More Information Manufacturer Ecopac Power Output Wattage (W) 60 Output Voltage 12V Dimmable (Type) No Dimensions 116.3 x 51 x 31.7 mm ECD-65-C12-C14

Read more less

Please note tridonic out of stock until May , a quality unbranded will be sent in its place  LiFePO4 Battery pack 3.0 Ah Lithium Iron Phosphate cells (LiFePO4) Product description High temperature LiFePO4 cells for use with EM ready2apply surface mounted emergency lighting units 6 year design life (up to 30 °C ambient temperature) 4 year design life (up to 40 °C ambient temperature) 3 years guarantee battery for EM R2A BASIC 4 years guarantee battery for EM R2A ST/PRO Properties Certified quality manufacturer Charge efficiency > 90 % Low self discharge Simple connection with plug-in system Protection and monitoring circuit built into battery enclosure Deep discharge protection Suitable for emergency lighting equipment as per IEC 60598-2-22   Data sheet  

Read more less

Driver from the prestigious company LIFUD, specially designed for LED panels, LED downlights, LED panels and LED ceiling lights because it incorporates the Jack ... An LED driver is in charge of transforming the alternating current of the electrical network into direct current suitable to make the LED chips shine. To know if a driver is going to work with our luminaire, PCB or panel we must consult the voltage and the output current of the driver. Characteristics of LIFUD Driver Connection Jack 33-40V DC 32W This driver has a multi-voltage output which means that it can deliver a constant voltage within a range allowing the same driver to be used for various applications with different current and voltage requirements. Once the driver is powered up, the voltage will be automatically adjusted and the voltage at the output will be constant. Its power factor is very high, making it a very efficient driver.

Read more less

The LIFUD TRIAC Dimmable Driver Jack connection Output 25-40 DC 14W LF-GDE014YG  of the prestigious brand LIFUD is specially designed for LED panels, LED downligh because it incorporates the universal jack connector. A LED driver transforms the alternating current from the electrical network into direct current suitable for shining LED chips. To know if a driver is going to work with our luminaire, PCB or panel we must consult the voltage and the output current of the driver. Characteristics of the LIFUD TRIAC Dimmable Driver Jack connection Output 25-40 DC 14W LF-GDE014YG  This driver has a multi-voltage input. This means that it is able to withstand ups and downs in line voltage for a short period of time without damage. In addition, its output is also multi-voltage which means that it can deliver a constant voltage within a range allowing the same driver to be used for various applications with different current and voltage requirements. Once the driver is powered, the voltage will be automatically adjusted and the output voltage will be constant. The TRIAC Dimmable driver must be used in conjunction with a TRIAC LED regulator which will allow us to easily select the desired light intensity. Its power factor is very high, making it a very efficient driver

Read more less

The Lite-Plan HRN/T5/4/14+24 is a 3hr emergency lighting conversion lit. Specifically designed for use with 14w & 24w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar, 4 Cell kits are supplied with T1 NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

Read more less

The Lite-Plan HRN/T5/4/14+24 is a 3hr emergency lighting module. Specifically designed for use with 14w & 24w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells.

Read more less

The Lite-Plan HRN/T5/6/28+54 is a 3hr emergency lighting conversion kit. Specifically designed for use with 28w & 54w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar,  NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

Read more less

obsolete you will be sent an alternative    The Lite-Plan HRN/T5/6/35+49 is a 3hr emergency lighting conversion kit. Specifically designed for use with 35w & 49w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar, 6 Cell kits are supplied with T1 NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

Read more less

This item is obsolete please consider the  below as a viable alternative  ALTERNATIVE  The Lite-Plan HRN/T5/6/35+49 is a 3hr emergency lighting module. Specifically designed for use with 35w & 49w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells.

Read more less

he NLP range, is a high quality 3 hour switchable emergency lighting module designed to suit a wide range of LED types, circuits, and applications.  Liteplan tested and verify full compatibility with Ledison T8, T5 tube lights, GU10 spots and GLS LED bulbs.  KEY ELECTRICAL CHARACTERISTICS Module, Single Cell Battery and Charge LED Indicator for 6-55 Volt LED Loads Suitable for Mounting Inside the Luminaire Slim Module Suitable for Linear Applications Long Life LiFePO4 Batteries Strain Relief Module with Fitted Cables Suitable for a Wide Range of LED Loads TECHNICAL SPECIFICATIONS A 3 hour emergency lighting conversion kit which operates with Long Life LiFePO4 batteries. The unit is designed to suit an extremely wide range of LED types and circuits. The NLP/1 automatically adjusts the output LED current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The batteries used with this unit not only provide double the life of traditional emergency lighting batteries, but consume far less power during their operational life.   Mains Supply Voltage 230-240V AC 50/60Hz Emergency Duration 3 Hours Recharge Period 24 Hours LED Current Limit 320mA Battery Current Limit 1100mA Cut off Voltage 2.5V

Read more less

Emergency Module 6 Cell 4-100W Florescent ballast  Suitable for Most Compact Fluorescent Lamps • Deep Discharge Protection • Four Pole Changeover Relay • Fifth Pole Relay for Ballast Protection • High Temperature NiCd Batteries • Compact Module Dimensions • Can be Provided in Various Remote Enclosures • Operates One Lamp Within Multi Lamp Circuits A 3 hour emergency lighting conversion kit which operates with high temperature 7.2V NiCd batteries. The unit is designed to suit a wide range of fluorescent tubes. Order Codes HRN/6-K For the converison of fluorescent tubes from 4W to 125W. Supplied as module, battery and LED kit. HRN/6-R As above, but supplied within a suitable remote enclosure with a connecting loom. Technical Details: Mains Supply 230-240V AC 50/60 Hz Power Rating 22mA λ = 0.88 Emergency Duration 3 hours Battery Type 7.2V 4.5Ah NiCd Charge Current 200mA Cut-Off Voltage 6V Discharge Current 1.05 Amp Tc Point and Temperature 70 °C Case Side Module Dimensions (LxWxH) 165mm x 45mm x 29mm Battery Dimensions (LxØ) 2 x 220mm x 37mm Overall Kit Weight 1.1Kg  

Read more less

14/24w T5 Emergency Module

Read more less