TCI PROFESSIONALE 38W LED Driver DALI dimmable, Multi Current 300-1050Ma

Read more less

This driver covers nearly all non dimmable constant current options up to 1050MA  Dimming: NOT DIMMABLE Additional technical features: RIPPLE FREE, ACTIVE PFC (pf>0.9), SELV <> Approvals: KEMAKEUR, ENEC, CCC, RCM, CE, EAC, UKCA, Plastic case: IP 20 (Independent Use) Minimum cut-out hole diameter: 50 mm Size: 146 x 22 x 43 mm Product Information Download

Read more less

Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED driver Output current adjustable between 100 – 400 mA Dimming range 1 to 100 % For luminaires of protection class I and protection class II Max. output power 75 W Up to 92 % efficiency Power input on stand-by < 0.15 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° push terminals Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Flexible configuration via companionSUITE Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 Reliability proven by lifetime up to 100,000 h and 5 years guarantee Typical applications For linear/area lighting in office applications replacement for the 28000134 

Read more less

The TCI DC MAXI JOLLY US DALI LED Driver offers versatile multipower output adjustable via dip-switch for precise current selection. Designed for indoor use with IP20 rating, it features Class II protection against electric shock for both direct and indirect contact. Suitable for built-in applications and compatible with lighting equipment of protection classes I and II, it includes an active power factor corrector and an analog input for thermal sensor connection. The driver provides a 12 V auxiliary output (max 100 mA) and maintains current regulation within ±5%, accounting for temperature changes. Input and output terminals are conveniently located on the same side, supporting cables up to 2.5 mm². Robust clamping screws accommodate cable diameters from 3 to 8 mm. Comprehensive protections guard against overheating, short circuits, voltage spikes, and overloads, with thermal protection rated C.5.a.

Read more less

Self-contained emergency lighting LED driver with DALI interface Non maintained operation For LED modules with a forward voltage of 10 – 54 V SELV for output voltage < 60 V DC For luminaire installation Compatible with Tridonic's LLE FLEX modules (ADV, EXC) EM = Emergency Nominal lifetime up to 100,000 h

Read more less

Driver LCA 50W 100–400mA one4all lp PRE premium series non-SELV Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED Driver Output current adjustable between 100 – 400 mA Dimming range 1 to 100 % For luminaires of protection class I and protection class II Max. output power 50 W Up to 92 % efficiency Power input on stand-by < 0.15 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° push terminals Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the Driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Intelligent Voltage Guard (overvoltage and undervoltage monitoring) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Flexible configuration via companionSUITE Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 Reliability proven by lifetime up to 100,000 h and 5 years guarantee Typical applications For linear/area lighting in office applications

Read more less

EM powerLED PRO EZ-3, 1 – 2 W Combined emergency lighting LED Driver 1 – 4 W Screw-fix Clip-fix Screw-fix Clip-fix Product description Emergency lighting LED Driver with DALI interface and automatic test function For self-contained emergency lighting SELV for output voltage < 60 V DC Low profile casing (21 x 30 mm cross-section) 5 years guarantee Properties Mains and emergency operation DALI interface for controlled testing and monitoring DALI switchable in mains operation (on/off); the switched phase SL must be switched on Constant current mode With either screw or clip fastening (clip-fix) 1, 2 or 3 h rated duration Selectable operating time (jumper) Output power limitation Two-colour status display LED Automatic restart after LED replacement Electronic multi-level charge system SELV classified (outputs powerLED, battery, status LED, test switch) Polarity reversal protection for battery Deep discharge protection Very low energy consumption from the battery after activation of the deep discharge protection Short-circuit-proof battery connection Addressing function, patented (“EZ easy addressing”) Emergency lighting LEDs available Tests: Status of the battery Status of the LED Charge condition Function test Duration test Batteries High-temperature cells 2 Ah NiMH batteries Cs cells 4 year design life 1 year guarantee For battery compatibility refer to data sheet

Read more less

Tridonic LC 75/1100-1400/54 flexC lp SNC4 28004144 Constant current LED driver for luminaire installation 3 pin DIP switch version valid from production date: 20.12.2024 For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Selectable fixed output current 1,100, 1,150, 1,200, 1,250, 1,300, 1,350 and 1,400 mA (pre-selected current 1,400 mA) Max. output power 75.6 W Up to 89 % efficiency Nominal lifetime up to 100,000 h

Read more less

  LC43MINI-CC-300-1050 42 W SELV constant current LED driver • SELV output protection for safety and flexibility in luminaires • Low current ripple, complying with IEEE 1789 recommendation • Suitable for use in emergency light applications • Wide output voltage and current range for wide variety of luminaire setups • Extremely compact dimensions for flexible usage • Ideal solution for Class I and Class II luminaires Product code:  5945xxx (see last page) 42 W  220 – 240 V 50 – 60 Hz • For driving Class III (SELV) luminaires, optional strain relief for independent use outside of luminaire (LC-SR-MINI, LC-SR-MINI-B or LC-SR-MINI-LOOP)* *See also last page. Functional Description • Adjustable constant current output: 300 mA to 1050MAH

Read more less

Hybrid HydraDrive: provides the smoothest flicker-free high-performance dimming to dark for every fixture LEDcode2: connects to integrated digital accessories, supports location-based IoT applications and enables wired and wireless lighting control through LEDcode peripheral devices NTC interface for robust thermal management

Read more less

TCI MINIJOLLY 20W LED Driver Mains dimmable, Multi Current 250-900Ma Specification Control Dimming PHASE CUT / IGBT - TRIAC Nominal Input Voltage 220...240 Height 22 Diameter Input Current 250 mA Input Current 300 mA Input Current 350 mA Input Current 400 mA Input Current 450 mA Input Current 500 mA Input Current 550 mA Input Current 600 mA Input Current 650 mA Input Current 700 mA Input Current 750 mA Input Current 800 mA Input Current 850 mA Input Current 900 mA Output Voltage Minimum 15 Output Voltage Minimum 10 Output Voltage Minimum 5 Output Voltage Maximum 48 Output Voltage Maximum 44 Output Voltage Maximum 40 Output Voltage Maximum 36 Output Voltage Maximum 33 Output Voltage Maximum 31 Output Voltage Maximum 29 Output Voltage Maximum 27 Output Voltage Maximum 25 Output Voltage Maximum 23 Output Voltage Maximum 22 IP Rating IP 20 (Independent Use) Output Power Max 20 Output Power Min 11 Width 111 Depth 52 Used to be the  122402 

Read more less

Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Independent dimmable constant current LED Driver with strain-relief Dimmable via DALI / DALI-2 Dimming range 1 – 100 % (whole operating window) Output current adjustable between 350 – 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI Max. output power 25 W Up to 90 % efficiency Power input on stand-by < 0.15 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Strain relief with loop through function Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° / 45° push terminals (input / output) Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the Driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Suitable for emergency escape lighting systems acc. to EN 50172 For cable cross-sections up to 2.5 mm² Benefits Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 No tools required for installation Typical applications For downlight, spotlight and decorative applications

Read more less