• High efficiency • Good to excellent color rendering • Excellent color stability • Small loss of luminous flux over the life of the lamp • Hot restrike capable • Compact dimensions for small spotlights • Good positioning thanks to K12s base
• Sports stadiums and floodlight systems • Sports halls and multi-purpose halls • Airports • Solar simulation, material testing • Approved only for use in enclosed luminaires • Outdoor applications only in suitable luminaires
HRI-TS 2000W/N/L.
Radium 2000 watt long arc lamp used in Sports Facilities and Stadia.
Length – 274mm.
Base – K12s.
Colour Temp (k) – 4100.
Life – 8000 hrs.
Availability – In Stock.
HRI-TS 2000W/N/L.
Brand – Radium.
Colour – Cool White.
Article number – 32416582
H2KNL
Also known as a HRI-TS 2000W/N/L/400/K12S.
Data Sheet – Radium HRI-TS 2000W/N/L
Recommended Ballast, Ignitor and Capacitor for this lamp.
Obsolete the below alternative will be sent
https://www.easy-controlgear.com/products/mackwell-s3che-mw-emergency-module-58w-mackwell-3-cell?_pos=1&_sid=2cccf60fe&_ss=r
4-36w 3hr emergency lighting module
Volts:220 - 240 v
Watts:4 x 36 w
Length:165 mm
Height:29 mm
Width:45 mm
Weight:0.324kg
Technology: Electronic
Size:165 x 45 x 29 mm
Other codes:
HRN/3
The Liteplan HRN 4 Conversion Kit is a 3hr emergency lighting conversion kit suitable for 4-58w fluorescent lamps. This unit is to suit multiple 4-pin fluorescent lamp wattages and circuits. 4-pole change over relay plus additional 5th pole for HF ballast isolation. This conversion kit has these additional benefits :- 4-pole changeover relay, Additional 5th pole relay, Deep discharge protection, Low profile enclosure, Constant current charger, High temperature niCd cells. The HRN range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm Green charge healthy LED indicator and mounting collar, 3/4/5 Cell kits are supplied with NiCd batteries and AMP irreversible battery connector.
Product family benefits
Very low power consumption thanks to high efficiency
Through-wiring possible on the primary side
Large temperature range
Protective operation throughout the entire partial-load range for long lamp life
Areas of application
Effect and accent lighting
Living rooms
Object lighting
Conference rooms
Restaurants
Recessed and surface-mounted ceiling luminaires
Shop lighting
Event rooms
Technical Data
Electrical data
Lamp wattage
35…105 W
Maximum output power
105 W
Line current
0.45 A
Input voltage DC
176…275 V
Nominal voltage
230…240 V
Power factor λ
0.95
Operating frequency
40 kHz
Nominal output voltage
11.6 / 11.4 V
Mains frequency
50…60 Hz
System wattage
108.00 W
Efficiency in full-load
95 %
Max. ECG no. on circuit breaker 10 A (B)
23
Galvanic isolation primary/secondary
4.00 kV
Max. ECG no. on circuit breaker 16 A (B)
38
Networked standby power
0.50 W
Inrush current
0.6 A
Dimensions & weight
Length
170.0 mm
Width
44.0 mm
Height
34.0 mm
Wire preparation length, input side
8.0 mm
Wire preparation length, output side
8.0 mm
Mounting hole spacing, length
140.0 mm
Product weight
160.00 g
Temperatures & operating conditions
Ambient temperature range
-20…+50 °C
Maximum temperature at tc test point
75 °C
Additional product data
Design / version
Long with cable clamp
Capabilities
Dimming method
Phase cut-off
Dimming interface
DALI or Touch DIM/Touch DIM Sensor
Overload protection
Automatic reversible
Overheating protection
Automatic reversible
Short-circuit protection
Automatic reversible
Max. cable length to lamp/LED module
2.0 m
Cable/wire types, input side
H03VV-F 2x0.50 / H03VV-F 2x0.75 / H03VVH2-F 2x0.75 / H05VVH2-F 2x0.75 / H05VV-F 2x2.5 / H05VV5G 1.5 / NYM-O 2x1.5 / NYM-J 3x1.5 / NYM-J 5x1.5 mm²
Cable/wire types, output side
H03VV-F 2x0.75 / H05VV-F 2x0.75 / H05VV-F 2x1.5 / H05VV-F 2x2.5 / NYM-J 3x1.5 / NYM-J 3x2.5 / NYM-O 2x1.5 mm²
Dimmable
Yes
Dimming range
0.1…100 %
No-load proof
Yes
Intended for no-load operation
No
Certificates & standards
Approval marks – approval
E1 approval / VDE / VDE-EMC
Standards
Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 61347-2-2
Type of protection
IP20
Logistical data
Commodity code
850440909000
Environmental information
Date of Declaration
10-11-2021
Primary Article Identifier
4008321420633
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
1b7fa333-bfff-4d5d-a686-eec22e4e177d
Constant current designWide input range 180~528VACThree in one dimming function (0~10Vdc or 10V PWM signal or resistance)Protections: Short circuit/ Over current/ Over voltage/ Over temperatureOther features:Built-in active PFC functionHigh efficiency up to 90.5%Cooling by free air convectionIP67 design for indoor or outdoor installationsSuitable for LED lighting and street lighting applicationsCompliance to worldwide safety regulations for lightingSuitable for dry/ damp/ wet locations5 year warrantyMore Information
Manufacturer
Mean Well
Output Wattage (W)
65
Output Current
350mA
Dimmable (Type)
1-10VDC, PWM signal, resistance
Output Voltage Range (V)
18~186
Dimensions
189x 61.5x 36.8
EMC Standards
Compliance to EN55015, EN61000-3-2 Class C (?60% load) ; EN61000-3-3, FCC part 15 class B, EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A
Input Voltage
180~528VAC, 254~747VDC
Safety Standards
UL8750, CSA C22.2 No. 250.0-13, ENEC EN61347-1, EN61347-2-13, EN62384, independent, IP67 approved
Output Voltage Options
Single
Working Temperature
-30~+60°C (Refer to "Derating Curve")
PDF Datasheet
HVGC-65-spec.pdf
