Tridonic Choke for 150W Metal Halides and Sons

Read more less

NiMH Battery pack 2.2 – 4.0 Ah Nickel-Metal Hydride cells (NiMH) Battery pack 2.2 Ah Battery pack 4.0 Ah Battery pack 2.2 Ah Battery pack 4.0 Ah Product description High-temperature NiMH battery pack for use with emergency lighting units 4 year design life 1 year guarantee from delivery date Properties Constant high-temperature operation Temperature depending on the used emergency lighting unit (refer to respective emergency control gear data sheet) Good charging properties at high temperature High energy maintenance of the charged battery Certified quality manufacturer Casing material made of polycarbonate 1.0 mm² stranded wire Suitable for emergency lighting equipment as per IEC 60598-2-22   Data sheet  

Read more less

2X35/49w T5 Excel ONE4ALL - Tridonic - 22185106

Read more less

15W Choke obsolete , you will be sent an 18W variant as an alternative  

Read more less

I-SELECT 2 PLUG PRE / EXC Resistors for current selection Product description Ready-for-use resistor to set output current value Compatible with LED driver featuring I-select 2 interface; not compatible with I-SELECT (generation 1) Resistor is base insulated Resistor power 0.25 W Current tolerance ± 2 % additional to output current tolerance Compatible with LED driver series PRE and EXC Example of calculation R [kΩ] = 5 V / I_out [mA] x 1000 E96 resistor value used Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W; base insulation necessary When using a resistor value beyond the specified range, the output current will automatically be set to the minimum value (resistor value too big), respectively to the maximum value (resistor value too small)

Read more less

Product description Two-colour status display LED Green: system OK, red: fault Plug connection

Read more less

Electronic ballast with highest possible energy class CELMA EEI A2 BAT. It offers large temperature range, intelligent voltage guard, precise lamp operation using adjustment of lamp parameters, advanced SMART-Heating for minimum 50000 starts without replacement of lamps, constant luminous flux irrespective of fluctuations in mains voltage, designed for THD <10%, for luminaires of protection class I and protection class II. It features automatic start after replacement of defective lamps, safety shutdown of defective lamps and at end of lamp life (EOL 2), insulation displacement connection (IDC) terminal for rapid automatic or manual wiring and for emergency lighting systems as per EN 50172. · Rated lifespan: 100,000 hours · Flicker free warm start · Min/Max ambient working temperature: -25°C to 70°C · Degree of protection: IP20 · Operating voltage: 198-264V (AC), 176-280V (DC)

Read more less

The Tridonic I-SELECT 2 PLUG 500MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001114

Read more less

Product description Independent fixed output LED driver For luminaires of protection class II For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711 Temperature protection as per EN 61347-2-13 C5e Selectable fixed output current via DIP switch 700, 750, 800 and 850 mA (pre-selected current 700 mA) Max. output power 35.7 W Up to 90.5 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee

Read more less

this item is now obsolete you will be sent a  What you will be sent if you order this product code    1 x 18-24w HF Compact Ballast Slimline - Tridonic - 2217600 - PC 1x18-24 W BASIC sl

Read more less

1x4-13w T5/TC Basic Ballast - Tridonic - 24138831 - PC 1x4-13W Basic

Read more less

Driver LC 10W 350mA fixC lp SNC2 Linear drivers Data sheet Product description Fixed output built-in LED driver Constant current LED driver For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Output current 350 mA Max. output power 10.2 W Up to 80 % efficiency Nominal lifetime up to 50,000 h 5 years guarantee (conditions at www.tridonic.com)

Read more less