30 W 1–10 V dimmable LED driver 350 mA / 500 mA / 700 mA multiple currents output Lifetime up to (h): 100000 Dimming range: 1% – 100% Product number: 5 504 004 More information: OUTCOAT, PanelReady Datasheet Voltage range (V): 198–264 DC range (V): 176–280 Max temperature at Tc point (°C): 75 Ambient temperature range: –20 °C .. +50 °C IP rating: IP20 Lifetime up to (h): 100000

Read more less

The Tridonic LC 75W 1800mA LED Driver is a fixed output, constant current LED driver with a maximum output power of 75w. These drivers have an average life of 100,000 hours and a 5 year guarantee. . Tridonic article number: 28000684

Read more less

Product description LED Constant current LED Driver for luminaire installation New version DC operating with EL marking For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Output current adjustable between 350 – 500 mA Max. output power 69 W Up to 91 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces Terminal blocks: 45° push terminals Functions Overload protection Short-circuit protection No-load protection Burst protection voltage 1 kV Surge protection voltage 1 kV (L to N) Surge protection voltage 2 kV (L/N to earth) Typical applications For linear/area lighting in office applications

Read more less

More Information Manufacturer Ecopac Power Output Wattage (W) 60 Output Voltage 12V Dimmable (Type) No Dimensions 116.3 x 51 x 31.7 mm ECD-65-C12-C14

Read more less

river LC 57W 800-1050mA flexC lp ADV advanced series SELV Product description LED Constant current LED driver for luminaire installation New version DC operating with EL marking For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Output current adjustable between 800 – 1,050 mA Max. output power 57 W Up to 86 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces Terminal blocks: 45° push terminals Functions Overload protection Short-circuit protection No-load protection Overtemperature protection Burst protection voltage 1 kV Surge protection voltage 1 kV (L to N) Surge protection voltage 2 kV (L/N to earth) Suitable for emergency escape lighting systems acc. to IEC 50172 Typical applications For linear/area lighting in office applications

Read more less

Driver LC 75W 100–400mA flexC lp EXC excite series non-SELV Product description Constant current LED Driver for luminaire installation For luminaires of protection class I and protection class II Adjustable output current between 100 and 400 mA via ready2mains Programmer or I-SELECT 2 plugs Max. output power 75 W Up to 94 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces ready2mains (configuration via mains) Terminal blocks: 0° push terminals Functions Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2) Protective features (overtemperature, short-circuit, overload, no-load, input voltage range) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Application-oriented operating window for maximum compatibility Best energy savings due to high efficiency Flexible configuration via ready2mains and I-SELECT 2 Reliability proven by lifetime up to 100,000 h and 5 years guarantee Typical applications For linear/area lighting in office applications

Read more less

EM powerLED SELFTEST 1 – 2 W Combined emergency lighting LED driver 1 – 4 W Screw-fix Clip-fix Screw-fix Clip-fix Product description Emergency lighting LED driver with selftest function For self-contained emergency lighting SELV for output voltage < 60 V DC Low profile casing (21 x 30 mm) 5 years guarantee Properties Mains and emergency operation Self-test as per IEC 62034 Constant current mode With either screw or clip fastening (clip-fix) 1, 2 or 3 h rated duration Selectable operating time (jumper) Output power limitation Two-colour status display LED “Rest mode” function Simple set-up Automatic restart after LED replacement Electronic multi-level charge system SELV classified (outputs powerLED, battery, status LED, test switch) Polarity reversal protection for battery Deep discharge protection Very low energy consumption from the battery after activation of the deep discharge protection Short-circuit-proof battery connection Emergency lighting LEDs available Self-test: Status of the battery Status of the LED Charge condition Function test Duration test Batteries High-temperature cells 2 Ah NiMH batteries Cs cells 4 year design life 1 year guarantee For battery compatibility refer to data sheet Picture for illustrative purposes only 

Read more less

LC1x30-E-DA   30 W DALI dimmable LED driver 350 mA / 500 mA / 700 mA multiple currents output Lifetime up to (h): 100000 Dimming range: 1% – 100% Product number: 5 502 004 More information: DALI, PanelReady Datasheet

Read more less

ELED-40P-C300/1400T Series Features: Features: • Constant Current mode output with multiple levels selectable by dip switch• Dimming function: Triac/phase cut dimming• Work with leading or trailing edge Triac dimmer• (ON key: leading edge; 1 key: trailing edge)• AC input: 200-240VAC• Built-in active PFC function• Efficiency up to 80%• IP20 design for indoor installation• Full protection plastic housing easy installation• Protections: Short circuit/ Over load• Cooling by free air convection• Suitable for LED lighting and moving sign applications• Strong compatibility, flicker-free dimming https://www.ecopacpower.co.uk/assets/pdf/ELED-40P-C300-1400T.pdf  

Read more less

EM powerLED PRO DIM SR 45 W Combined emergency lighting LED driver Note: LED driver supplied with duration dip switch (2-way) in 3 hours position. Duration dip switch and I-SELECT 2 PLUG must be set before battery and mains connection. Product description Independent dimmable LED driver Emergency lighting LED driver with DALI interface and automatic test function For self-contained emergency lighting For LED modules with a forward voltage of 20 – 50 V SELV for output voltage < 60 V DC Compact plastic casing with strain relief Properties Output power 6 – 45 W Constant current LED operation 300 – 1,400 mA output current in mains operation, adjustable with I-SELECT 2 PLUG in steps of 25 mA or via DALI in steps of 1 mA Integrated emergency lighting unit 1, 2 or 3 h rated duration Operating time selectable with dip switch (2-way) Automatic shutdown of output if the forward voltage of the LED is out of range Two-colour status display LED Electronic multi-level charge system Pulse current charging for NiMH batteries Polarity reversal protection for battery Power-up fading at AC Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Deep discharge protection Short-circuit-proof battery connection 5 years guarantee Interfaces one4all (DALI DT 1 & 6, DSI, switchDIM, corridorFUNCTION) Terminal blocks: 45° push terminals Batteries High-temperature cells NiCd or NiMH batteries D, Cs, LA or LAL cells Battery box for independent use 4 year design life 1 year guarantee For battery compatibility refer to data sheet

Read more less

EUP12T-1HMC Series Features: Single channel output, output current level selectable by DIP switch Support Leading edge (TRIAC) and Trailing edge (ELV) dimmerDimming range from 40VAC to 240VACBuilt-in active PFC functionClass 2 power supply. Full protective plastic housingDimming effect smooth, no flickerProtections: Short circuit, over load, over temperatureSuitable for indoor LED lighting application, such as down light, spot light, and so on Wattage 12 Input Voltage 220-240VAC Output Current 200,250,300,350mA Output Voltage 9-40VDC Output Voltage Options Single Dimensions 150 x 43 x 29 Working Temperature -20 - +50°C Safety Standards CE  

Read more less

Hytroniks HED2050 50W DALI/1-10V/Switch-Dim LED Driver

Read more less