Products

Meanwell HLG-320H-C2800DA - Dali 319.2W 2800mA

Please note these can take up to 4 weeks to deliver General Specification Brand Mean Well Unit of Measure item Warranty Period 7 year Output Voltage 118 V Rated Current 2800 mA Power Rating 319.2 W Series HLG-C Series Operation Mode Constant Current Dimming Control DALI No. of Output 1 Waterproof IP67 Standards Met CB, CCC, CE, EAC, ENEC, UL Input 90V~305V Operating Temperature -40°C~85°C Dimensions Length:252mm | Width:90mm | Height:43.8mm |

Read more less

£171.04

Meanwell HLG-480H-BS - Mean Well HLG-480HB Series IP67 Rated LED Driver 478.8-480.6W 24-54V

A Type: Io and Vo adjustable through built-in potentiometerB Type: 3 in 1 dimming function (0~10VDC, 10V PWM signal and resistance)Metal housing with class I designProtections: Short circuit / Over voltage / Over Current / Over temperatureOther features:IP67 / IP65 design for indoor or outdoor installationsConstant Voltage mode output designFunction options : output adjustable via potentiometer; 3 in 1 dimming; Smart timer dimmingBuilt-in active PFC functionTypical lifetime >62000 hours7 years warrantyMore Information Manufacturer Mean Well Output Wattage (W) 480 Dimmable (Type) 1-10VDC, PWM signal, resistance Dimensions 262x 125x 43.8 (LxWxH) Mm EMC Standards Compliance to EN55015, EN61000-3-2 Class C (@ load >50%) ; EN61000-3-3, GB17743, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) Input Voltage 90-305VAC 127-431VDC Safety Standards UL8750 (type”HL”); CSA C22.2 No. 250 13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.14, GB19510.1; IP65 or IP67 approved Output Voltage Options Single Working Temperature -40~+85°C PDF Datasheet HLG-480H-SPEC.PDF

Read more less

£215.14

Meanwell HLG-60H-BS - Mean Well HLG-60HB Series IP67 Rated LED Driver 60W 15V – 54V

IP67 design for indoor or outdoor installationsBuilt-in active PFC, PF>0.9 for 60% of load or higher5 years warrantyProtections: Short circuit / Over current / Over voltage / Over temperatureOther features:Universal AC input (up to 305VAC) / Full rangeHigh efficiency up to 90.5%Output current adjustable through output cable or internal potentiometerCooling by free air convectionSuitable for dry, damp and wet locationSuitable for LED lighting and street lighting applicationsMeet 4KV surge immunity level (IEC61000-4-5)Class 2 power unitIP67 rated and built-in 3 in 1 dimming function (1~10VDC, PWM signal, or resistance)More Information Manufacturer Mean Well Output Wattage (W) 60 Dimmable (Type) 1-10VDC, PWM signal, resistance EMC Standards EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024 Input Voltage 90~305VAC, 127~431VDC Safety Standards UL8750, TUV EN61347-1, EN61347-2-13 approved; Design refer to UL60950-1, EN60950-1, EN60335-1 Output Voltage Options Single Working Temperature -40~+70°C PDF Datasheet HLG-60H-spec.pdf

Read more less

£46.73

Meanwell HLN-60H-24A - Mean Well LED Driver HLN-60H-24A 60W 24V

Output and C.C level can be adjusted through internal potentiometerBuilt-in constant current limiting circuit (C.V. + C.C mode) Protections: Short circuit/ Over current/ Over voltage/ Over temperature Other features:Universal AC input (up to 305VAC) / Full rangeFully isolated plastic case with IP64 levelClass 2 power unitHigh efficiency up to 91%Cooling by free air convectionSuitable for dry, damp locationsSuitable for LED lighting and moving sign applicationsBuilt-in active PFC function, PF> 0.9 for 60% load or higher3 years warranty More Information Manufacturer Mean Well Output Wattage (W) 60 Output Voltage 24V Dimmable (Type) 1-10VDC, PWM signal, resistance DC Output Adjustment +/-10% rated output voltage EMC Standards EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024 Input Voltage 90~305VAC; 127~431VDC Safety Standards UL8750, TUV EN61347-1, EN61347-2-13 approved; Design refer to UL/EN60950-1, EN60335-1, UL8750, TUV EN61347-1, ENG1347-2-13, PSE J61347-1 Output Voltage Options Single Working Temperature -40~+50°C (refer to output derating curve) PDF Datasheet HLN-60H-spec_12.pdf

Read more less

£69.85

LITEPLAN HLP/1S/LED/S16 T5 / T8 Led Emergency Solution BMM/1/KIT/leds16

This has now been upgraded to the BMM/1-Kit LED S16 this is what you will be sent if you order this. The only difference is it operates as both maintained and non maintained. The 3-hour emergency lighting driver operates the LED strip at 700mA which provides 240 lumen from the LED strip. This unit is designed for emergency lighting, not for continuous use. This product is suitable for mounting to a gear-tray adjacent to an LED tube, mitigating the risk of LED tubes being miss-replaced and causing non-compatibility with existing emergency packs. BMM/1 Maintained/Non-Maintained Driver A 3-hour 700mA maintained/non-maintained emergency driver designed for constant current LED devices, supplied complete with the latest, extra long life lithium iron phosphate (LiFePO4) battery packs. The unit is designed to power a single LED in emergency mode, which can also be used for night lighting, where required. The Bmm/1/LEDS16 is supplied as a complete non-maintained/Maintained emergency driver/LED strip for integral mounting within a luminaire. The 3-hour emergency lighting driver operates the LED strip at 700mA which provides 240 lumen from the LED strip. This unit is designed for emergency lighting, not for continuous use. This product is suitable for mounting to a gear-tray adjacent to an LED tube, mitigating the risk of LED tubes being miss-replaced and causing non-compatibility with existing emergency packs. Operates With Extra Long Life LiFePO4 Batteries Suitable for Mounting To Gear-tray Deep Discharge Protection 1W Load Emmitting 240 Lumen For Non-Maintained Operation Technical Details: Mains Supply 230-240V AC 50/60 Hz Max Ta and Tc Ta - 50 °C - Tc - 70 °C Power Rating - Operating 4.9W 51mA λ = 0.41 Overall Weight 0.4Kg - Charging 2.0W 25mA λ = 0.35 Battery Discharge Current 660mA nominal - Charged 0.45W 7.5mA λ = 0.24 Recharge Period 24-Hours Duration 3-Hours Discharge Voltage Cut Off 2.5 Volts Battery Size & Type 3.2V 4.5Ah LiFePO4 Ingress Protection IP20 Charge Current Dual Rate 0-300mA Mains Input Terminal 1.0mm² - 1.5 mm² Max Battery Temperature 55 °C Battery Dimensions (LxWxH) 230mm x 24mm x 21mm Battery Fixing Centres 215-220mm Module Dimensions (LxWxH) Module Fixing Centres LED Strip Dimensions 165mm x 26.5mm x 21.5mm 155mm 304mm x 15mm

Read more less

£74.74

HOLT8-1 T8 Tombstone Lampholder

2 required per fitting Screw Fix

Read more less

£1.77

LEDVANCE/OSRAM HQI-TS 1000 W/D/S PRO 4008321525475 Osram Ledvance

• High efficiency • Good to excellent color rendering • Excellent color stability • Small loss of luminous flux over the life of the lamp • Hot restrike capable • Compact dimensions for small spotlights • Good positioning thanks to K12s base • Sports stadiums and floodlight systems • Sports halls and multi-purpose halls • Airports • Solar simulation, material testing • Approved only for use in enclosed luminaires • Outdoor applications only in suitable luminaires

Read more less

£203.25

LEDVANCE/OSRAM HQI-TS 400 W/D FC2 Osram

_ High efficiency Uniform distribution of light Good to excellent color rendering Long lifetime Hot restrike capable UV values significantly below the maximum permitted thresholds to IEC 61167 thanks to UV filter Product datasheet HQI-TS 400 W/D POWERSTAR HQI-TS | Metal halide lamps with quartz technology for enclosed luminaires _ Foyers, reception areas Factory and hall lighting with lowcost installations Exhibition halls and trade fairs Sports halls and multi-purpose halls Pedestrian zones, public squares Parks and gardens Buildings, monuments, bridges Approved only for use in enclosed luminaires Outdoor applications only in suitable luminaires __ May 4, 2021, 19:06:27 © 2021, OSRAM GmbH. All rights reserved. HQI-TS 400 W/D Page 1 of 6 Technical data Electrical data Nominal wattage 400.00 W Rated wattage 400.00 W Lamp current 4.0 A PFC capacitor at 50 Hz 45 µF 1) Nominal voltage 118 V Ignition voltage 4.0 kVp;25 kVp 2) Nominal current 4 A 1) At rated voltage and cos ϕ ≥ 0.9 2) Minimum;Maximum Photometrical data Rated lamp efficacy (standard condition) 83 lm/W Rated luminous flux 35000 lm Color rendering index Ra 93 Color temperature 5500 K Light color 955 Rated LLMF at 2,000 h 0.70 Rated LLMF at 4,000 h 0.60 Rated LLMF at 6,000 h 0.55 Rated LLMF at 8,000 h 0.52 Rated LLMF at 12,000 h 0.50 UV protection Yes Nominal luminous flux 35000 lm Rated color temperature 5500 K Light color (designation) Daylight Luminous flux 35000 lm Product datasheet __ May 4, 2021, 19:06:27 © 2021, OSRAM GmbH. All rights reserved. HQI-TS 400 W/D Page 2 of 6 Dimensions & weight Diameter 33.0 mm Length 206.0 mm Light center length (LCL) 103.0 mm Product weight 88.00 g Outer bulb T31 Overall length 206.0 mm Temperatures & operating conditions Maximum permitted outer bulb temperature 750 °C Maximum permitted pinch temperature 300 °C Lifespan Rated lamp survival factor at 2,000 h 0.80 Rated lamp survival factor at 4,000 h 0.70 Rated lamp survival factor at 6,000 h 0.60 Rated lamp survival factor at 8,000 h 0.55 Rated lamp survival factor at 12,000 h 0.50 Lifespan B50 12000 h Additional product data Base (standard designation) Fc2 Product remark With NAV control gear Design / version clear Mercury content 40.0 mg Appropriate disposal acc. to WEEE Yes Mercury-free No Product datasheet __ May 4, 2021, 19:06:27 © 2021, OSRAM GmbH. All rights reserved. HQI-TS 400 W/D Page 3 of 6 Capabilities Dimmable No Burning position p45 Enclosed luminaire required Yes Hot restart Yes Certificates & standards Energy efficiency class A Energy consumption 462 kWh/1000h Country specific categorizations ILCOS MD/UB-400/856-H/E/SL-Fc2-25/162/H Order reference HQI-TS 400W/D P Light Distribution HQI_T_D_PRO Product datasheet __ May 4, 2021, 19:06:27 © 2021, OSRAM GmbH. All rights reserved. HQI-TS 400 W/D Page 4 of 6 OPERATION OF HIGH INTENSITY DISCHARGE LAMPS WITH SEMI-PARALLEL IGNITION UNIT OPERATION OF HIGH INTENSITY DISCHARGE LAMPS WITH A SUPERIMPOSED IGNITION UNIT OPERATION OF HIGH INTENSITY DISCHARGE LAMPS WITH PULSE IGNITION UNIT Logistical Data Product code Product description Packaging unit (Pieces/Unit) Dimensions (length x width x height) Volume Gross weight 4008321689191 HQI-TS 400 W/D Shipping carton box 12 Pieces Sleeves 216 mm x 166 mm x 272 mm 9.75 dm³ 1464.00 g The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Disclaimer Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release. Product datasheet __ May 4, 2021, 19:06:27 © 2021, OSRAM GmbH. All rights reserved. HQI-TS 400 W/D Page 5 of 6 Product datasheet __ May 4, 2021, 19:06:27 © 2021, OSRAM GmbH. All rights reserved. HQI-TS 400 W/D Page 6 of 6

Read more less

£51.24