OBSOLETE , IF using DALI dimming the below will suffice
DALI Alternative
If using DSI no alternative available
Tridonic Electronic compact dimming ballast to run 1 x 26-57w TC Compact
The Tridonic PCA 1x26-57 TC ECO xitec II is a high frequency dimmable ballast for use with DALI/DSI/switchDIM interfaces.
Compatible with the following lamps:
1 x 40w T5 Circular Lamp
1 x 26w Double Turn Compact Fluorescent Lamp
1 x 26w Triple Turn Compact Fluorescent Lamp
1 x 40w Long Single Turn Compact Fluorescent Lamp
1 x 40w T5 Circular Fluorescent Lamp
1 x 32w Triple Compact Fluorescent Lamp
1 x 42w Triple Turn Compact Fluorescent Lamp
1 x 57w Triple Turn Compact Fluorescent Lamp
Tridonic part number: 22185120
Product description
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Dimmable built-in constant current LED Driver
Dimming range 1 to 100 %
For luminaires of protection class I and protection class II
Output current adjustable between 900 – 1,750 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
Max. output power 60 W
Up to 90 % efficiency
Power input on stand-by < 0.2 W
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Interfaces
one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals
Functions
Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2)
Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)
Constant light output function (CLO)
Power-up fading at AC
Configurable via ready2mains
Switch off the Driver with fade2zero
Service monitor to log certain events
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
Flexible configuration via DALI, ready2mains and I-SELECT 2
Reliability proven by lifetime up to 100,000 h and 5 years guarantee
Typical applications
For linear/area lighting in office applications
Driver LCA 60W 24V one4all SC PRE
premium series 24 V – dimmable (IP20)
With strain-relief
Product description
NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
One4all interface and ready2mains enable different dimming options
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal lifetime up to 50,000 h
5 years guarantee
Typical applications
Cove lighting, facade accent lighting, ceiling integration
Technical details
24 V, 60 W
Small design (225 x 43 x 30.2 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
Output terminals (+/–) equipped twice for more flexibility in the application
Interfaces
one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals
System solution
Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
In connection with Flex accessories wire to PCB plug
The functioning of third party light sources at a low dim level cannot be guaranteed and is not recommended
Data sheet
Replaces the 28000411/87500852
Product description
Constant voltage LED driver
Output voltage 24 V
Max. output power 35 W
Dimmable via external PWM LED dimmers attached on output side
For luminaires of protection class I and protection class II
The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging
Nominal lifetime up to 50,000 h
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
Driver LC 50/60W 1200/700/1400mA fixC C SNC
essence series
Product description
Fixed output built-in LED driver
Constant current LED driver
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
KC certificate for LC 60W 1400mA fixC C SNC
Output current 1,200, 700 or 1,400 mA
Max. output power 50 or 60 W
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Functions
Overtemperature protection
Overload protection
Short-circuit protection
No-load protection
Driver LC 15W 300/350mA fixC SR SNC2
Compact drivers
Data sheet
Product description
Independent driver with strain-relief housing
Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
Temperature protection as per EN 61347-2-13 C5e
Output current 300 or 350 mA
Max. output power 15 W
Nominal lifetime up to 50,000 h
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
Driver LC 60W 24V bDW SC PRE2
premium series 24 V – dimmable (IP20)
With strain-relief
Product description
NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging.
basicDIM Wireless enables different dimming options
Forms automatically a wireless communication network with up to 250 nodes
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal lifetime up to 50,000 h
5 years guarantee
Typical applications
Cove lighting, facade accent lighting, ceiling integration
Technical details
24 V, 60 W
Small design (225 x 43 x 30.2 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
Output terminals (+/–) equipped twice for more flexibility in the application
Interfaces
basicDIM Wireless
ready2mains (configuration via mains)
Terminal blocks: 45° push terminals
System solution
Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
In connection with Flex accessories wire to PCB plug
Test the function of third party light sources before use at low dimming levels to ensure the dimming function works perfectly
Data sheet
Product description
Sensor developed to work with the latest DALI specification
Monitoring of ambient light and motion detection
Remote control interface allowing infrared remote control interaction
Individual adjustment of the parameters with configuration software
Power supply via DALI line
Shutter for preventing movement detection in one direction included
Small dimensions allowing easy and inconspicuous integration in luminaries
Wide range of accessories allowing extended application range
5 years guarantee
Housing properties
Casing: polycarbonat, black or white
Type of protection IP20
Note
Tridonic MSensor G3 family sensors are developed according to DALI Standard EN 62386-101 Ed.2, also known as DALI-2. To be able to use the sensor in such installation, an application controller is necessary.
List of approved application controller can be found on our WEB page in 28002386
