18-35V 350mA 1-12W Constant current driver Dimmable with most trailing edge dimmers LENGTH 98 mm HEIGHT 22 mm WIDTH 39 mm

Read more less

PIR ceiling sensor. IP20 rated for indoor use only Recess fitting Cut out: 62mm 360° field of detection 6m range Adjustable Lux Adjustable time: 10 seconds to 8 minutes Can be wired in parallel Switching capacity: Max. 1200W Incandescent / Max. 300W LED Certified to EN 60669-2-1, EN 60669-1, EN 55015, EN 61547, EN 61000 Supplied in Knightsbridge box DOWNLOAD Datasheet Declaration of Conformity UKCA Declaration of Conformity CE Instruction Manual

Read more less

18-36V 700mA 25W Constant current driver Dimmable with most trailing edge dimmers CONSTRUCTION Polycarbonate FINISH White CLASS II IP RATING IP20 PRIMARY VOLTAGE 230V 50Hz LENGTH 120 mm HEIGHT 28 mm WIDTH 45 mm

Read more less

Philips iSOLde Cleo HPA 400 S professional tanning lamp with R7s caps. High quality, long lasting excellent performance. Philips code 919220245. Popular UV sunbed lamp for professional facial boosters in half and full body Philips solariums.  Voltage 240vWattage 400wLamp life 800 hoursLength 117mm

Read more less

The HPA 400/30 S tanning lamps are often used as the facial tanning lamp in a lot of equipment like in all Alisun home tanning sunbeds. Successor of the Philips HPA 400/30 S lamp.   Specifications Article nr. 350804 mpn 919159545 EAN 4050114003875 Brand iSOLde Length 10.4 cm Power 400 W Reflector No Lamp type Face, High pressure (HPA) Lifetime in hours Factory warranty: 800 hours

Read more less

230V IP65 3W LED Emergency Bulkhead Ideal for interior or exterior use, illuminating routes and exits - 3 hour Maintained and Non-Maintained - Hinged gear tray for simple installation - Push-fit connector block - Side and rear conduit entry - Complete with self-adhesive legend kit 115lm (AC/DC mode), 5500K

Read more less

Knightsbridge's latest innovation is the wattage and colour-adjustable LED gear trays. It reduces complexity by combining triple wattage and colour adjustments into a single gear tray. Secured to the casing* via four butterfly clips paired with the push-fit terminal block, ensures a speedy installation. The gear trays are compatible with the Tenax One and Tenax Quad range of casings. *Casing is not included and must be purchased separately. - 3000K/ 4000K/ 5700K adjustable - 10W/ 15W/ 20W adjustable - Push-fit terminals with loop-in-loop-out capabilities - Options available: standard, emergency, self-test emergency, microwave sensor, emergency with a microwave sensor, self-test emergency with a microwave sensor - 10W - 1,200lm at 4000K** - 15W - 1,670lm at 4000K** - 20W - 2,100lm at 4000K** **Performance for the gear tray inside the casing.

Read more less

Knightsbridge's latest innovation is the wattage and colour-adjustable LED gear trays. It reduces complexity by combining triple wattage and colour adjustments into a single gear tray. Secured to the casing* via four butterfly clips paired with the push-fit terminal block, ensures a speedy installation. The gear trays are compatible with the Tenax One and Tenax Quad range of casings. *Casing is not included and must be purchased separately. - 3-hour emergency with a Lithium (LiFePO4) battery - 3000K/ 4000K/ 5700K adjustable - 10W/ 15W/ 20W adjustable - Push-fit terminals with loop-in-loop-out capabilities - Options available: standard, emergency, self-test emergency, microwave sensor, emergency with a microwave sensor, self-test emergency with a microwave sensor - 10W - 1,200lm at 4000K** - 15W - 1,670lm at 4000K** - 20W - 2,100lm at 4000K** **Performance for the gear tray inside the casing.

Read more less

Knightsbridge's latest innovation is the wattage and colour-adjustable LED gear trays. It reduces complexity by combining triple wattage and colour adjustments into a single gear tray. Secured to the casing* via four butterfly clips paired with the push-fit terminal block, ensures a speedy installation. The gear trays are compatible with the Tenax One and Tenax Quad range of casings. *Casing is not included and must be purchased separately. - Adjustable microwave sensor: detection area, daylight levels and hold time - 3000K/ 4000K/ 5700K adjustable - 10W/ 15W/ 20W adjustable - Push-fit terminals with loop-in-loop-out capabilities - Options available: standard, emergency, self-test emergency, microwave sensor, emergency with a microwave sensor, self-test emergency with a microwave sensor - 10W - 1,200lm at 4000K** - 15W - 1,670lm at 4000K** - 20W - 2,100lm at 4000K** **Performance for the gear tray inside the casing.

Read more less

Knightsbridge's latest innovation is the wattage and colour-adjustable LED gear trays. It reduces complexity by combining triple wattage and colour adjustments into a single gear tray. Secured to the casing* via four butterfly clips paired with the push-fit terminal block, ensures a speedy installation. The gear trays are compatible with the Tenax One and Tenax Quad range of casings. *Casing is not included and must be purchased separately. - 3-hour emergency with a Lithium (LiFePO4) battery - Adjustable microwave sensor: detection area, daylight levels and hold time - 3000K/ 4000K/ 5700K adjustable - 10W/ 15W/ 20W adjustable - Push-fit terminals with loop-in-loop-out capabilities - Options available: standard, emergency, self-test emergency, microwave sensor, emergency with a microwave sensor, self-test emergency with a microwave sensor - 10W - 1,200lm at 4000K** - 15W - 1,670lm at 4000K** - 20W - 2,100lm at 4000K** **Performance for the gear tray inside the casing.

Read more less

Knightsbridge's latest innovation is the wattage and colour-adjustable LED gear trays. It reduces complexity by combining triple wattage and colour adjustments into a single gear tray. Secured to the casing* via four butterfly clips paired with the push-fit terminal block, ensures a speedy installation. The gear trays are compatible with the Tenax One and Tenax Quad range of casings. *Casing is not included and must be purchased separately. - 3-hour emergency with a Lithium (LiFePO4) battery - Self-test emergency for automatic function and duration tests - Adjustable microwave sensor: detection area, daylight levels and hold time - 3000K/ 4000K/ 5700K adjustable - 10W/ 15W/ 20W adjustable - Push-fit terminals with loop-in-loop-out capabilities - Options available: standard, emergency, self-test emergency, microwave sensor, emergency with a microwave sensor, self-test emergency with a microwave sensor - 10W - 1,200lm at 4000K** - 15W - 1,670lm at 4000K** - 20W - 2,100lm at 4000K** **Performance for the gear tray inside the casing.

Read more less

Knightsbridge's latest innovation is the wattage and colour-adjustable LED gear trays. It reduces complexity by combining triple wattage and colour adjustments into a single gear tray. Secured to the casing* via four butterfly clips paired with the push-fit terminal block, ensures a speedy installation. The gear trays are compatible with the Tenax One and Tenax Quad range of casings. *Casing is not included and must be purchased separately. - Integral natural daylight sensor for exterior use only - 3000K/ 4000K/ 5700K adjustable - 10W/ 15W/ 20W adjustable - Push-fit terminals with loop-in-loop-out capabilities - Options available: standard, emergency, self-test emergency, microwave sensor, emergency with a microwave sensor, self-test emergency with a microwave sensor

Read more less