28005035 LC 60/150-550/220 flexC NF h16 EXC4 Product description New article (28005035) with updated NFC interface for compatibility with ID ECCO Smart 2D-TR Constant current LED driver for luminaire installation For class I luminaires Adjustable output current between 150 and 550 mA via NFC Max. output power 60 W Up to 93.5 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions)

Read more less

28002090 ACCU-NiMH 2.2Ah 5A Product description_ High-temperature NiMH cells for use with emergency lightingunits_ 4 year design life_ 2 years guarantee (conditions athttps://www.tridonic.com/en/int/services/manufacturerguarantee-conditions)Properties_ Cadmium free_ Constant high-temperature operation – depending on theemergency lighting unit used (refer to respective emergencycontrol gear data sheet)_ Low profile cross-section 23 mm (without end caps)_ Good charging properties at high temperature_ High energy maintenance of the charged battery_ Certified quality manufacturer_ In various configurations_ Simple connection with blade terminal_ With polycarbonate fixing caps and connecting cable_ Electrical connection with mounted end caps possible_ Suitable for emergency lighting equipment as per IEC 60598-2-22  

Read more less

Tridonic LC 200W 24V SC SNC 87500855

Read more less

     Emergency lighting supply unit for manual testing• For linear and compact fluorescent lamps• Low-profile casing (21 x 30 mm cross-section)• 5-year guaranteeProperties• Non maintained operation• 1 or 3 h rated duration• Operating time selectable with plug (duration link)• Compatible with all electronic ballasts(dimmable and non-dimmable)• 5-pole technology: 4-pole lamp changeoverand delayed power switching for the ballast• High-frequency ac operation of the lamp• Gentle on the lamp thanks to preheated lamp start and permanent cathode heating in emergency mode• 5.5 min. boost start for rapid heating of the lamp, morelight in the startup phase and optimum lamp life• Power control technology ensures maximum emergency ballastlumen factors (EBLF) for all lamps• Green charge status display LED• Electronic multi-level charge system• „Rest mode“ function• Deep discharge protection• Very low energy consumption from the battery after activation ofthe deep discharge protection• Short-circuit-proof battery connection• Polarity reversal protection for batteryBatteries• High-temperature cells• NiCd or NiMH batteries• D- Cs- or LA cells• 4-year design life• 1-year guarantee• For battery compatibility refer to chapter„Ballast-Lumen-Factor (BLF)“ÈStandards, page 8Wiring diagrams and installation examples, page 11EM BASIC lp G2, 220 – 240 V 50/60 HzBASIC version TC-F TC-DD T5cTC-LTCDELTC-SELTC-TELT5 T8PH

Read more less

  89800270 LED EM GREEN 300mm CON A green LED indicates that charging current is flowing into thebattery_ 0.3 / 1.0 m cable length Plug connection

Read more less

28001250 Driver LCA 75W 250–550mA one4all lp PRE Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED driver Dimming range 1 to 100 % For luminaires of protection class I and protection class II Output current adjustable between 250 – 550 mA Max. output power 75 W Up to 92 % efficiency Power input on stand-by < 0.15 W Nominal lifetime up to 100,000 h 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions) Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° push terminals Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Flexible configuration via companionSUITE Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 Reliability proven by lifetime up to 100,000 h and 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions) Typical applications For linear/area lighting in office applications

Read more less

  87500274 LCBI 10W 350mA PHASE-CUT/1-10V SR   Product description Independent dimmable LED driver Constant current LED driver Dimmable via leading edge and trailing edge phase dimmers Dimmable via 1 ... 10 V Output dimmed analogue (current amplitude) Dimming range typ. 10 to 100 % (depending on dimmer) For luminaires of protection class I and protection class II For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711 Temperature protection as per EN 61347-2-13 C5e SELV Output current 350 mA Output power 10 W Nominal lifetime up to 50,000 h 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions)

Read more less

Product description_ High-temperature NiCd cells for use with emergency lighting unit_ Please note that due to EU law, this article is available forpurchasing only outside of the European Union._ 4 year design life_ 2 years guarantee (conditions athttps://www.tridonic.com/en/int/services/manufacturerguarantee-conditions)Properties_ Constant high-temperature operation – depending on theemergency lighting unit used (refer to respective emergencycontrol gear data sheet)_ Good charging properties at high temperature_ High energy maintenance of the charged battery_ Certified quality manufacturer_ In various configurations_ Simple connection with blade terminal respectively plug terminal_ With polycarbonate fixing caps and connecting cable_ Electrical connection with mounted end caps possible_ Suitable for emergency lighting equipment as per IEC 60598-2-22

Read more less

Description Tridonic 89800024 EM 36 PRO EZ-3 Product description Emergency lighting supply unit with DALI interface and automatic test function  For linear and compact fluorescent lamps Low-profile casing (21 x 30 mm cross-section) Properties DALI interface for testing and feedback 1 or 3 h rated duration Compatible with all electronic ballasts (dimmable and non-dimmable) 5-pole technology: 4-pole lamp changeover and delayed power switching for the ballast High-frequency ac operation of the lamp Power control technology ensures maximum emergency ballast lumen factors for all lamps on a given module Gentle on the lamp thanks to permanent cathode heating in emergency mode 5.5 min. boost start for rapid heating of the lamp, more light in the startup phase and optimum lamp life Standard and high ballast lumen factor for 1 hour types Electronic multi-level charge system “Rest mode” function 6 Cell 7.2V 4Ah Battery required (Sold Separately) 

Read more less

This LED module is designed for linear and panel lighting applications, featuring a SELV design with a forward voltage below 60 V. It offers two terminal options: 2 terminals for serial wiring and 4 terminals suitable for parallel, serial, or robotic wiring. Part of a high-efficiency LED system, it delivers up to 166 lm/W overall, with module efficacy reaching 187 lm/W. It provides high-quality light with a CRI above 80 and tight MacAdam 3 color tolerance. Available in multiple color temperatures from 2,700 K to 6,500 K, it ensures uniform illumination even when multiple modules are combined. Quick push terminals and a wide range of lenses and covers simplify installation. Rated for 50,000 hours (L80F10) with a 5-year warranty.  • Ideal for linear and panel lights• SELV module – the single module has a forward voltage < 60 V• Terminals – 2 variants:2 terminals for serial wiring4 termninals for parallel, serial or robot wiring• LED system solution with outstanding system efficacy up to166 lm/W, consisting of linear LED modules and dimmableLED Driver LCA 50W 100–400mA lp PRE• Efficacy of the module up to 187 lm/W• High colour rendering index CRI > 80• Small colour tolerance MacAdam 31• Small luminous flux tolerances• Colour temperatures 2,700 K, 3,000 K, 3,500 K, 4,000 K, 5,000 Kand 6,500 K• Perfectly uniform light, even if several LED modules are usedtogether in a line• Push terminals for quick and simple wiring of LED module toLED module• Broad portfolio from extruded lenses and covers available• Simple installation (e.g. clips or screws)• Long life-time: 50,000 hours (L80F10)• 5-year guarantee

Read more less

This LED module is designed for linear and panel lighting applications, featuring a SELV design with a forward voltage below 60 V. It offers two terminal options: 2 terminals for serial wiring and 4 terminals suitable for parallel, serial, or robotic wiring. Part of a high-efficiency LED system, it delivers up to 166 lm/W overall, with module efficacy reaching 187 lm/W. It provides high-quality light with a CRI above 80 and tight MacAdam 3 color tolerance. Available in multiple color temperatures from 2,700 K to 6,500 K, it ensures uniform illumination even when multiple modules are combined. Quick push terminals and a wide range of lenses and covers simplify installation. Rated for 50,000 hours (L80F10) with a 5-year warranty.  • Ideal for linear and panel lights• SELV module – the single module has a forward voltage < 60 V• Terminals – 2 variants:2 terminals for serial wiring4 termninals for parallel, serial or robot wiring• LED system solution with outstanding system efficacy up to166 lm/W, consisting of linear LED modules and dimmableLED Driver LCA 50W 100–400mA lp PRE• Efficacy of the module up to 187 lm/W• High colour rendering index CRI > 80• Small colour tolerance MacAdam 31• Small luminous flux tolerances• Colour temperatures 2,700 K, 3,000 K, 3,500 K, 4,000 K, 5,000 Kand 6,500 K• Perfectly uniform light, even if several LED modules are usedtogether in a line• Push terminals for quick and simple wiring of LED module toLED module• Broad portfolio from extruded lenses and covers available• Simple installation (e.g. clips or screws)• Long life-time: 50,000 hours (L80F10)• 5-year guarantee

Read more less

Emergency lighting LED driver with DALI-2 interface and automatic test function For self-contained emergency lighting For LED modules with a forward voltage of 10 – 54 V SELV for output voltage < 60 V DC Low profile casing (21 x 30 mm cross-section) For luminaire installation Compatible with Tridonic's LLE FLEX modules (ADV, EXC) EM = Emergency Nominal lifetime up to 100,000 h

Read more less