Tridonic ELA 600x600mm 3800lm 840 ADV2
Edgelit panel for direct recessed mount and surface or suspended mount with accessories
With pre-installed connection cable and integrated plug
For suspended ceiling grid measure of 600, 625 mm and 1,200 x 300 mm
IK rating IK02
Product colour (frame) RAL 9003
Diffusor material standard article: PS, diffusor material TPA article (fullfills the TPA requirements): PS
Lightguide material: PMMA
HE ... High Efficiency, NM ... Nominal Mode, HO ... High Output
Orders only in full carton quantities.
Long lifetime: 50,000 hours
The Tridonic I-SELECT 2 PLUG 400MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001112
The Tridonic LCI 35w 1050mA TEC C LED driver is a fixed output, constant current LED driver with a maximum output power of 35w. These drivers have an average life of 50,000 hours and a 5 year guarantee. The LCI 35w 1050ma TEC has over temperature and overload protection, as well as short circuit and no-load protection. Tridonic article number: 87500198
Non Maintained Emergency LED Module 1w 3H Basic - Tridonic - 89800112
Emergency lighting LED driver for manual testing
For self-contained emergency lighting
Non maintained operation
SELV for output voltage < 60 V DC
Low profile casing (21 x 30 mm cross-section)
EM = Emergency
View Datasheet
Driver LCA 10W 150–400mA one4all SC PRE
premium series
With strain-relief
Product description
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Dimmable built-in constant current LED driver
Can be either used built-in or independent with clip-on strain-relief (see accessory)
Dimming range 1 to 100 %
For luminaires of protection class I and protection class II
Output current adjustable between 150 – 400 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
Max. output power 10 W
Up to 82 % efficiency
Power input on stand-by < 0.2 W
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Interfaces
one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals
Functions
Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2)
Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)
Constant light output function (CLO)
Power-up fading at AC
Configurable via ready2mains
Switch off the driver with fade2zero
Service monitor to log certain events
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
Flexible configuration via DALI, ready2mains and I-SELECT 2
Typical applications
For linear/area lighting in office applications
