A 3-hour 700mA maintained/non-maintained emergency driver designed for constant current LED devices, supplied complete with the latest, extra long life lithium iron phosphate (LiFePO4) battery packs. The unit is designed to power a single LED in emergency mode, which can also be used for night lighting, where required. Replacement for the HJT range 

Read more less

The Lite-Plan HRN/T5/6/28+54 is a 3hr emergency lighting conversion kit. Specifically designed for use with 28w & 54w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar,  NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

Read more less

The Lite-Plan HRN/T5/4/14+24 is a 3hr emergency lighting module. Specifically designed for use with 14w & 24w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells.

Read more less

• Suitable for Most Compact Fluorescent Lamps • Deep Discharge Protection • Four Pole Changeover Relay • Fifth Pole Relay for Ballast Protection • High Temperature NiCd Batteries • Compact Module Dimensions • Can be Provided in Various Remote Enclosures • Operates One Lamp Within Multi Lamp Circuits A 3 hour emergency lighting conversion kit which operates with high temperature 7.2V NiCd batteries. The unit is designed to suit a wide range of fluorescent tubes. Please see lamp compatibility chart to see the BLF that will be achieved for your particular tube.   Technical Details: Mains Supply 230-240V AC 50/60 Hz Power Rating 22mA λ = 0.88 Emergency Duration 3 hours Battery Type 7.2V 4.5Ah NiCd Charge Current 200mA Cut-Off Voltage 6V Discharge Current 1.05 Amp Tc Point and Temperature 70 °C Case Side Module Dimensions (LxWxH) 165mm x 45mm x 29mm Battery Dimensions (LxØ) 2 x 220mm x 37mm Overall Kit Weight 1.1Kg

Read more less

Our range of Nickel Cadmium (NiCd) batteries are offered in various different Voltages, Capacities and Layouts. All batteries are supplied with plugs and leads and where required end caps for panel fixing. Order Codes Order Code Description 3-CD45/S/AS 3.6V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket 3-CD45/P/AS 3.6V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket 3-CD45/PT/AS 3.6V 4.5Ah NiCd Battery Housed in a Poly-carbonate Case With Twin Socket 4-CD45/S/AS 4.8V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket 4-CD45/P/AS 4.8V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket 5-CD45/S/AS 6V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket 6-CD45/TS/AS 7.2V 4.5Ah NiCd Battery in a Twin Stick Formation With End Caps and Twin Socket 6-CD45/P/AS 7.2V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket

Read more less

CBR Changeover Relay Modules The CBR is a changeover relay unit configured to allow a luminaire to be operated normally from the switched lighting supply and also when the local 240V un-switched supply fails. The changeover then draws power from the emergency supply. This can be either 50V, 110V or 240V AC/DC systems or 240V AC static inverter systems.

Read more less

obsolete you will be sent an alternative    The Lite-Plan HRN/T5/6/35+49 is a 3hr emergency lighting conversion kit. Specifically designed for use with 35w & 49w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells. The HRN/T5 range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm green charge healthy LED indicator and mounting collar, 6 Cell kits are supplied with T1 NiCd and 6-Cell with T3 NiCd batteries and AMP irreversible battery connector.

Read more less

please look at download section for full datasheet The D2N/2/HI/WP200/R is supplied as a remote conversion kitfor mounting away from the fitting in damp locations. This kitwould be used in applications where space inside the fitting islimited.   A 3-hour DALI-2 self-test emergency lighting conversion kitwhich operates with extra long life LiFePO4 batteries. The unitis designed to suit an extremely wide range of LED types andcircuits. The D2N/2/HI/WP200/R automatically adjusts theoutput LED current to provide the best match between thebattery and the load, providing maximum illumination whilstensuring full battery duration.  DALI-2 Self-Test Conversion Kit• Deep Discharge Protection• Average Emergency Power 5W• Complete Kit Housed in One Enclosure• Extra Long Life LiFePO4 Batteries• Converts LED Loads from 10-55v Volts• Ingress Protection Rating of IP54• Moulded in High Grade Polycarbonate D2N/2/HI/WP200/R 192 Watts max 24V load

Read more less

echnical Specifications Accessory Type Battery Manufacturer Liteplan Length 235 mm Type Accessory Batteries NiCd Voltage 4.8 Volt Charging Time 15 Hours Width 37 mm

Read more less

OBSOLETE, Liteplan replacement detailed below  Obsolete, Liteplan has replaced it with the NLP/1S/80-K . This is what you will be sent including the new battery which you have to use. Do not use the existing battery a new one will be supplied  as per the below image    LitePlan NED/3/80-K Module Battery and Charge LED Indicator from Lite-Plan Model: NED/3/80/KIT The NED/3/80 Kit is a similar product to the NED/3 Kit, with the voltage range extended from 6-60 Volts to 6-80 Volts converting 2 to 30 LED chips in series. Liteplan's NED emergency lighting conversion modules have been specifically designed to convert a wide range of LED types and automatically adjust to the output current to provide the best match between battery and load, ensuring maximum lumination to battery duration. This product has a load current limit of 2A with an average emergency power of 2.6W. Technical Specifications Control Gear Type Conversion Module Accessory Type Ballast Wattage 5W W Manufacturer Lite Plan Dimming? Non-Dimmable Length 165 mm Type Control Gear LED Current Limit 320mA Bat. Current Limit 1100mA Mains Supply 230-240V AC 50/60 Hz Charge Current 200mA Nominal Recharge Period 24 Hours Compatible Lamp Type LED Control Gear Technology LED

Read more less

A 3 hour 700mA DALI self-test emergency driver designed for constant current LED devices, supplied complete with the latest extra long life LiFePO4 battery packs. This product has plug and play capability with strain relief on the cables making it suitable for recessing into the ceiling void. In keeping with the DALI standard, this unit will revert to standalone self-test if not connected to a DALI operating system. For a full list of our compatible devices, please see our LED Device range. This product can operate with the LiteMesh wireless system. DALI 2 Emergency Downlight 3W 6000K, LiFePo4 Battery, IP65, 220-240V Product supplied maintained - can be wired non-maintained 3 hour emergency duration Compatible with all DALI 1-1 Systems 43mm Cutout 3-year guarantee same  as  E/DLDA/3/OA

Read more less

This is a Liteplan NDA/3/80 3 cell emergency module for use 2 with 2-30 LEDs in series (6-80v). Module size: 165mm x 45mm 29mm. Fixing points 155mm.

Read more less