Please select formation
NiCd Accus 4.0 Ah
Nickel-Cadmium cells (NiCd)
Fig. 1: Stick; Connection: blade terminal
Fig. 2: Stick + Stick; Connection: blade terminal
Fig. 1: stick
Fig. 2: stick + stick
Product description
High-temperature NiCd cells for use with emergency lighting units
4 year design life
1 year guarantee from delivery date
Properties
Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet)
Good charging properties at high temperature
High energy maintenance of the charged battery
Certified quality manufacturer
In various configurations
Simple connection with blade terminal
With polycarbonate fixing caps and connecting cable
Electrical connection with mounted end caps possible
Suitable for emergency lighting equipment as per IEC 60598-2-22
Product description
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Dimmable built-in constant current LED driver
Dimming range 1 to 100 %
For luminaires of protection class I and protection class II
Output current adjustable between 350 – 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
Max. output power 75 W
Up to 92 % efficiency
Power input on stand-by < 0.16 W
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Low profile metal casing with white cover
Type of protection IP20
Interfaces
one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 0° push terminals
Functions
Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2)
Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)
Constant light output function (CLO)
Power-up fading at AC
Configurable via ready2mains
Switch off the driver with fade2zero
Service monitor to log certain events
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Intelligent Voltage Guard (overvoltage and undervoltage monitoring)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Flexible configuration via companionSUITE
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
Flexible configuration via DALI, ready2mains and I-SELECT 2
Reliability proven by lifetime up to 100,000 h and 5 years guarantee
Typical applications
For linear/area lighting in office applications
Tridonic PC258T8TOP Electronic Ballast 220/240v 50/60/0Hz to run 2x58w T8 Tubes - PC 2/58 T8 TOP
This is obsolete , a Philips variant will be sent instead
https://www.easy-controlgear.com/products/philips-hfp258tldiii-ph-hf-p-2x58-tl-d-iii-220-240v-50-60hz-id?_pos=1&_sid=6add9a2d9&_ss=r
EM powerLED SELFTEST 1 – 2 W
Combined emergency lighting LED driver 1 – 4 W
Screw-fix
Clip-fix
Screw-fix
Clip-fix
Product description
Emergency lighting LED driver with selftest function
For self-contained emergency lighting
SELV for output voltage < 60 V DC
Low profile casing (21 x 30 mm)
5 years guarantee
Properties
Mains and emergency operation
Self-test as per IEC 62034
Constant current mode
With either screw or clip fastening (clip-fix)
1, 2 or 3 h rated duration
Selectable operating time (jumper)
Output power limitation
Two-colour status display LED
“Rest mode” function
Simple set-up
Automatic restart after LED replacement
Electronic multi-level charge system
SELV classified (outputs powerLED, battery, status LED, test switch)
Polarity reversal protection for battery
Deep discharge protection
Very low energy consumption from the battery after activation of the deep discharge protection
Short-circuit-proof battery connection
Emergency lighting LEDs available
Self-test:
Status of the battery
Status of the LED
Charge condition
Function test
Duration test
Batteries
High-temperature cells 2 Ah
NiMH batteries
Cs cells
4 year design life
1 year guarantee
For battery compatibility refer to data sheet
Picture for illustrative purposes only
Driver LCO 165W 200–1050mA 285V one4all NFC C EXC3
excite NFC outdoor series
Product description
Dimmable built-in constant current LED driver
Dimming range 5 – 100 % (min. 10 mA)
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current adjustable between 200 – 1,050 mA via NFC, DALI or ready2mains Programmer
Max. output power 165 W
Up to 93 % efficiency
Lowest power input on stand-by < 0.16 W
Nominal lifetime of 100,000 h and 8 years guarantee
Interfaces
Near field communication (NFC)
one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration via mains)
U6Me2 (configuration of chronoSTEP 2 via mains)
Terminal blocks: 45° / 0° push terminals
Functions
Adjustable output current in 1-mA-steps (NFC, DALI, ready2mains)
Programmable chronoSTEP: times and levels (NFC, DALI, U6Me2, ready2mains)
Dimming through mains voltage (inputDIM)
Enhanced constant light output function (eCLO)
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Configurable external temperature management (ETM)
Intelligent Temperature Guard (ITG)
Intelligent Voltage Guard Plus (IVG+)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Flexible configuration via companionSUITE (NFC, DALI, ready2mains™) or U6Me2 programmer
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
In-field programming possible after installation with NFC interface and ready2mains
High overvoltage protection: up to 10 kV asymmetric (protection class I and II)
Typical applications
Road, street and industry
Product description
Fits in most existing MR16 / GU10 halogen luminaires
10 W LED Equivalent to 50 W MR16 halogen with higher lumen output
Perfect solution for MR16 / GU10 replacement project
Module with integrated electronic, heatsink and optics
Compatible with leading and trailing edge phase cut dimmers
Dimming range 0.1 to 100 % (depends on dimmer)
Eye-catching lens optic with mirrors halogen facettes
Long lifetime: L70B50 >50,000 h at tp = 75 °C
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
Please note this item is now obsolete , you will be sent a Philips alternative which is exactly the same size with the same terminals
This is the Tridonic PC 2/58 T8 Pro, a non-dimmable high frequency ballast to run 2 x 58w T8 fluorescent tube or 2 x 55w TC-L lamp.These ballasts have a nominal life time of up to 100,000 hours and provide a constant luminous flux even with fluctuations in mains voltage.Tridonic T8 Pro ballasts also have an automatic start after replacement of defective lamps and a safety shutdown of defective lamps at the end of a lamps life.
