Product description Dimmable constant current LED driver (SELV) Independent driver with strain-relief housing Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids) Dimmable via leading edge and trailing edge phase dimmers Trailing edge is a benefit in terms of noise compared to leading edge Dimming range 5 to 100 % (depending on dimmer) For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711 Max. output power 7.6 W Output current 180 mA Nominal lifetime up to 50,000 h 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions) Compact drivers Data sheet

Read more less

Product description Ready-for-use resistor to set output current value Compatible with LED driver featuring I-select 2 interface; not compatible with I-SELECT (generation 1) Resistor is base insulated Resistor power 0.25 W Current tolerance ± 2 % additional to output current tolerance Compatible with LED driver series PRE and EXC Show more

Read more less

The Tridonic PC 1x28-34 HO DD COMBO is a combination electronic ballast and emergency lighting unit to run 1 x 28w 2D 4Pin compact fluorescent. They have a 3 hour rated duration and should be used with a 4 cell battery pack. These ballasts come with a 5-year warranty. Tridonic article number: 89899958 Dimensions: 123 x 79 x 31mm

Read more less

The Tridonic Tridonic LCA 60w 900-1750mA one4all SR PRE is a 60W Tridonic Dali dimmable LED driver with an adjustable output current of 900-1750mA. This driver has a max output power of 60w and an average life of 100,000 hours.

Read more less

This item is now obsolete , please call for viable alternatives  2000w MBIL Ignitor - G53468 - Tridonic ZRM20ESB

Read more less

Tridonic 2x49w T5 Basic Ballast - PCA 2/49 T5 BASIC - 22185083

Read more less

Product description Capacitive Touchpanel High-quality appearance with real glass display Multiple control modules are possible in a DALI system Power supply via DALI line Double terminals for through wiring Adjustment of DALI lighting group with “Group” rotary switch Individual adjustment of start number of lighting scenes with “Scene” rotary switch 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions) Type TW: Tunable white (colour converter) control (colour temperature along the Planckian Locus, Colour temperature Tc) EAN/UPC: 9006210642307 Country of Origin: CN

Read more less

Tridonic Choke for 150W Metal Halides and Sons

Read more less

NiMH Battery pack 2.2 – 4.0 Ah Nickel-Metal Hydride cells (NiMH) Battery pack 2.2 Ah Battery pack 4.0 Ah Battery pack 2.2 Ah Battery pack 4.0 Ah Product description High-temperature NiMH battery pack for use with emergency lighting units 4 year design life 1 year guarantee from delivery date Properties Constant high-temperature operation Temperature depending on the used emergency lighting unit (refer to respective emergency control gear data sheet) Good charging properties at high temperature High energy maintenance of the charged battery Certified quality manufacturer Casing material made of polycarbonate 1.0 mm² stranded wire Suitable for emergency lighting equipment as per IEC 60598-2-22   Data sheet  

Read more less

2X35/49w T5 Excel ONE4ALL - Tridonic - 22185106

Read more less

15W Choke obsolete , you will be sent an 18W variant as an alternative  

Read more less

I-SELECT 2 PLUG PRE / EXC Resistors for current selection Product description Ready-for-use resistor to set output current value Compatible with LED driver featuring I-select 2 interface; not compatible with I-SELECT (generation 1) Resistor is base insulated Resistor power 0.25 W Current tolerance ± 2 % additional to output current tolerance Compatible with LED driver series PRE and EXC Example of calculation R [kΩ] = 5 V / I_out [mA] x 1000 E96 resistor value used Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W; base insulation necessary When using a resistor value beyond the specified range, the output current will automatically be set to the minimum value (resistor value too big), respectively to the maximum value (resistor value too small)

Read more less