Dimmable constant current LED driver (SELV) Independent LED driver with cable clamps Dimmable via leading edge and trailing edge phase dimmers Dimming range 5 to 100 % (depending on dimmer) For luminaires of protection class I and protection class II For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711 Temperature protection as per EN 61347-2-13 C5e Selectable output current between 180, 250 and 350 mA Max. output power 15 W Up to 81 % efficiency Nominal lifetime up to 50,000 h

Read more less

LINEARdrive 180D is a constant voltage LED driver. It features four LED outputs that can be controlled individually via DMX. You can configure the driver over its intuitive, 3-button user interface with display: it lets you configure the number of channels, DMX settings for networked mode and show, colour and dim values for standalone operation. The driver features wire restraints which make it perfectly suited for independent installations. Features HydraDrive: provides the smoothest colour fades and dimming to dark User interface for driver configuration Benefits Dynamic response can be tuned to fit any content - from exceptionally smooth fades in architecture to fast-paced video in entertainment Configurable on-the-fly Input Characteristics Nominal input voltage DC: 12 - 28V Maximum input current: 6A, irrespective of PSU voltage Output Characteristics LED output load: RGBW @ 12V: 1.5A RGB @ 12V: 2A RGBW @ 24V: 1.5A RGB @ 24V: 2A Maximum LED output power: 180W Number of LED outputs: 4 (UL Class 2) LED output voltage: 12 - 24V Downloads Datasheet LIN180D3Specification submittal sheetWiring diagramQuick Start Guide

Read more less

Firstlite fldr100w Constant Voltage 100w 12v IP68 LED driver

Read more less

Tridonic LCA 100W 250-700mA one4all lp PRE 28000661 Dimmable built-in constant current LED driver Dimming range 1 to 100 % For luminaires of protection class I and protection class II Output current adjustable between 250 – 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI Max. output power 100 W Up to 93 % efficiency Power input on stand-by < 0.15 W Nominal lifetime up to 100,000 h

Read more less

Tridonic LCA 35W 24V one4all SC PRE 28001662 Dimmable 24 V constant voltage LED driver for flexible constant voltage strips Can be either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards) The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging One4all interface and ready2mains enable different dimming options Dimming range 1 to 100 % No additional external dimmer is needed Suitable for emergency escape lighting systems acc. to EN 50172 Nominal lifetime up to 50,000 h 5 years guarantee

Read more less

HED2040-A  is a constant current & voltage Dali LED driver. It also offer other dimming options like 1-10V dimming and Switch-Dim.  It has a built in DIP switch which allows easy multiple LED current and voltage selection options. Some of the product highlights are : Automatic output reduction 80%–60%–40% against overheat Failure DALI feedback Flicker-free dimming from 100%~30% In compliance with DALI 2 standard DALI and switch-Dim can be used at the same time

Read more less

One Lux LFP OL200/4W/M3/LFP/SS/E

Read more less

Tridonic 28000707 LC 45W 500-1400mA flexC SC EXC

Read more less

LINEARdrive 210D is a constant voltage LED driver. It features two LED outputs that are controlled via DALI. Both LED outputs are controlled over the same ballast, giving them the exact same behaviour. The driver features wire restraints which make it perfectly suited for independent installations. Features HydraDrive: provides the smoothest colour fades and dimming to dark Auxiliary power output Benefits Exceptionally smooth colour fades Input Characteristics   Nominal input voltage DC: 12 - 28V Maximum input current: 8A, irrespective of PSU voltage Output Characteristics   LED output load: 8A maximum, irrespective of whether using one or both LED outputs Maximum LED output power: 200W Number of LED outputs: 2 LED output voltage: 12 - 28V Auxiliary output voltage: equal to input voltage Auxiliary output current: 180mA @ 12V, 90mA @ 24V Maximum auxiliary output power: 2W

Read more less

NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Can be either used build-in or independent with clip-on strain-relief (see accessory) Dimming range 1 to 100 % (min. 5 mA) For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Adjustable output current between 300 – 700 mA via NFC or DALI Max. output power 28 W Up to 86 % efficiency Lowest power input on stand-by < 0.35 W Nominal lifetime up to 100,000 h

Read more less

Specifications General information Protection class IEC Safety class I Constant light output Programmable Nominal Lifetime (Nom) 50000 h Number of Products on MCB (16A Type B) (Max) 24 Number of Products on MCB (16A Type-C) (Max) 24 piece/unit Operating and electrical Input Frequency 50 to 60 Hz Mains voltage operation (DC) 168-275 V Total Harmonic Distortion IEC (Max) 20 % Output Current Ripple (Max) 4 % Maximum Efficiency at Full Load 93.1 % Power Factor 100% Load (Min) 0.9 Power Factor 100% Load (Nom) 0.9 Output Current (Max) 400 mA Output Current (Nom) 260 mA Output Current Tolerance (Max) 5 % Input Voltage (AC) 220-240 V Mains voltage performance (DC) 186-250 V Earth Leakage Current (Max) 0.4 mA Standby Power Consumption (Max) 0.47 W Power Factor (Min) 0.9 Open Circuit Voltage (DC) (Max) 275 V Protection Level Up (L-N) at 5 kA (Max) 1 kV Protection Level Up (LN-Earth) at 5 kA (Max) 2 kV Input Current (Nom) 370 mA Input current (AC) 0.37 mA Input current (DC) 0.45 Input Power (Nom) 75 W Inrush Current Peak (Max) 22 A Output Power (Max) 75 W Output Power (Nom) 48 W Output Voltage 100-215 V Default output current 120 mA Inrush Current Width to 50% of Peak 275 µs Power Factor 100% Load (Max) 0.9 Energy Metering Yes Constant Current (CC) True Constant Voltage (CV) False Diagnostics True Output Power (Min) 21 W Output Current (Min) 120 mA Output Voltage (Max) 215 V Output Voltage (Min) 100 V Wiring Connector Type Input Terminals Wago 744 Hot Wiring no Connector Type Output Terminals Wago 744 Output Wire Cross Section (Max) 1.5 mm² Output Wire Cross Section (Min) 0.5 mm² Cable Length From Device to Lamp 4 m Input Wire Gauge 16-20 Input wire strip length 8 mm to 9 mm Output wire strip length 8 mm to 9 mm Input Wire Cross Section (Max) 1.5 mm² Input Wire Cross Section (Min) 0.5 mm² System characteristics Central DC Operation Yes YellowDot ready No Temperature T-Ambient (Max) 50 °C T-Ambient (Min) -20 °C T-Storage (Max) 85 °C T-Storage (Min) -25 °C T-Case Lifetime (Max) 75 °C T-Case Lifetime (Nom) 75 °C T-Case Maximum (Max) 75 °C Module Temperature Protection yes Maximum case temperature (in case of failure) 110 °C Controls and dimming Dimmable DALI Control Interface Touch and DALI Dimming Dimming Range 100-1 % D4i compliant No DynaDimmer No Mechanical and housing Product Length 360 mm Housing Office 360x30x22 744 7 7p SideM Housing Dimensions 360 x 30 x 22 Overall length 360 mm Overall width 30 mm Overall height 22 mm Approval and application Surge Protection (Common/Differential) EN61547 (L-L 1kV, L-G 2kV) kV Relative Humidity (Operation) (Max) 90 % Relative Humidity (Operation) (Min) 10 % IP Classification IP20  [ Finger-protected] Isolation Classification No Short Circuit Protection Protected Over Power Protection Protected Open Circuit Protection Protected Approval Marks CCC certificate CE marking ENEC certificate RCM compliance REACH compliance RoHS compliance Corridor Mode True Output Current Set Options Programmable,Rset2 Product data Full product code 871829168402200 Order product name Xitanium 75W 0.12-0.4A 215V TD 230V EAN/UPC - Product 8718291684022 Order code 929000852103 Numerator - Quantity Per Pack 1 Numerator - Packs per outer box 12 Material Nr. (12NC) 929000852103 Net Weight (Piece) 0.250 kg

Read more less

Product description Independent constant current LED driver Dimmable via DALI-2 Dimming range 1 to 100 % (min. 5 mA) Output current adjustable between 450 – 1,050 mA with DALI or NFC Max. output power 45 W Up to 88 % efficiency Power input on stand-by < 0.5 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Strain relief with loop through function Interfaces Near field communication (NFC) one4all (DALI-2 DT 6, switchDIM, corridorFUNCTION V2) Functions Adjustable output current in 1-mA-steps (NFC, DALI-2) Constant light output function (CLO) Protective features (overtemperature, short-circuit, overload, no-load) Surge protection voltage 1 kV (L – N) Suitable for emergency escape lighting systems acc. to EN 50172 For cable cross-sections up to 2.5 mm² Benefits Flexible configuration via companionSUITE (NFC, DALI-2) Application-oriented operating window for maximum compatibility Typical applications For applications in downlight and decorative luminaires

Read more less