12v 6a LED Driver 50/60Hz  AC70 are 11.5Vac 6A output AC-AC Electronic transformers designed for 0-70W LED lighting applications and halogen lamps requiring a supply of 12V AC. Suitable for use with leading and trailing edge dimmers; where using with LED lamps you must ensure suitable match between dimmer, lamp and driver.

Read more less

Three in one dimming function (0/1-10Vdc or PWM signal or resistance)Dimming range: 0-100%Universal AC input/full range 100-265VACBuilt-in active PFC function (>0.98)High efficiency up to 83%Protections: Short circuit/Over current/ Over loadingFully isolated plastic case with terminals IP20Compliance to worldwide safety regulations for lightingMore Information Manufacturer Ecopac Power Output Wattage (W) 45 Output Voltage 24V Dimmable (Type) 1-10VDC, PWM signal, resistance Dimensions 179x 60.4x 35.2mm EMC Standards Compliance to EN55015, EN61000-3-2 (>50%load), Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, A light industry level Input Voltage 100-265Vac Safety Standards EN61347-2-13, IP66 Output Voltage Options Single Working Temperature -40~+60°C PDF Datasheet ELED-45-V_Series_1.pdf

Read more less

Product family features Line frequency: 0 Hz | 50 Hz | 60 Hz Versatile DALI window driver up to 80 W due to flexible output characteristic Supply voltage: 220…240 V Available with output current range: up to 2,100 mA Constant Lumen Output (CLO) Integrated customizable thermal management (Driver Guard) DALI-2 certified (Part -101,-102 and -207) Product family benefits Fully programmable via software (DALI Interface) Flexible current setting (LEDset2) Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions) High quality of light thanks to <1% output ripple current Very high efficiency Very low standby power consumption: < 0.15 W * Fulfill safety requirement due to overload, overtemperature, Hot Plug protection Versatile scope of application due to OSRAM DALI Technology: Easy to use in corridors and restrooms because of three-level Corridor function Touch DIM application: easy to control via pushbutton or sensor Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable Feedback of power consumption and operating hours (Fit for SMART GRID) Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting Luminaire information for easy maintenance Areas of application Linear lighting for office, education, storage areas and retail Installation in emergency lighting systems according to IEC 61347-2-13, appendix J Suitable for luminaires of protection class I Ecodesign regulation information: Intended for use with LED modules. The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable. Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled. Find technical data and additional assets in our datasheet Product Datasheet

Read more less

Specifications Operating and Electrical Output Current (Max) 1050 mA Output Current (Min) 300 mA Output Voltage (Max) 54 V Output Voltage (Min) 24 V Mechanical and Housing Housing WH Independent Housing Dimensions 200 x 75 x 32 Product Data Full product code 871869961042500 Order product name Xitanium 36W WH 0.3-1.05A 54V Is G2 EAN/UPC - Product 8718699610425 Order code 929001471106 Numerator - Quantity Per Pack 1 Numerator - Packs per outer box 20 Material Nr. (12NC) 929001471106 Net Weight (Piece) 0.140 kg

Read more less

This high quality waterproof IP 65rated RGBW LED strip is suitable for outdoor use or indoors in wet conditions. Fully colour changing plus warm white (3000K) ensures this LED strip can achieve effects only limited by your imagination.  The LED strip has an adhesive back and short cutting points which makes installation easy even in the trickiest of situations. Supplied in 5m rolls and can be joined.  Connect via one of our dimmable or non dimmable 24V IP Rated LED drivers. For further technical information download the datasheet.  Features: 2 Year Warranty 60 SMD LEDs per meter (type 5050) RGBW (Warm White) 3000 lumen luminous flux at 5 m Width of the strips: 12 mm Large beam angle for homogeneous illumination of 120 degrees 5 m roll, flexible tape Power consumption 16W per meter Flexible and easy installation Can be shortened Self-adhesive, by adhesive surface on the backMore Information Manufacturer Optonica Colour Option RGB + WW Watts per Meter 16W Input Voltage 24V Lumens per Meter 600 Strip Length (M) 5M LEDs Per Meter 60 warranty 2 Years PDF Datasheet ST4484.pdf

Read more less

Dimension 30W 12V 166x24x52mm Transformers Drivers Ballasts|Description|Product Driver Transformers Drivers Ballasts|Description|Type Constant Voltage Transformers Drivers Ballasts|Description|Qualifier LED Transformers Drivers Ballasts|Description|Secondary Voltage 12 V Transformers Drivers Ballasts|Description|Primary Voltage 220/240 V Transformers Drivers Ballasts|Description|Primary Current 0.17 A Transformers Drivers Ballasts|Description|Secondary Voltage Type DC Transformers Drivers Ballasts|Features|Power Rating (VA) 30 VA Transformers Drivers Ballasts|Features|Mounting Surface Transformers Drivers Ballasts|Features|Ingress Protection IP20 Transformers Drivers Ballasts|Features|Number of Modules 1 Transformers Drivers Ballasts|Material & Finish|Colour White Transformers Drivers Ballasts|Dimensions|Height 52 mm Transformers Drivers Ballasts|Dimensions|Width 166 mm Transformers Drivers Ballasts|Dimensions|Depth 24 mm Transformers Drivers Ballasts|Technical Data|Frequency 50/60 Hz Transformers Drivers Ballasts|Technical Data|Number of Phases Single Transformers Drivers Ballasts|Technical Data|Minimum Operating Temperature -15 Degrees C Transformers Drivers Ballasts|Technical Data|Maximum Operating Temperature 45 Degrees C Transformers Drivers Ballasts|General|CE Approved Y Transformers Drivers Ballasts|Features|Ingress Protection (EF005474) IP20 Transformers Drivers Ballasts|Material & Finish|Colour (EF003882) White Transformers Drivers Ballasts|Dimensions|Height (EF000040) 52 mm Transformers Drivers Ballasts|Dimensions|Width (EF000008) 166 mm Transformers Drivers Ballasts|Dimensions|Depth (EF000049) 24 mm Transformers Drivers Ballasts|Features|Mounting (EF000003) Surface Transformers Drivers Ballasts|Material & Finish|Colour (EF000007) White Transformers Drivers Ballasts|Dimensions|Height (EF008809) 52 mm Transformers Drivers Ballasts|Dimensions|Width (EF008808) 166 mm Transformers Drivers Ballasts|Dimensions|Depth (EF008810) 24 mm

Read more less

EM powerLED BASIC FX SC MH/NiCd 32 W Combined emergency lighting LED driver Product description Combined emergency LED driver for manual testing For self-contained emergency lighting Can be either used built-in or independent with clip-on strain-relief (see accessory) Max. output power 32 W Nominal lifetime up to 100,000 h 5 years guarantee Functions Adjustable output current between 350 and 700 mA via I-SELECT 2 plugs Protective features (overtemperature, short-circuit, overload, no-load, input voltage range) Suitable for emergency escape lighting systems acc. to EN 50172 1 or 3 h rated duration depending on connected battery Constant power output in emergency mode Battery management Intelligent charge system Deep discharge protection Polarity reversal protection for battery Short-circuit-proof battery connection Batteries NiCd or NiMH batteries 4 year design life 1 year guarantee For battery compatibility refer to datasheet, battery selection

Read more less

this product is not currently available , we would suggest an alternative please see below    https://www.easy-controlgear.com/products/mackwell-led-driver-dali-dimmable-33w-700ma-48v?_pos=2&_sid=78b811065&_ss=r Product Details Harvard CoolLED LED Driver provide a high-performance solution for powering high-brightness LEDs from a mains supply. It has an ability to control individual LED luminaries and simultaneous control of all or specified groups. High Efficiency and Long-Life design ensure cool operation and long life with extra benefit of a very low off power. Isolated DALI interface. Constant current output. Self-resetting thermal trip. Double insulated, electrical efficiency class II. Up to 88% efficiency. LED string fault reporting. Isolated DALI interface. Lamp fault reporting checks on LED string volts. · Isolated DALI interface · Constant current output · Self resetting thermal trip · LED string fault reporting · Lamp fault reporting checks on LED string volts Specifications Technical data Information Brand Harvard Power Systems Commodity 8504409090 Item number CL700D2-240-C Warranty pack 60 Months Bring-In Series CL RoHS Compliant Description AC-DC 33W LED driver Constant Current mode (CC); Max. output 48Vdc at 0.7A; IP20; Dimming with DALI; Remote control Packing Quantity 40 Application LED EN 61347 Net weight (gram) 130 Technology AC/DC Constant Current C.C. Format Box Type - Enclosed Output Power (W) 33 Output Voltage (V) 48 Output Current (A) 0.7 Input Voltage (V) 220 - 240 IP Rating IP20 Width (mm) 32 Height (mm) 32 Depth (mm) 180 Control Signals Remote Sense Dimming Technology DALI

Read more less

Brand Power LED Style Constant Current Wattage (w) Max 18w Milliamps 700mA Manufacturer's Code PCC70018TD Dimmable Yes - TRIAC Length (mm) 130mm Width (mm) 44mm Height/Depth (mm) 28mm This LED Driver is Suitable for | Output Current | | Voltage Range | | Max Output Power | 700mA 13 - 26V 18 W

Read more less

Triac leading edge phase control main dimmer. Idealy suited to Ecopac ELED triac dimmable LED Drivers, can also be used with other triac dimmable drivers.  These high quality dimming modules can be fitted to most dimmer plates with ease.  Other features: For use with resistive and inductive loads Module case ultrasonically sealed to reduce buzzing Smooth dimming operation from 0-100% light output Integrated over temperature protection fuse 3 years warranty

Read more less

Weight 0.11 kg Voltage (max/rated) 24 Current (amps) 500mA Power (watts) 12 R&N (mV) 55 Efficiency (%) 80%

Read more less

Constant Voltage Design 12V or 24V Output Dimmable using leading edge & trailing edge Triac Dimmers PWM Output 3 Years warrantyMore Information Manufacturer Ecopac Power Output Wattage (W) 100 Output Voltage Choose Option Dimmable (Type) Triac Leading edge & Trailing edge Dimensions 230x70x46mm EMC Standards EMI according to EN55015, EMS according to EN61000-3-2; EN61000-3-3 Input Voltage 180-264VAC Safety Standards EN61347-1, EN61347-2-13 Output Voltage Options Single Working Temperature -40~+60°C PDF Datasheet ELED-100P-T.pdf

Read more less