NLP Conversion Range https://www.liteplan.com/images/products/E-C-Kits-Packs-LED-Lamps/NLP/NLP-1-Datasheet-web.pdf   The NLP/1, is a high quality 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is available in 2 versions, one with PCB terminal blocks, for internal mounting inside a luminaire, or a pre-wired version for mounting remotely from the luminaire where integral mounting is not possible. The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The module is supplied with a green charge healthy indicator LED. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour.  Where space inside the luminaire is limited and the battery is deemed too tall, we are able to supply the NLP/1S. This is supplied with a slim LiFePO4 battery stick, ideal for smaller luminaires.  Order Codes Order Code Description     NLP/1-K Module, single cell battery and charge LED indicator for 6-55 Volt LED loads   Suitable for mounting inside the luminaire NLP/1/80-K Module, single cell battery and charge LED indicator for 6-79V LED loads   Suitable for mounting inside the luminaire     NLP/1S-K Module, three cell battery and charge LED indicator for 6-55 Volt LED loads   Suitable for mounting inside the luminaire NLP/1S/80-K Module, three cell battery and charge LED indicator for 6-79V LED loads   Suitable for mounting inside the luminaire 

Read more less

This has now been upgraded to the BMM/1-Kit LED S16 this is what you will be sent if you order this. The only difference is it operates as both maintained and non maintained.    The 3-hour emergency lighting driver operates the LED strip at 700mA which provides 240 lumen from the LED strip. This unit is designed for emergency lighting, not for continuous use.   This product is suitable for mounting to a gear-tray adjacent to an LED tube, mitigating the risk of LED tubes being miss-replaced and causing non-compatibility with existing emergency packs. BMM/1 Maintained/Non-Maintained Driver A 3-hour 700mA maintained/non-maintained emergency driver designed for constant current LED devices, supplied complete with the latest, extra long life lithium iron phosphate (LiFePO4) battery packs. The unit is designed to power a single LED in emergency mode, which can also be used for night lighting, where required. The Bmm/1/LEDS16 is supplied as a complete non-maintained/Maintained emergency driver/LED strip for integral mounting within a luminaire. The 3-hour emergency lighting driver operates the LED strip at 700mA which provides 240 lumen from the LED strip. This unit is designed for emergency lighting, not for continuous use.   This product is suitable for mounting to a gear-tray adjacent to an LED tube, mitigating the risk of LED tubes being miss-replaced and causing non-compatibility with existing emergency packs.   Operates With Extra Long Life LiFePO4 Batteries Suitable for Mounting To Gear-tray Deep Discharge Protection 1W Load Emmitting 240 Lumen For Non-Maintained Operation Technical Details:   Mains Supply 230-240V AC 50/60 Hz Max Ta and Tc Ta - 50 °C - Tc - 70 °C Power Rating - Operating 4.9W 51mA λ = 0.41 Overall Weight 0.4Kg - Charging 2.0W 25mA λ = 0.35 Battery Discharge Current 660mA nominal - Charged 0.45W 7.5mA λ = 0.24 Recharge Period 24-Hours Duration 3-Hours Discharge Voltage Cut Off 2.5 Volts Battery Size & Type 3.2V 4.5Ah LiFePO4 Ingress Protection IP20 Charge Current Dual Rate 0-300mA Mains Input Terminal 1.0mm² - 1.5 mm² Max Battery Temperature                   55 °C Battery Dimensions (LxWxH)               230mm x 24mm x 21mm Battery Fixing Centres             215-220mm Module Dimensions (LxWxH) Module Fixing Centres LED Strip Dimensions 165mm x 26.5mm x 21.5mm 155mm 304mm x 15mm  

Read more less