Driver LCBI 10W 180/350/500mA PHASE-CUT/1–10V lp advanced series Product description Dimmable built-in constant current LED driver Constant current LED driver Dimmable via leading edge and trailing edge phase dimmers Dimmable via 1 ... 10 V Output dimmed analogue (current amplitude) Dimming range typ. 10 to 100 % (depending on dimmer) For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e SELV Output current 180, 350 or 500 mA Output power 10 W Nominal lifetime up to 50,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Push-in terminals Functions Overload protection Short-circuit protection No-load protection No output current overshoot at mains on/off

Read more less

This is a Tridonic fixed output built-in, constant current LED driver with an output current of 150-400mA. This driver has a max output powr of 65w and an average life of 100,000 hours.

Read more less

Data sheet Product description Constant current LED driver for luminaire installation For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Selectable fixed output current 1,050, 900, 850 and 700 mA Max. output power 56.7 W Up to 88.5 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee (conditions at http://www.tridonic.com)

Read more less

The Tridonic PC 2/55 TCL PRO is a non-dimmable high frequency ballast to run: 2 x 55 Watt long single turn compact fluorescent lamps. Click here to see Data Sheet and Wiring Diagrams! Cheaper Alternative  osram-qtp-optimal-2x54-58-4008321880253

Read more less

This item is obsolete, please co0nsider either of the below as viable alternatives  Alternative 1 Alternative 2   Tridonic Electronic Emergency Lighting Module 230/240v 50/60/Hz HT Nicd 3 Cells

Read more less

1 x28-33w 3hr 3Cell TC-DD Low Output Combo HF Ballast - Tridonic - 89899943 / 89899943 Tridonic 89899980 PC1X28-33LOEDD Emergency Combo for CFL   Combination electronic ballast and emergency lighting unit. For use with TC-DD compact fluorescent lamps. 3 hour rated duration, short circuit proof battery connection. NiCd batteries, separate battery pack with high temperature cells.    Volts: 240 v Length: 123 mm Width: 31 mm Diameter: 31 mm Bulb/Lamp Type: Ballast Height: 79 mm Technology: Compact Fluorescent

Read more less

NiCd Accus 4.5 Ah Nickel-Cadmium cells (NiCd) Fig. 1: Stick; Connection: blade terminal Product description High-temperature NiCd cells for use with emergency lighting units 4 year design life 1 year guarantee from delivery date Properties Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet) Good charging properties at high temperature High energy maintenance of the charged battery Certified quality manufacturer In various configurations Simple connection with blade terminal respectively plug terminal With polycarbonate fixing caps and connecting cable Electrical connection with mounted end caps possible Suitable for emergency lighting equipment as per IEC 60598-2-22

Read more less

Product description Independent driver with strain-relief housing Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids) Temperature protection as per EN 61347-2-13 C5e Output current 350 mA Max. output power 10 W BIS approval mark for art. no.: 87500802, 87500804. Nominal lifetime up to 50,000 h Replacement  for the 87500240 and 87500581        

Read more less

Electronic ballast with highest possible energy class CELMA EEI A2 BAT. It offers large temperature range, intelligent voltage guard, precise lamp operation using adjustment of lamp parameters, advanced SMART-Heating for minimum 50000 starts without replacement of lamps, constant luminous flux irrespective of fluctuations in mains voltage, designed for THD <10%, for luminaires of protection class I and protection class II. It features automatic start after replacement of defective lamps, safety shutdown of defective lamps and at end of lamp life (EOL 2), insulation displacement connection (IDC) terminal for rapid automatic or manual wiring and for emergency lighting systems as per EN 50172. · Rated lifespan: 100,000 hours · Flicker free warm start · Min/Max ambient working temperature: -25°C to 70°C · Degree of protection: IP20 · Operating voltage: 198-264V (AC), 176-280V (DC)

Read more less

Tridonic 350mA I-SELECT 2 PLUG Blue from Tridonic Model: 28001110 This Tridonic resistor is a ready-to-use body used to set the output current value to 350mA in LED driver series PRE and EXC featuring the I-SELECT 2 interface (this resistor is not compatible with any driver with the I-SELECT generation 1 interface). When using this resistor at a value beyond the specified range the output current will be set to the minimum value (respective to when the resistor value is too large). Technical Specifications Accessory Type Plug Wattage 0.25 W Manufacturer Tridonic Dimming? Dimmable Depth 4 mm Length 21 mm Type Accessory Width 5 mm Resistor Power 0.25W

Read more less

Driver LC 38W 250-350mA flexC lp ADV advanced series non-SELV Product description LED Constant current LED driver for luminaire installation New version DC operating with EL marking For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Output current adjustable between 250 – 350 mA Max. output power 38 W Up to 88.5 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces Terminal blocks: 45° push terminals Functions Overload protection Short-circuit protection No-load protection Burst protection voltage 1 kV Surge protection voltage 1 kV (L to N) Surge protection voltage 2 kV (L/N to earth) Typical applications For linear/area lighting in office applications

Read more less

Driver LCA 100W 24V one4all SC PRE premium series 24 V – dimmable (IP20) With strain-relief Product description NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance) Dimmable 24 V constant voltage LED driver for flexible constant voltage strips Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards) One4all interface and ready2mains enable different dimming options Dimming range 1 to 100 % No additional external dimmer is needed Suitable for emergency escape lighting systems acc. to EN 50172 Nominal lifetime up to 50,000 h 5 years guarantee Typical applications Cove lighting, facade accent lighting, ceiling integration Technical details 24 V, 100 W Small design (295 x 43 x 30 mm) with stretched-compact strain relief Small cross section Push terminals for simple wiring Output terminals (+/–) equipped twice for more flexibility in the application Interfaces one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 45° push terminals System solution Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m In connection with Flex accessories wire to PCB plug Test the function of third party light sources before use at low dimming levels to ensure the dimming function works perfectly

Read more less