Tridonic 28000707 LC 45W 500-1400mA flexC SC EXC

Read more less

The Luxna LXPAN30DND is a 30W LED driver designed for non-dimmable lighting applications, featuring an IP20 rating suitable for indoor environments. Engineered to provide stable and efficient power supply, it ensures consistent LED performance and longevity. Its compact design facilitates easy integration into various lighting fixtures, making it ideal for professional installations where reliable, maintenance-free operation is essential. This driver supports a wide range of LED loads, delivering optimal current regulation to enhance overall lighting quality.

Read more less

NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED driver Dimming range 1 to 100 % For luminaires of protection class I and protection class II Adjustable output current between 1,100 and 2,100 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI Max. output power 100 W Up to 92 % efficiency Power input on stand-by < 0.2 W Nominal lifetime up to 100,000 h

Read more less

Osram OTi DALI 35/220-240/400 D LT2 UF L Line frequency: 0 Hz | 50 Hz | 60 Hz Versatile DALI window driver up to 75 W due to flexible output characteristic Supply voltage: 220…240 V Available with output current range: up to 700 mA Direct Ultraflat sensor connection via LEDset (LS/PD LT2 LI UF Sensor) Use with Ultraflat DALI sensor (LS/PD DALI LI UF Sensor) Constant Lumen Output (CLO) Non-isolated drivers DALI-2 certified (Part -101,-102 and -207)

Read more less

Fully programmable via software (DALI Interface) Flexible current setting (LEDset2) Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions) High quality of light thanks to <1% output ripple current Very high efficiency Very low standby power consumption: < 0.15 W * Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Read more less

Tridonic 87500840 LC 35/350/104 fixC lp SNC2

Read more less

LINEARdrive 210D is a constant voltage LED driver. It features two LED outputs that are controlled via DALI. Both LED outputs are controlled over the same ballast, giving them the exact same behaviour. The driver features wire restraints which make it perfectly suited for independent installations. Features HydraDrive: provides the smoothest colour fades and dimming to dark Auxiliary power output Benefits Exceptionally smooth colour fades Input Characteristics   Nominal input voltage DC: 12 - 28V Maximum input current: 8A, irrespective of PSU voltage Output Characteristics   LED output load: 8A maximum, irrespective of whether using one or both LED outputs Maximum LED output power: 200W Number of LED outputs: 2 LED output voltage: 12 - 28V Auxiliary output voltage: equal to input voltage Auxiliary output current: 180mA @ 12V, 90mA @ 24V Maximum auxiliary output power: 2W

Read more less

NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Can be either used build-in or independent with clip-on strain-relief (see accessory) Dimming range 1 to 100 % (min. 5 mA) For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Adjustable output current between 300 – 700 mA via NFC or DALI Max. output power 28 W Up to 86 % efficiency Lowest power input on stand-by < 0.35 W Nominal lifetime up to 100,000 h

Read more less

The Ecopac Power ECP150-12VF-1 slimline constant voltage LED driver is ideal for concealment where space is restricted, such as hiding behind a strip. Short circuit, over temperature and over loading protection are all standard features.  Ecopac Power LED Drivers are supplied with a 3 year warranty.  Other features: Slim line LED Driver Universal AC input/ Full range 180-264VAC Input Frequency 50/60Hz 12V Constant voltage output 3 years warrantyMore Information Manufacturer Ecopac Power Output Wattage (W) 150 Output Voltage 24V Dimmable (Type) No DC Output Adjustment N/a EMC Standards EN55015, EN61000-3-2; EN61000-4-2,3,4,5,6 EN61547 Input Voltage 180-264VAC Safety Standards EN61347-1,EN61347-2-13 Working Temperature -20~+45°C

Read more less

This is a TCI 55w 1050mA MaxiJolly Dali dimmable constant current LED driver. The full features list is as follows: •Multipower driver supplied with dip-switch for the selectionof the output current.•IP20 independent driver, for indoor use(DC MAXI JOLLY HC/2 DALI).•Class I protection against electric shock for direct or indirectcontact (DC MAXI JOLLY HC/2 DALI).•Driver for built-in use (DC MAXI JOLLY HC DALI BI).•It can be used for lighting equipment in protection class I.•Active Power Factor Corrector.•Analogical input (NTC) for thermal sensor connection.•Auxiliary output 12 V max. 100 mA.•Current regulation ±5 % including temperature variations.•Input and output terminal blocks on the same side(wire cross-section up to 1,5 - 2,5 mm2/ AWG15 - AWG13).•Clamping screws on primary and secondary circuits for cableswith diameter: min. 3 mm - max. 8 mm (DC MAXI JOLLY HC/2DALI).•Protections:- against overheating and short circuits;- against mains voltage spikes;- against overloads.•Thermal protection = C.5.a. Operation mode: Operation Mode•Light regulation 0/0,5 - 100 % by means of PUSH function, 0/1...10 V interface(I=1 mA) or 100 Kohm potentiometer and DALI.•Features DALI dimming:- memory function for sets or light groups;- recall of stored functions;- compatible with standard DALI interfaces.•Light regulation 0/0,5 - 100 % by means of PUSH function (mains voltage):- a short push to turn on and off;- a longer push to increase or decrease light intensity;- regulation automatically stops at minimum and maximum values;- for another on, regulation or off command, release the push button and givethe desired command again.- dimming level memory at mains restore.•Possibility to use PUSH function to 4/5 drivers without sync cable.•Maximum length of the cable, from push button to last driver, must bemax. 15 m / 49 ft. In case of applications where the cable is longer than15 m / 49 ft, keep this separate from the 110 - 240 Volt mains cable.•ATTENTION: only use normally open push buttons with no incorporatedwarning light.•Specific dimming terminal connection with a 0/1...10 Vdc electronicpotentiometer (0/1…10 V local dimming, double insulation required forexternal connection).•Max. 10 synchronised drivers of which only one can be controlled(1 Master + 9 Slaves).•Synchronization cable is separately supplied.

Read more less

Power LED PCV1260 60W 12VDC 0-5A IP20 Rated Latch-Off Protection Constant Voltage LED Driver

Read more less

TCI MINIJOLLY 20W LED Driver Mains dimmable, Multi Current 250-900Ma Specification Control Dimming PHASE CUT / IGBT - TRIAC Nominal Input Voltage 220...240 Height 22 Diameter Input Current 250 mA Input Current 300 mA Input Current 350 mA Input Current 400 mA Input Current 450 mA Input Current 500 mA Input Current 550 mA Input Current 600 mA Input Current 650 mA Input Current 700 mA Input Current 750 mA Input Current 800 mA Input Current 850 mA Input Current 900 mA Output Voltage Minimum 15 Output Voltage Minimum 10 Output Voltage Minimum 5 Output Voltage Maximum 48 Output Voltage Maximum 44 Output Voltage Maximum 40 Output Voltage Maximum 36 Output Voltage Maximum 33 Output Voltage Maximum 31 Output Voltage Maximum 29 Output Voltage Maximum 27 Output Voltage Maximum 25 Output Voltage Maximum 23 Output Voltage Maximum 22 IP Rating IP 20 (Independent Use) Output Power Max 20 Output Power Min 11 Width 111 Depth 52 Used to be the  122402 

Read more less