The Tridonic I-SELECT 2 PLUG 700MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001118

Read more less

Product description Independent constant current LED driver Dimmable via DALI-2 Dimming range 1 to 100 % (min. 5 mA) Output current adjustable between 450 – 1,050 mA with DALI or NFC Max. output power 45 W Up to 88 % efficiency Power input on stand-by < 0.5 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Strain relief with loop through function Interfaces Near field communication (NFC) one4all (DALI-2 DT 6, switchDIM, corridorFUNCTION V2) Functions Adjustable output current in 1-mA-steps (NFC, DALI-2) Constant light output function (CLO) Protective features (overtemperature, short-circuit, overload, no-load) Surge protection voltage 1 kV (L – N) Suitable for emergency escape lighting systems acc. to EN 50172 For cable cross-sections up to 2.5 mm² Benefits Flexible configuration via companionSUITE (NFC, DALI-2) Application-oriented operating window for maximum compatibility Typical applications For applications in downlight and decorative luminaires

Read more less

Tridonic 350mA I-SELECT 2 PLUG Blue from Tridonic Model: 28001110 This Tridonic resistor is a ready-to-use body used to set the output current value to 350mA in LED driver series PRE and EXC featuring the I-SELECT 2 interface (this resistor is not compatible with any driver with the I-SELECT generation 1 interface). When using this resistor at a value beyond the specified range the output current will be set to the minimum value (respective to when the resistor value is too large). Technical Specifications Accessory Type Plug Wattage 0.25 W Manufacturer Tridonic Dimming? Dimmable Depth 4 mm Length 21 mm Type Accessory Width 5 mm Resistor Power 0.25W

Read more less

Pictured with Strain relief ( separate product  )  https://www.easy-controlgear.com/products/strain-relief-set-43x30mm-280001168 Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Dimmable built-in constant current LED driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Dimming range 1 to 100 % For luminaires of protection class I and protection class II Output current adjustable between 250 – 700 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI Max. output power 17 W Up to 86 % efficiency Power input on stand-by < 0.2 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 45° push terminals Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 Typical applications For linear/area lighting in office applications

Read more less

Tridonic PC3418T8PRO Electronic Ballast 240/250v 50/60/0Hz to run 3-4x18w T8 Tubes - PC 3-4/18 T8PRO

Read more less

   The Tridonic PC 1x36 T8 TOP is a non-dimmable high-frequency ballast to run: 1 x 36 Watt 4ft T8 fluorescent tubes. Tridonic article number 22185223. Tridonic PC 1x36 T8 Top ballasts have an average life of 50,000 hours and 30,000 starts before lamp failure. Efficiency index is A2 and the overall weight of this HF ballast is 0.148kg. Not for use in switch start CCG type fittings with an external starter.

Read more less

Obsolete, please use the below as a viable alternative. This is what you will be sent .      Alternative  The Tridonic PC 1x18-24 W Basic (Linear) is a basic non-dimmable high frequency ballast to run: 1 x 24 Watt T5 Fluorescent tube OR 1 x 18 Watt T8 Fluorescent tube OR 1 x 22 Watt T5 circular fluorescent tube OR 1 x 18 Watt F shaped compact fluorescent 1 x 24 Watt F shaped compact fluorescent OR 1 x 18 Watt long single turn compact fluorescent 1 x 24 Watt long single turn compact fluorescent Tridonic 22176001!

Read more less

  28004432 LC 100W 24V one4all NF SC EXC2

Read more less

89800637  EMconverterLED PRO 203 MH/LiFePO4 250V   Product description Emergency lighting LED driver with DALI-2 interface and automatic test function For self-contained emergency lighting For LED modules with a forward voltage of 50 – 250 V Low profile casing (21 x 30 mm cross-section) For luminaire installation EM = Emergency Nominal lifetime up to 100,000 h 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions)  

Read more less

87500853 LC 35W 24V SC SNC SP      

Read more less

89899859 EMpowerLED 2W BASIC SCREW-FIX EM LED drivers Product description Emergency lighting LED driver for manual testing For self-contained emergency lighting SELV for output voltage < 60 V DC Low profile casing (21 x 30 mm cross-section) EM = Emergency 5 years guarantee (conditions at https://www.tridonic.com/en/int/services/manufacturer-guarantee-conditions)

Read more less