Driver LC 35W 800mA fixC SR SNC2
essence series
Product description
Independent driver with strain-relief housing
For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
Temperature protection as per EN 61347-2-13 C5e
Output current 800 mA
Max. output power 35 W
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Push-in terminals
2 separate strain relief parts for input and output cables with highly robust clamps
Functions
Overload protection
Short-circuit protection
No-load protection
No output current overshoot at mains on/off
Burst protection voltage 1 kV
Surge protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Typical applications
For spot light and downlight in retail and hospitality applications
For panel light and area light in office and education application
Tridonic Combined Electronic ballast to run 3/4 x 14w T5 Combo (3h 3 Cell)
89800002
Rated supply voltage 220 – 240 VMains frequency 50 / 60 HzMains voltage changeover threshold according to EN 60598-2-22tc point max. 70 °CAmbient temperature ta 0 ... 50 °COperating frequency > 30 kHzBattery charging time 24 hCharge current 210 mADischarge current 1 h 2.4 ADischarge current 3 h 1.1 AMin. lamp starting temperature (normaloperation)-15 °CMin. lamp starting temperature (emergency mode)0 °CType of protection IP20
Driver LCA 150W 24V one4all SC PRE
premium series 24 V – dimmable (IP20)
With strain-relief
Product description
NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
One4all interface and ready2mains enable different dimming options
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal lifetime up to 50,000 h
5 years guarantee
Typical applications
Cove lighting, facade accent lighting, ceiling integration
Technical details
24 V, 150 W
Small design (325 x 43 x 30 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
Output terminals (+/–) equipped twice for more flexibility in the application
Interfaces
one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals
System solution
Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
In connection with Flex accessories wire to PCB plug
The functioning of third party light sources at a low dim level cannot be guaranteed and is not recommended
Product description
Ideal for linear and panel lights
2 terminals for serial wiring
Perfectly uniform light, even if several LED modules are used together in a line
Push terminals for quick and simple wiring of LED module to LED module
Broad portfolio from extruded lenses and covers available
HE ... High Efficiency, NM ... Nominal Mode, HO ... High Output
Min. order quantity LLE 24x70mm QTY4: 30 pcs. The LLE 24x70mm QTY4 module contains 4 single 24x70mm modules which have to be separated.
Long lifetime up to 72,000 hours
5 years guarantee (conditions at
Power supplies
Data sheet
Product description
For supplying 200 mA for DALI devices or control modules without their own power supplies
Surface-mounted casing
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
This item is Obsolete the nearest alternative is the below
Alternative
Tridonic 89800393 EM PowLED HP Basic FX 80W LED Driver
Tridonic 89800393 EM powLED HP BASIC FX 104 LP 80W 200V Linear LED Driver - High power emergency unit for linear LED lighting systems.Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION.Emergency lighting function for use with single batteries for manual testing.Please see attached spec sheet for more information.
Colours:
As Per Picture
Volts:
200-250 v
Watts:
80 w
Length:
360 mm
Bulb/Lamp Type:
LED Driver
Size:
360 x 30 x 21
Height:
21 mm
Width:
30 mm
Weight:
275g
Obsolete, If you are using the dali dimming feature please order the EL2X80IDIM , please note this is dali dimming only and not DSI dimming
Product description
Processor-controlled ballast with xitec II inside
Highest possible energy class CELMA EEI = A1 BAT (1)
Noise-free precise control via DALI or DSI signal, switchDIM or corridorFUNCTION
Nominal lifetime up to 100,000 h (at ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h)
Multilamp management
OEM-specific reserved memory areas
5 years guarantee
Interfaces
DALI
DSI
switchDIM (with memory function + selectable dimming rate)
corridorFUNCTION (3 preprogrammed profiles)
Integrated SMART interface for function with SMART Sensor 5D 19f and corridorFUNCTION plugs
Functions
Intelligent Temperature Guard (overtemperature protection)
Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown)
Optimum filament heating in any dimmer setting
Disconnection of filament heating from a dimming level of approx. 90 % for maximum energy efficiency (SMART-Heating concept)
corridorFUNCTION with ambient light control
Automatically triggered emergency lighting value in DC mode, 15 %
For emergency lighting systems as per EN 50172
Automatic start after replacement of defective lamps
Automatic shutdown if the lamp is faulty
