89800563  EMconverterLED BASIC 204 NiCd/NiMH 250V   Product description Emergency lighting LED driver for manual testing For self-contained emergency lighting For LED modules with a forward voltage of 50 – 250 V Low profile cross-section (21 x 30 mm) For luminaire installation EM = Emergency Nominal lifetime up to 100,000 h 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions)

Read more less

Tridonic 28003603 LC 60/150-550/230 o4a NF h16 EXC4   Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED driver Dimming range 1 to 100 % (min. 5.5 mA) For luminaires of protection class I and protection class II Adjustable output current between 150 and 550 mA Max. output power 60 W Up to 94 % efficiency Power input on stand-by < 0.14 W Nominal lifetime up to 100,000 h 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions)

Read more less

89899756 LED EM Green UHB Emergency lighting accessories Status indication green LED EM Product description_ A green LED indicates that charging current is flowing into the battery

Read more less

89800702   EMpowerLED BASIC FX 202 LiFePO4 2W SCREW EM LED drivers Product description_ Self contained emergency lighting LED driver for manual testing_ Non-maintained and maintained operation_ For luminaire installation_ EM = Emergency_ Nominal lifetime up to 100,000 h_ 5 years guarantee (conditions athttps://www.tridonic.com/en/int/services/manufacturerguarantee-conditions)Functions_ 1 or 3 h rated duration depending on connected battery_ For 1 or 2 LEDs connected in series_ Automatic detection of connected LED load_ Switched live for switching the LED outputBattery management_ Intelligent charge system_ Deep discharge protection_ Temperature protection_ Polarity reversal protection for battery provided by 3-poleconnectorBatteries_ LiFePO4 batteries with Tridonic LiFeGuard_ Temperature-protected_ Overcharge-/Overdischarge protection_ Ensures safety in use_ LiFePO4: up to 12 years design life_ 8 years guarantee for LiFePO4 batteries (conditions athttps://www.tridonic.com/en/int/services/manufacturerguarantee-conditions) 1_ For battery compatibility refer to data sheet, battery selection1 28005859 - 5 Jahre Garantie. 28006323 - 4 Jahre Garantie.LiFeGuardWebsitehttp://www.tridonic.com/89800701

Read more less

Product description_ High-temperature NiCd battery pack for use with emergencylighting units_ Please note that due to EU law, this article is available forpurchasing only outside of the European Union._ 4 year design life_ 2 years guarantee (conditions athttps://www.tridonic.com/en/int/services/manufacturerguarantee-conditions)Properties_ Constant high-temperature operation_ Temperature depending on the used emergency lighting unit(refer to respective emergency control gear data sheet)_ Good charging properties at high temperature_ High energy maintenance of the charged battery_ Certified quality manufacturer_ Casing material made of polycarbonate_ 1.0 m integrated double-insulated cable_ 1.0 mm² solid wire, pre-stripped_ Suitable for emergency lighting equipment as per IEC 60598-2-22

Read more less

New article (28005037) with updated NFC interface for compatibility with ID ECCO Smart 2D-TR Constant current LED driver for luminaire installation For class I luminaires Adjustable output current between 200 and 800 mA via NFC Max. output power 90 W Up to 95 % efficiency Nominal lifetime up to 100,000 h

Read more less

The most important features at a glance: - Energy efficiency class A2 BAT - Service life of up to 100,000 h - Intelligent Voltage Guard (overvoltage display and undervoltage shutdown) - Precise lamp operation by adjusting the lamp parameters - Advanced SMART heating for at least 50,000 starts without changing the lamp - Constant luminous flux regardless of mains voltage fluctuations - For lights of protection class I + II - Automatic restart after lamp replacement - Safety shutdown of defective lamps and at the end of lamp life - Insulation displacement terminals (IDC) for fast automatic and manual wiring - For emergency lighting systems in accordance with EN 50172

Read more less

Accu - NiMH 4Ah 3A CON Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet) Low profile cross-section 21 mm Good charging properties at high temperature High energy maintenance of the charged battery Certified quality manufacturer In various configurations Simple connection with plug-in system

Read more less

Driver LC 38W 400-700mA flexC lp SNC4 Linear drivers Data sheet Product description Constant current LED driver for luminaire installation For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Selectable fixed output current 700, 600, 500 and 400 mA Max. output power 37.8 W Up to 86.5 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee (conditions at www.tridonic.com)

Read more less

The Tridonic I-SELECT 2 PLUG 700MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001118

Read more less

Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED Driver Dimming range 1 to 100 % For luminaires of protection class I and protection class II Output current adjustable between 150 – 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI Max. output power 35 W Up to 88 % efficiency Power input on stand-by < 0.2 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° push terminals Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the Driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Intelligent Voltage Guard (overvoltage and undervoltage monitoring) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Flexible configuration via companionSUITE Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 Reliability proven by lifetime up to 100,000 h and 5 years guarantee Typical applications For linear/area lighting in office applications

Read more less

Pictured with Strain relief ( separate product  )  https://www.easy-controlgear.com/products/strain-relief-set-43x30mm-280001168 Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Dimming range 1 to 100 % For luminaires of protection class I and protection class II Output current adjustable between 250 – 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI Max. output power 17 W Up to 86 % efficiency Power input on stand-by < 0.2 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 45° push terminals Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 Typical applications For linear/area lighting in office applications

Read more less