Model: EL1x36NGN
A Helvar High Frequency Ballast
Product Features
Input voltage: 220 V – 240 V
Lamp type: T8 (36 W)
Lifetime (h): 60,000
Warm start
Energy efficiency class: A2
The Tridonic PCA 1x58 T8 ECO lp xitec II is a dimmable high-frequency ballast to run: 1 x 58 Watt 2ft fluorescent tube.
Tridonic article number: 28000037
Processor-controlled ballast with xitec II inside
Highest possible energy class CELMA EEI = A1 BAT
Noise-free precise control via DALI or DSI signal, switchDIM or corridorFUNCTION
Nominal lifetime up to 100,000 h (at ta 50 °C with a failure rate ? 0.2 % per 1,000 h)
Multilamp management
OEM-specific reserved memory areas
5-year guarantee
The Osram QTi 4x18/220-240 DIM is a 1-10v intelligent dimmable ballast to run 4 x 18w T8 Tubes. These ballasts have an average life of 100,000 hours, offer flicker free light, have an automatic safety shutdown at lamp failure, automatic restart after lamp replacement and are suitable for emergency lighting.
basicDIM Wireless constant voltage LED ECG The 24V constant voltage LED driver LC 100/24V bDW SC PRE2 from the Premium series from Tridonic is suitable for luminaire installation or independent assembly. It has a rated power of 100 watts. Ideal areas of application are cove lighting, facade accent lighting and indirect ceiling lighting. In addition, the LED ECG is suitable for safety lighting systems in accordance with EN 50172. The LED driver automatically builds up a wireless communication network with up to 127 nodes. basicDIM Wireless enables various dimming options in a range from 1-100%, so that no external dimmer is required. Configuration via the network is possible with the help of ready2mains. CASAMBI-capable: light control via app The basicDIM Wireless LED driver also has the entire CASAMBI functionality: you can integrate it into any CASAMBI Bluetooth network and then control it very conveniently via the app on your smartphone or tablet. The housing of the LED ECG has a small design (295 x 43 x 30 mm) and a small cross-section. There are 45° push-in terminals for easy wiring. The output terminals (+/–) are duplicated – for more flexibility in use. The nominal service life is up to 50,000 hours. Tridonic offers a 5-year guarantee. We have summarized all information about the Casambi light management system again. Here you can download the CASAMBI app for free: for iOS/Apple/iPhone/iPad for iOS/AppleWatch for Android
The most important features at a glance: - Energy efficiency class A2 BAT - Service life of up to 100,000 h - Intelligent Voltage Guard (overvoltage display and undervoltage shutdown) - Precise lamp operation by adjusting the lamp parameters - Advanced SMART heating for at least 50,000 starts without changing the lamp - Constant luminous flux regardless of mains voltage fluctuations - For lights of protection class I + II - Automatic restart after lamp replacement - Safety shutdown of defective lamps and at the end of lamp life - Insulation displacement terminals (IDC) for fast automatic and manual wiring - For emergency lighting systems in accordance with EN 50172
HF-Performer II for PL-T/C/R/L/TL5C lamps
HF-Performer II for PL-T/C/R/L/TL5C lamps HF-P 1 22-42 PL-T/C/L/TL5C EII 220-240V HF-Performer EII PL-T/C/R/T5c is a sustainable, slim and high-frequency electronic ballast for a wide range of CFL- ni applications.
It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2).
Lamp type PL-T/C/L/TL5C Number of lamps 1 piece/unit Automatic restart Yes Operating and Electrical Input Voltage 220 to 240 V Input frequency 50 to 60 Hz Operating frequency (max.) - kHz
View Datasheet
General Information
Application Code
III
Lamp Type
PL-T/C
Number of Lamps
2 piece/unit
Number of Products on MCB (16A Type B) (Nom)
28
Automatic Restart
Yes
Operating and Electrical
Input Voltage
220 to 240 V
Input Frequency
50 to 60 Hz
Operating Frequency (Max)
- kHz
Operating Frequency (Min)
42 kHz
Operating Frequency (Nom)
45 kHz
Ignition Method
Warm Start
Crestfactor (Max)
1.7
Power Factor 100% Load (Nom)
0.95
Ignition Time (Max)
0.40 s
Mains Voltage Performance (AC)
-8%-+6%
Mains Voltage Safety (AC)
-10%-+10%
Earth Leakage Current (Nom)
0.5 mA
Inrush Current Width
0.250 ms
Constant Wattage Deviation
-2%/+2%
Ballast Factor (Nom)
1
Power Losses (Nom)
0.68-2.21 W
Inrush Current Peak (Max)
18 A
Efficiency at full load [%]
87.97 %
The Osram QTi DALI 4x18/220-240 DIM is a digital dimmable ballast to run 4 x 18w T8 Tubes. These ballasts have an average life of 100,000 hours, offer flicker free light, have an automatic safety shutdown at lamp failure, automatic restart after lamp replacement and are suitable for emergency lighting.
The Osram QTi 1x28/54/220-240 DIM is a 1-10v intelligent dimmable ballast to run 1 x 28w or 54w T5 Tubes. These ballasts have an average life of 100,000 hours, offer flicker free light, have an automatic safety shutdown at lamp failure, automatic restart after lamp replacement and are suitable for emergency lighting.
Product benefits
Same luminous flux with direct and alternating current
Perfect lamp start for applications with motion sensors
Dimming of amalgam lamps without flickering or reduced lifespan
Very high efficiency thanks to cut-off technology
Automatic restart after lamp replacement
ECGs comply with MINERGIE standard due to very low standby consumption
Configurable emergency power characteristics
