Product description
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Dimmable built-in constant current LED driver
Output current adjustable between 100 – 400 mA
Dimming range 1 to 100 %
For luminaires of protection class I and protection class II
Max. output power 75 W
Up to 92 % efficiency
Power input on stand-by < 0.15 W
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Low profile metal casing with white cover
Type of protection IP20
Interfaces
one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 0° push terminals
Functions
Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2)
Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)
Constant light output function (CLO)
Power-up fading at AC
Configurable via ready2mains
Switch off the driver with fade2zero
Service monitor to log certain events
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Flexible configuration via companionSUITE
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
Flexible configuration via DALI, ready2mains and I-SELECT 2
Reliability proven by lifetime up to 100,000 h and 5 years guarantee
Typical applications
For linear/area lighting in office applications
replacement for the 28000134
Self-contained emergency lighting LED driver with DALI interface
Non maintained operation
For LED modules with a forward voltage of 10 – 54 V
SELV for output voltage < 60 V DC
For luminaire installation
Compatible with Tridonic's LLE FLEX modules (ADV, EXC)
EM = Emergency
Nominal lifetime up to 100,000 h
EM converterLED PRO NiCd/NiMH 250 V
PRO version
Note: Supply of control gear with duration link in 3 hours position. Remove duration link for duration of 1 h. Duration link must be set before battery and mains connection.
Product description
Self-contained emergency lighting LED driver with DALI interface
Non maintained operation
For LED modules with a forward voltage of 48 – 250 V
For luminaire installation
Nominal lifetime up to 100,000 h
5 years guarantee
Functions
1, 2 or 3 h rated duration selectable with duration link
Constant power output
Self-test:
Weekly function test
Yearly duration test
Driver compatibility
3-pole technology: 2-pole LED module changeover and delayed power switching for the LED driver
For further information see datasheet, LED driver compatibility
Battery management
Intelligent charge system
Deep discharge protection
Polarity reversal protection for battery
Batteries
NiCd or NiMH batteries
4 year design life
1 year guarantee
For battery compatibility refer to datasheet, battery selection
Driver LCA 50W 100–400mA one4all lp PRE
premium series non-SELV
Product description
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Dimmable built-in constant current LED Driver
Output current adjustable between 100 – 400 mA
Dimming range 1 to 100 %
For luminaires of protection class I and protection class II
Max. output power 50 W
Up to 92 % efficiency
Power input on stand-by < 0.15 W
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Low profile metal casing with white cover
Type of protection IP20
Interfaces
one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 0° push terminals
Functions
Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2)
Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)
Constant light output function (CLO)
Power-up fading at AC
Configurable via ready2mains
Switch off the Driver with fade2zero
Service monitor to log certain events
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Intelligent Voltage Guard (overvoltage and undervoltage monitoring)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Flexible configuration via companionSUITE
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
Flexible configuration via DALI, ready2mains and I-SELECT 2
Reliability proven by lifetime up to 100,000 h and 5 years guarantee
Typical applications
For linear/area lighting in office applications
Tridonic LC 75/1100-1400/54 flexC lp SNC4 28004144
Constant current LED driver for luminaire installation
3 pin DIP switch version valid from production date: 20.12.2024
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Selectable fixed output current 1,100, 1,150, 1,200, 1,250, 1,300, 1,350 and 1,400 mA (pre-selected current 1,400 mA)
Max. output power 75.6 W
Up to 89 % efficiency
Nominal lifetime up to 100,000 h
Product Details
Nickel-Metal Hydride Battery with high--temperature NiMH cells for use with emergency lighting units. It has 4-year design life and it is cadmium free. Constant high-temperature operation – depending on the emergency lighting unit used. Good charging properties at high temperature. High energy maintenance of the charged battery. Simple connection with blade terminal. With polycarbonate fixing caps and connecting cable. Suitable for emergency lighting equipment as per IEC 60598-2-22.
· 3 Cells
· Stick formation
· 2.2Ah capacity
· 1 year guarantee from delivery date
· 4 year design life
· 1.2V per cell
Product description
Self-contained emergency lighting LED driver with DALI interface
Non maintained operation
For LED modules with a forward voltage of 10 – 54 V
SELV for output voltage < 60 V DC
For luminaire installation
Compatible with Tridonic's LLE FLEX modules (ADV, EXC)
EM = Emergency
Nominal lifetime up to 100,000 h
5 years guarantee (conditions at www.tridonic.com)
Show more
Article information Data sheet
Picture is of the 2 cell version, a 3 cell will be supplied
Product description _ High-temperature NiCd cells for use with emergency lighting unit _ 4 year design life _ 1 year guarantee from delivery date Properties _ Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet) _ Good charging properties at high temperature _ High energy maintenance of the charged battery _ Certified quality manufacturer _ In various configurations _ Simple connection with blade terminal respectively plug terminal _ With polycarbonate fixing caps and connecting cable _ Electrical connection with mounted end caps possible _ Suitable for emergency lighting equipment as per IEC 60598-2-22
Product description
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Independent dimmable constant current LED Driver with strain-relief
Dimmable via DALI / DALI-2
Dimming range 1 – 100 % (whole operating window)
Output current adjustable between 350 – 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
Max. output power 25 W
Up to 90 % efficiency
Power input on stand-by < 0.15 W
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Strain relief with loop through function
Interfaces
one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 0° / 45° push terminals (input / output)
Functions
Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2)
Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)
Constant light output function (CLO)
Power-up fading at AC
Configurable via ready2mains
Switch off the Driver with fade2zero
Service monitor to log certain events
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Suitable for emergency escape lighting systems acc. to EN 50172
For cable cross-sections up to 2.5 mm²
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
Flexible configuration via DALI, ready2mains and I-SELECT 2
No tools required for installation
Typical applications
For downlight, spotlight and decorative applications