liteplan's NED emergency lighting conversion modules have been specifically designed to convert a wide range of LED types and automatically adjust to the output current to provide the best match between battery and load, ensuring maximum lumination to battery duration. This product has a load current limit of 2A with an average emergency power of 2.6W. Technical Specifications Control Gear Type Conversion Module Accessory Type Ballast Wattage 5W W Manufacturer Lite Plan Dimming? Non-Dimmable Length 165 mm Type Control Gear LED Current Limit 320mA Bat. Current Limit 1100mA Mains Supply 230-240V AC 50/60 Hz Charge Current 200mA Nominal Recharge Period 24 Hours Compatible Lamp Type LED Control Gear Technology LED

Read more less

Our range of Nickel Cadmium (NiCd) batteries are offered in various different Voltages, Capacities and Layouts. All batteries are supplied with plugs and leads and where required end caps for panel fixing. Order Codes Order Code Description 3-CD45/S/AS 3.6V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket 3-CD45/P/AS 3.6V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket 3-CD45/PT/AS 3.6V 4.5Ah NiCd Battery Housed in a Poly-carbonate Case With Twin Socket 4-CD45/S/AS 4.8V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket 4-CD45/P/AS 4.8V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket 5-CD45/S/AS 6V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket 6-CD45/TS/AS 7.2V 4.5Ah NiCd Battery in a Twin Stick Formation With End Caps and Twin Socket 6-CD45/P/AS 7.2V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket

Read more less

LitePlan NLP/1-K NLP/1 Basic Conversion

Read more less