Driver LC 38W 400-700mA flexC lp SNC4 Linear drivers Data sheet Product description Constant current LED driver for luminaire installation For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Selectable fixed output current 700, 600, 500 and 400 mA Max. output power 37.8 W Up to 86.5 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee (conditions at www.tridonic.com)

Read more less

Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED Driver Dimming range 1 to 100 % For luminaires of protection class I and protection class II Output current adjustable between 350 – 1,050 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI Max. output power 50 W Up to 91 % efficiency Power input on stand-by < 0.15 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° push terminals Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the Driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Intelligent Voltage Guard (overvoltage and undervoltage monitoring) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Flexible configuration via companionSUITE Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 Reliability proven by lifetime up to 100,000 h and 5 years guarantee Typical applications For linear/area lighting in office applications

Read more less

Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED Driver Dimming range 1 to 100 % For luminaires of protection class I and protection class II Output current adjustable between 150 – 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI Max. output power 35 W Up to 88 % efficiency Power input on stand-by < 0.2 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° push terminals Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the Driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Intelligent Voltage Guard (overvoltage and undervoltage monitoring) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Flexible configuration via companionSUITE Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 Reliability proven by lifetime up to 100,000 h and 5 years guarantee Typical applications For linear/area lighting in office applications

Read more less

Driver LC 20W 100-1050mA 44V o4a NF SR EXC3 excite series Product description Independent constant current LED driver Dimmable via DALI-2 Dimming range 1 to 100 % (min. 5 mA) Output current adjustable between 100 – 1,050 mA with DALI or NFC Max. output power 20 W Up to 85 % efficiency Power input on stand-by < 0.4 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Toolless mounting of strain relief Interfaces Near field communication (NFC) one4all (DALI-2 DT 6, switchDIM, corridorFUNCTION V2) Functions Adjustable output current in 1-mA-steps (NFC, DALI-2) Constant light output function (CLO) Protective features (overtemperature, short-circuit, overload, no-load) Surge protection voltage 1 kV (L – N) Suitable for emergency escape lighting systems acc. to EN 50172 For cable cross-sections up to 2.5 mm² Benefits Flexible configuration via companionSUITE (NFC, DALI-2) Application-oriented operating window for maximum compatibility New strain relief concept – fast mounting and pre-assembled connection of the LED load possible Typical applications For applications in downlight and decorative luminaires

Read more less

Please note this item is now obsolete , you will be sent a Philips alternative which is exactly the  same size with the same terminals  This is the Tridonic PC 2/58 T8 Pro, a non-dimmable high frequency ballast to run 2 x 58w T8 fluorescent tube or 2 x 55w TC-L lamp.These ballasts have a nominal life time of up to 100,000 hours and provide a constant luminous flux even with fluctuations in mains voltage.Tridonic T8 Pro ballasts also have an automatic start after replacement of defective lamps and a safety shutdown of defective lamps at the end of a lamps life.  

Read more less

Tridonic 28003603 LC 60/150-550/230 o4a NF h16 EXC4   Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED driver Dimming range 1 to 100 % (min. 5.5 mA) For luminaires of protection class I and protection class II Adjustable output current between 150 and 550 mA Max. output power 60 W Up to 94 % efficiency Power input on stand-by < 0.14 W Nominal lifetime up to 100,000 h 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions)

Read more less

89899756 LED EM Green UHB Emergency lighting accessories Status indication green LED EM Product description_ A green LED indicates that charging current is flowing into the battery

Read more less

89800702   EMpowerLED BASIC FX 202 LiFePO4 2W SCREW EM LED drivers Product description_ Self contained emergency lighting LED driver for manual testing_ Non-maintained and maintained operation_ For luminaire installation_ EM = Emergency_ Nominal lifetime up to 100,000 h_ 5 years guarantee (conditions athttps://www.tridonic.com/en/int/services/manufacturerguarantee-conditions)Functions_ 1 or 3 h rated duration depending on connected battery_ For 1 or 2 LEDs connected in series_ Automatic detection of connected LED load_ Switched live for switching the LED outputBattery management_ Intelligent charge system_ Deep discharge protection_ Temperature protection_ Polarity reversal protection for battery provided by 3-poleconnectorBatteries_ LiFePO4 batteries with Tridonic LiFeGuard_ Temperature-protected_ Overcharge-/Overdischarge protection_ Ensures safety in use_ LiFePO4: up to 12 years design life_ 8 years guarantee for LiFePO4 batteries (conditions athttps://www.tridonic.com/en/int/services/manufacturerguarantee-conditions) 1_ For battery compatibility refer to data sheet, battery selection1 28005859 - 5 Jahre Garantie. 28006323 - 4 Jahre Garantie.LiFeGuardWebsitehttp://www.tridonic.com/89800701

Read more less

Tridonic PCA 2/40 TCL ECO 22085538 

Read more less

Tridonic 28001044 LCU 48V 150W DC-STR DIM SR

Read more less

The most important features at a glance: - Energy efficiency class A2 BAT - Service life of up to 100,000 h - Intelligent Voltage Guard (overvoltage display and undervoltage shutdown) - Precise lamp operation by adjusting the lamp parameters - Advanced SMART heating for at least 50,000 starts without changing the lamp - Constant luminous flux regardless of mains voltage fluctuations - For lights of protection class I + II - Automatic restart after lamp replacement - Safety shutdown of defective lamps and at the end of lamp life - Insulation displacement terminals (IDC) for fast automatic and manual wiring - For emergency lighting systems in accordance with EN 50172

Read more less

Accu - NiMH 4Ah 3A CON Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet) Low profile cross-section 21 mm Good charging properties at high temperature High energy maintenance of the charged battery Certified quality manufacturer In various configurations Simple connection with plug-in system

Read more less