The Liteplan HRN 3 Conversion Kit is a 3hr emergency lighting conversion kit suitable for 4-36w fluorescent lamps. This unit is to suit multiple 4-pin fluorescent lamp wattages and circuits. 4-pole change over relay plus additional 5th pole for HF ballast isolation. This conversion kit has these additional benefits :- 4-pole changeover relay, Additional 5th pole relay, Deep discharge protection, Low profile enclosure, Constant current charger, High temperature niCd cells. The HRN range is supplied in conversion kit form. They are supplied as standard with the following parts :- 500mm Green charge healthy LED indicator and mounting collar, 3/4/5 Cell kits are supplied with NiCd batteries and AMP irreversible battery connector.
This item is now obsolete, if orderd you will be sent the ELP OM680LP
This is a Lite-Plan LLS/6 emergency inverter module for use with 21-80w lamps. This module should be used with a 6 cell emergency lighting battery.
Technical Specifications
Control Gear Type
Conversion Module
Manufacturer
Lite Plan
Dimming?
Non-Dimmable
Height
20 mm
Input Voltage
220-240 V
Length
292 mm
Max Wattage
80 W
Type
Control Gear
Width
32 mm
Discharge Current
200mA
Compatible Lamp Type
T5
Control Gear Technology
LED
A split pack designed to fit through up to a 60mm aperture of a mains voltage downlight. The unit has been designed to provide full output in emergency mode and will power all loads up to 8W, capable of accepting 230Vdc. All our batteries feature temperature monitoring. In keeping with the latest update to BS EN 61347-2-7 Their associated modules will stop charging the cells if their case temperature falls below 0°C or rises above 55°C. The emergency packs will continue to operate where required, providing their is enough capacity remaining in the battery.
This item is now obsolete, Liteplan have replaced it with the NLP/1-KIT
https://www.easy-controlgear.com/products/nlp-conversion-range?gclid=CjwKCAjwsKqoBhBPEiwALrrqiKgYpSLti7QpU2D7_1IEtRnu428YBvBrBy82bX31NsrEZVAaGkONmBoC-JgQAvD_BwE
This is a Liteplan NED/3 3 cell emergency module for use 2 with 2-20 LEDs in series (6-60v).
LitePlan NED/3 Conversion Module Only from Lite-Plan
Model: NED/3/MOD
Technical Specifications
Control Gear Type
Conversion Module
Accessory Type
Ballast
Manufacturer
Lite Plan
Dimming?
Non-Dimmable
Input Voltage
220-240 V
Length
165 mm
Type
Control Gear
Batteries
4.5Ah NiCd
Batteries
3.6V
Charging Time
24 Hours
IP Rating
IP20
Emergency Duration
3 Hours
Discharge Current
1000mA
Control Gear Technology
Fluorescent
OBSOLETE, Liteplan replacement detailed below
Obsolete, Liteplan has replaced it with the NLP/1S/80-K . This is what you will be sent including the new battery which you have to use. Do not use the existing battery a new one will be supplied as per the below image
LitePlan NED/3/80-K Module Battery and Charge LED Indicator from Lite-Plan
Model: NED/3/80/KIT
The NED/3/80 Kit is a similar product to the NED/3 Kit, with the voltage range extended from 6-60 Volts to 6-80 Volts converting 2 to 30 LED chips in series. Liteplan's NED emergency lighting conversion modules have been specifically designed to convert a wide range of LED types and automatically adjust to the output current to provide the best match between battery and load, ensuring maximum lumination to battery duration. This product has a load current limit of 2A with an average emergency power of 2.6W.
Technical Specifications
Control Gear Type
Conversion Module
Accessory Type
Ballast
Wattage
5W W
Manufacturer
Lite Plan
Dimming?
Non-Dimmable
Length
165 mm
Type
Control Gear
LED Current Limit
320mA
Bat. Current Limit
1100mA
Mains Supply
230-240V AC 50/60 Hz
Charge Current
200mA Nominal
Recharge Period
24 Hours
Compatible Lamp Type
LED
Control Gear Technology
LED
Our range of Nickel Cadmium (NiCd) batteries are offered in various different Voltages, Capacities and Layouts. All batteries are supplied with plugs and leads and where required end caps for panel fixing.
Order Codes
Order Code
Description
3-CD45/S/AS
3.6V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket
3-CD45/P/AS
3.6V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket
3-CD45/PT/AS
3.6V 4.5Ah NiCd Battery Housed in a Poly-carbonate Case With Twin Socket
4-CD45/S/AS
4.8V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket
4-CD45/P/AS
4.8V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket
5-CD45/S/AS
6V 4.5Ah NiCd Battery in a Stick Formation With End Caps and Twin Socket
6-CD45/TS/AS
7.2V 4.5Ah NiCd Battery in a Twin Stick Formation With End Caps and Twin Socket
6-CD45/P/AS
7.2V 4.5Ah NiCd Battery in a Side by Side Formation With Twin Socket
