ELED-40-C300/1400DP2 Features: 40W DALI 2 and Push Dimming Multiple-Stage Output Current LED Driver Features: • Constant Current mode output with multiple levels selectable by dip switch• DALI 2 dimming function (IEC62386)• AC input: 100-277VAC• Built-in active PFC function• Efficiency up to 86%• Protections: Short circuit/ Over load/Over temperature• Cooling by free air convection• Suitable for intelligent LED lighting ELED-C40-300/1400DP2(1400) ELED-C40-300/1400DP2(1300) ELED-C40-300/1400DP2(1200) ELED-C40-300/1400DP2(1100) ELED-C40-300/1400DP2(1000) ELED-C40-300/1400DP2(900) ELED-C40-300/1400DP2(800) ELED-C40-300/1400DP2(700) ELED-C40-300/1400DP2(650) ELED-C40-300/1400DP2(600) ELED-C40-300/1400DP2(550) ELED-C40-300/1400DP2(500) ELED-C40-300/1400DP2(450) ELED-C40-300/1400DP2(400) ELED-C40-300/1400DP2(350) ELED-C40-300/1400DP2(300) Wattage 40 40 40 40 40 40 40 40 40 39 35.8 32.5 29.3 26 22.8 19.5 Input Voltage 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 100~277VAC 300mA Output Current 1400mA 1300mA 1200mA 1100Ma 1000mA 900mA 800mA 700mA 650mA 600mA 550mA 500mA 450mA 400mA 350mA 3~65 Output Voltage 3~29 3~31 3~34 3~37 3~40 3~45 3~50 3~57 3~62 3~65 3~65 3~65 3~65 3~65 3~65 Dimensions 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm 171.5 x 54x 20 mm Working Temperature -40~80°C Safety Standards EN61347-1, EN61347-2-13, UL8750 EMC Standards Compliance to EN55015, EN61000-3-2,3 (≥50% load), FCC Part 15B

Read more less

Driver LC 25W 350–1050mA flexC SC EXC excite series With strain-relief Product description Constant current LED driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Adjustable output current between 350 and 1,050 mA via ready2mains Programmer or I-SELECT 2 plugs Max. output power 25 W Up to 86 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Interfaces ready2mains (configuration via mains) Terminal blocks: 45° push terminals Functions Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2) Protective features (overtemperature, short-circuit, overload, no-load, input voltage range) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Application-oriented operating window for maximum compatibility Best energy savings due to high efficiency Flexible configuration via ready2mains and I-SELECT 2 Typical applications For downlight, spotlight and decorative applications   Data sheet  

Read more less

Obsolete, please order the below  Alternative    https://www.easy-controlgear.com/products/ecxd1050-299-sr-186763-vossloh-schwabe?_pos=1&_sid=e471d17bd&_ss=r Specifications Technical data Information Brand Harvard Power Systems Commodity 8504409090 Item number CL350D2-240-C Warranty pack 60 Months Bring-In Series CL RoHS Compliant Description AC-DC 33W LED driver Constant Current mode (CC); Max. output 48Vdc at 0.35A; IP20; Dimming with DALI; Remote control Packing Quantity 40 Application LED EN 61347 Net weight (gram) 130 Technology AC/DC Constant Current C.C. Format Box Type - Enclosed Output Power (W) 33 Output Voltage (V) 48 Output Current (A) 0.35 Input Voltage (V) 220 - 240 IP Rating IP20 Width (mm) 32 Height (mm) 32 Depth (mm) 180 Control Signals Remote Sense Dimming Technology DALI

Read more less

LED Driver 240v 33w 500/1000ma - Harvard - CL1000S-240-C

Read more less

OMNI-LED FLEXITM ARTICULATED LED REMOTE BOX EMERGENCY CONVERSION SOLUTIONS Product Overview Effective solution for emergency conversion of luminaires Articulated design allows installation through a ceiling cut-out of just 55mm diameter Removable end covers provide easy wiring access Ideal for use with LED panels or downlights Available with pre-wired cable assemblies for ‘plug-and-play’ convenience Available with DALI Self-Test functionality 3 hour operation using high temperature Nickel Cadmium or Nickel Metal Hydride cells Designed and manufactured in Great Britain Technical Data Input Supply Voltage 230V +/- 10% Supply Frequency 50/60 Hz Output Voltage Range 9 – 200 VDC Battery Type 2.4V NiCd, 3.6V NiCd or 4.8V NiMH Ambient Temperature Range 5°C – 35°C Battery Charge Time 24 Hours Earth Leakage Current <0.5mA IP Rating IP20

Read more less

Perfect alternative to the Harvard CL350S and CL700S    Mackwell LED Drivers utilise quasi-resonant technology, which ensures higher efficiency levels are maintained across a wider voltage range. The switchable models provide the added flexibility to switch between different currents during the installation stage.All drivers are UK designed and manufactured, incorporating premium grade components as standard. The use of these components ensures all drivers maintain a high power factor and low operating temperatures. All our LED Drivers are designed to achieve a minimum operating lifetime of 50,000 hours. All drivers are housed in a robust white plastic case and include 1-7mm cable clamping as standard. KEY FEATURES• Switchable between 350 mA and 500 mA• Up to 88% operating efficiency• 0.95 power factor• 1-7mm secure cable clamping• Double insulation (Class II)• Short circuit protection• Open circuit protection• Over temperature protection• Mains surge protection• Automatic thermal cut-out• UK designed and manufactured Technical DataSPECIFICATION OUTPUTWATTAGE:33 wattsCURRENT: 350mA or 700mAVOLTAGE RANGE: 9 to 48 Volts INPUTEFFICIENCY: 88% at full loadPOWER FACTOR: 0.96 at full loadVOLTAGE: 198 to 265 VacFREQUENCY: 50/60 Hz PROTECTIONS-Mains surge-Over load-Open circuit-Short circuit-Thermal cut-out DIMENSIONS186 mm x 31.7 mm x 32.5 mm WEIGHT120g ENVIRONMENTAL CONDITIONS OPERATING TEMPERATURE: -20°C to +50°CSTORAGE TEMPERATURE-30°C to +70°CRELATIVE HUMIDITY: 95% non-condensingLIFE TIME: 50,000 hours (minimum)IP RATING: 40 ELECTRICAL TESTING STANDARDS EN61347-2-13EN60950EN61547EN62384:2006EN60068-2-1,2,30,78EN55015:2006 + A2:2009EN61000-3-2APPLICATION NOTES -Ensure the mains has been disconnected from the driver for at least 1 minute before connecting to the LEDs.-Do not connect Live and Neutral to the LED output terminals.-Ensure LED QTY usage is within the recommended guidelines of the driver. Mackwell maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended forguidance only. SKU: MLD-SCC-33-350/700

Read more less

IP65 design for indoor or outdoor installationsBuilt-in active PFC, PF>0.9 for 60% of load or higher5 years warrantyProtections: Short circuit / Over current / Over voltage / Over temperatureOther features:Universal AC input (up to 305VAC) / Full rangeHigh efficiency up to 95%Output current adjustable through output cable or internal potentiometerCooling by free air convectionSuitable for LED lighting and street lighting applicationsMeet 4KV surge immunity level (IEC61000-4-5)Optional CQC models availableOutput voltage and C.C level can be adjusted through internal potentiometerMore Information Manufacturer Mean Well Output Wattage (W) 185 Output Voltage 36V Dimmable (Type) 1-10VDC, PWM signal, resistance DC Output Adjustment 33 ~ 40V Dimensions 228*68*38.8mm EMC Standards EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 Input Voltage 90~305VAC, 127~431VDC Safety Standards UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13, UL1012, UL60950-1 Output Voltage Options Single Working Temperature -40~+70°C (refer to output derating curve) PDF Datasheet HLG-185H-spec_1.pdf

Read more less

PLEASE NOTE THIS PRODUCT IS NOW OBSOLETE , PLEASE CONSIDER THE BELOW AS A VIABLE ALTERNATIVE DATASHEET IN DOWNLOADS  ALTERNATIVE Ansell/All Led / Ohmtronic  Ansell constant voltage, non dimmable 75w LED Driver for 12v LED applications Offers thermal, short circuit and overload protection

Read more less

This item is obsolete, you will be sent  Alternative TCI 151376 Harvard CoolLED 33w 700ma 15-48v Open Terminals - Harvard - CL700D2-240-B C-DC 33W LED driver Constant Current mode (CC); Max. output 48Vdc at 0.7A; IP20; Dimming with DALI; Built-In control Specifications Technical data Information Brand Harvard Power Systems Commodity 8504409090 Item number CL700D2-240-B Warranty pack 60 Months Bring-In Series CL RoHS Compliant Description AC-DC 33W LED driver Constant Current mode (CC); Max. output 48Vdc at 0.7A; IP20; Dimming with DALI; Built-In control Packing Quantity 50 Application LED EN 61347 Net weight (gram) 130 Technology AC/DC Constant Current C.C. Format Box Type - Enclosed Output Power (W) 33 Output Voltage (V) 48 Output Current (A) 0.7 Input Voltage (V) 220 - 240 IP Rating IP20 Width (mm) 32 Height (mm) 32 Depth (mm) 150 Dimming Technology DALI

Read more less

Driver LCO 165W 200–1050mA 285V one4all NFC C EXC3 excite NFC outdoor series Product description Dimmable built-in constant current LED driver Dimming range 5 – 100 % (min. 10 mA) For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Output current adjustable between 200 – 1,050 mA via NFC, DALI or ready2mains Programmer Max. output power 165 W Up to 93 % efficiency Lowest power input on stand-by < 0.16 W Nominal lifetime of 100,000 h and 8 years guarantee Interfaces Near field communication (NFC) one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration via mains) U6Me2 (configuration of chronoSTEP 2 via mains) Terminal blocks: 45° / 0° push terminals Functions Adjustable output current in 1-mA-steps (NFC, DALI, ready2mains) Programmable chronoSTEP: times and levels (NFC, DALI, U6Me2, ready2mains) Dimming through mains voltage (inputDIM) Enhanced constant light output function (eCLO) Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Configurable external temperature management (ETM) Intelligent Temperature Guard (ITG) Intelligent Voltage Guard Plus (IVG+) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Flexible configuration via companionSUITE (NFC, DALI, ready2mains™) or U6Me2 programmer Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency In-field programming possible after installation with NFC interface and ready2mains High overvoltage protection: up to 10 kV asymmetric (protection class I and II) Typical applications Road, street and industry

Read more less

Product Datasheet   Product family features _ Line frequency: 0 Hz | 50 Hz | 60 Hz _ Versatile DALI window driver up to 75 W due to flexible output characteristic _ Supply voltage: 220…240 V _ Usable as DT6 (2-channel) or DT8 (Tunable White) driver* _ Available with output current range: up to 700 mA _ Constant Lumen Output (CLO) _ Integrated customizable thermal management (Driver Guard) _ Non-isolated drivers

Read more less

OBSOLETE, THE BELOW WILL BE SENT Or  Alternative alternative    Eaglerise EIP009CLSD1L Series constant current, triac dimmable LED driver. Output current 200mA 9W Features Short circuit, over load, over voltage & over temperature protection IP20 rated Power Factor ?0.9 Efficiency ?78% Class II, SELV Leading edge & trailing edge dimmable 5 Year WarrantyMore Information Manufacturer Eaglerise Output Wattage (W) 9 Output Current 200mA Dimmable (Type) Triac Leading edge & Trailing edge DC Output Adjustment No Dimensions 105 x 42 x 24 mm EMC Standards EN55015; EN61000-3-2 Class C; EN61000-3-3, EN 61547;EN 61000-4-2, Performance Criteria B; EN 61000-4-5, 1000V Performance Criteria C Input Voltage 220-240VAC Safety Standards EN 61347-1; EN61347-2-13 Output Voltage Options Single Working Temperature -10 ~ +50C PDF Datasheet EIP009CxxxxLSD1L.pdf

Read more less