Product description
Independent fixed output LED Driver
For luminaires of protection class I and protection class II
For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
Temperature protection as per EN 61347-2-13 C5e
Selectable output current between 350, 500 and 700 mA
Max. output power 20 W
Up to 85 % efficiency
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Interfaces
Terminal blocks: 0° screw terminals
Functions
Overload protection
Short-circuit protection
No-load protection
Overtemperature protection
Burst protection voltage 1 kV
Burst protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Typical applications
For spot light and downlight in retail and hospitality applications
For panel light and area light in office and education application
This item is now obsolete
Driver LC 20W 350mA fixC C SNC
essence series
Product description
Fixed output built-in LED driver
Constant current LED driver
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current 350 mA
Max. output power 18.9 W
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Functions
Overload protection
Short-circuit protection
No-load protection
Burst protection voltage 1 kV
Surge protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Driver LC 25W 250/300/350mA fixC lp SNC2
Linear drivers
Data sheet
Product description
Fixed output built-in LED driver
Constant current LED driver
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current 250, 300 or 350 mA
Max. output power 25 W
Up to 88 % efficiency
Nominal lifetime up to 50,000 h
5 years guarantee (conditions at www.tridonic.com)
Driver LC 25W 350–1050mA flexC SC EXC
excite series
With strain-relief
Product description
Constant current LED driver
Can be either used built-in or independent with clip-on strain-relief (see accessory)
Adjustable output current between 350 and 1,050 mA via ready2mains Programmer or I-SELECT 2 plugs
Max. output power 25 W
Up to 86 % efficiency
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Interfaces
ready2mains (configuration via mains)
Terminal blocks: 45° push terminals
Functions
Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to high efficiency
Flexible configuration via ready2mains and I-SELECT 2
Typical applications
For downlight, spotlight and decorative applications
Data sheet
Driver LC 35W 24V bDW SC PRE2
premium series 24 V – dimmable (IP20)
With strain-relief
Product description
NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging.
basicDIM Wireless enables different dimming options
Forms automatically a wireless communication network with up to 250 nodes
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal lifetime up to 50,000 h
5 years guarantee
Typical applications
Cove lighting, facade accent lighting, ceiling integration
Technical details
24 V, 35 W
Small design (195 x 43 x 30.2 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
1 output channel (+/–)
Interfaces
basicDIM Wireless
ready2mains (configuration via mains)
Terminal blocks: 45° push terminals
System solution
Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
In connection with Flex accessories wire to PCB plug
Test the function of third party light sources before use at low dimming levels to ensure the dimming function works perfectly
Data sheet
Data sheet
Replaces the 28000411/87500852
Product description
Constant voltage LED driver
Output voltage 24 V
Max. output power 35 W
Dimmable via external PWM LED dimmers attached on output side
For luminaires of protection class I and protection class II
The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging
Nominal lifetime up to 50,000 h
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
Data sheet
Replaces the 28000411/87500852
Product description
Constant voltage LED driver
Output voltage 24 V
Max. output power 35 W
Dimmable via external PWM LED dimmers attached on output side
For luminaires of protection class I and protection class II
The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging
Nominal lifetime up to 50,000 h
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
Product description
Independent fixed output LED driver
For luminaires of protection class I and protection class II
For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
Temperature protection as per EN 61347-2-13 C5e
Adjustable output current between 700, 800 and 1,050 mA
Max. output power 35 W
Up to 87.5 % efficiency
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Interfaces
Input terminals: 0° screw terminals
Output terminals: 45° push terminals
Functions
Overload protection
Short-circuit protection
No-load protection
Overtemperature protection
Burst protection voltage 1 kV
Burst protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Typical applications
For spot light and downlight in retail and hospitality applications
For panel light and area light in office and education application
Driver LC 35W 800mA fixC SR SNC2
essence series
Product description
Independent driver with strain-relief housing
For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
Temperature protection as per EN 61347-2-13 C5e
Output current 800 mA
Max. output power 35 W
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Push-in terminals
2 separate strain relief parts for input and output cables with highly robust clamps
Functions
Overload protection
Short-circuit protection
No-load protection
No output current overshoot at mains on/off
Burst protection voltage 1 kV
Surge protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Typical applications
For spot light and downlight in retail and hospitality applications
For panel light and area light in office and education application
Driver LC 38W 250-350mA flexC lp ADV
advanced series non-SELV
Product description
LED Constant current LED driver for luminaire installation
New version DC operating with EL marking
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current adjustable between 250 – 350 mA
Max. output power 38 W
Up to 88.5 % efficiency
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Low profile metal casing with white cover
Type of protection IP20
Interfaces
Terminal blocks: 45° push terminals
Functions
Overload protection
Short-circuit protection
No-load protection
Burst protection voltage 1 kV
Surge protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Typical applications
For linear/area lighting in office applications
Driver LC 38W 400-700mA flexC lp SNC4
Linear drivers
Data sheet
Product description
Constant current LED driver for luminaire installation
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Selectable fixed output current 700, 600, 500 and 400 mA
Max. output power 37.8 W
Up to 86.5 % efficiency
Nominal lifetime up to 100,000 h
5 years guarantee (conditions at www.tridonic.com)
Obsolete , please order the successor below
Alternative
Driver LC 38W 700mA fixC lp SNC2
essence series SELV
Product description
Fixed output built-in LED driver
Constant current LED driver
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current 700 mA
Max. output power 37.8 W
Up to 86 % efficiency
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: metal, white
Type of protection IP20
Functions
Overload protection
Short-circuit protection
No-load protection
