Product description
Ideal for linear and panel lights
2 terminals for serial wiring
Perfectly uniform light, even if several LED modules are used together in a line
Push terminals for quick and simple wiring of LED module to LED module
Option backside terminal
Broad portfolio from extruded lenses and covers available
Long lifetime up to 72,000 hours
This item is Obsolete the nearest alternative is the below
Alternative
Tridonic 89800393 EM PowLED HP Basic FX 80W LED Driver
Tridonic 89800393 EM powLED HP BASIC FX 104 LP 80W 200V Linear LED Driver - High power emergency unit for linear LED lighting systems.Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION.Emergency lighting function for use with single batteries for manual testing.Please see attached spec sheet for more information.
Colours:
As Per Picture
Volts:
200-250 v
Watts:
80 w
Length:
360 mm
Bulb/Lamp Type:
LED Driver
Size:
360 x 30 x 21
Height:
21 mm
Width:
30 mm
Weight:
275g
Please note this item is obsolete, If you are using dali dimming please use the ALTERNATIVE
If you are using DSI dimming then please do not order as we aare unable to supply
Digital Dimming Ballast to run 2 X 28/54w T5 tubes - PCA 2x28/54 T5 ECO - 22185100
Product description
Processor-controlled ballast with xitec II inside
Highest possible energy class CELMA EEI = A1 BAT (1)
Noise-free precise control via DALI or DSI signal, switchDIM or corridorFUNCTION
Nominal lifetime up to 100,000 h (at ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h)
Multilamp management
OEM-specific reserved memory areas
5 years guarantee
Interfaces
DALI
DSI
switchDIM (with memory function + selectable dimming rate)
corridorFUNCTION (3 preprogrammed profiles)
Integrated SMART interface for function with SMART Sensor 5D 19f and corridorFUNCTION plugs
Functions
Intelligent Temperature Guard (overtemperature protection)
Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown)
Optimum filament heating in any dimmer setting
Disconnection of filament heating from a dimming level of approx. 90 % for maximum energy efficiency (SMART-Heating concept)
corridorFUNCTION with ambient light control
Automatically triggered emergency lighting value in DC mode, 15 %
For emergency lighting systems as per EN 50172
Automatic start after replacement of defective lamps
Automatic shutdown if the lamp is faulty
22185100
Driver LC 25W 350–1050mA flexC SC EXC
excite series
With strain-relief
Product description
Constant current LED driver
Can be either used built-in or independent with clip-on strain-relief (see accessory)
Adjustable output current between 350 and 1,050 mA via ready2mains Programmer or I-SELECT 2 plugs
Max. output power 25 W
Up to 86 % efficiency
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Interfaces
ready2mains (configuration via mains)
Terminal blocks: 45° push terminals
Functions
Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to high efficiency
Flexible configuration via ready2mains and I-SELECT 2
Typical applications
For downlight, spotlight and decorative applications
Data sheet
BALLAST
TECHNICAL DATA
Type
OGLI 1000W ST 120 380-415/50 100/50%
Ballast for HI lamps
OGLI 1000W ST 120 380-415/50 100/50% Ord. No. 20881172 - 11034
Capacitor required : CA15MFD-480-mt
Stanadards Directeives Declarations Approvals
EN 60923, EN 61347 RoHS - 2011/65/EU CE
-
Lamp
Type
HI 1000W 4,4A
Network (line voltage)
V / Hz
380; 400; 415 / 50
Current
A
4,4
Losses - warm
W
41,8
cosfin
-
0,57
h
%
-
tw/D tn
Thermal protection
K
130/ 70
No
L
mm
174
D1
mm
160
Weight
Kg
7,75
Packing
Pcs./Carton
3
Packing
Pcs./Pallet
108
Impregnation
Vacuum impregnated with polyester resin
Elkosun d.o.o. Tržaška cesta 23
SI -2000 Maribor www.elkosun.com
TD 11034
Date: 6. 06. 2016
Page 1
This item is now obsolete, we will send out the below as a viable alternative
Alternative
Product Details
High frequency digital ballast in a compact matchbox form factor for single lamp operation. Automatic start after replacement of defective lamps. Safety shutdown of defective lamps and at end of lamp life.
· Suitable for single lamp operation
· Runs 28w TC-DD, 26w TC-D and TC-T lamps
· 5 year guarantee
· IP20
· 50,000hr life
Technical Specifications
Control Gear Type
High Frequency
Accessory Type
Ballast
Wattage
26 W
Wattage
26 W
Manufacturer
Tridonic
Dimming?
Non-Dimmable
No. Of Lamps
Single (1x)
Depth
21 mm
Length
145 mm
Type
Control Gear
Voltage
220-240 Volt
Width
22 mm
Compatible Lamp Type
T5C
Compatible Lamp Type
PLT (4 Pin)
Compatible Lamp Type
T5
Compatible Lamp Type
T8
Compatible Lamp Type
2D (4 Pin)
Control Gear Technology
Fluorescent
Manufacturers Part Number
22176002
Manufacturers Part Number
PC Basic 1x26SL
Manufacturers Part Number
22176002
basicDIM Wireless User Interface
Casambi Ready wireless user interface
Casambi Express Black
Casambi Express White
Product description
Battery powered, wireless wall switch
Forms automatically a wireless communication network with up to 250 nodes (1)
Controls all types of basicDIM Wireless devices
4 scenes
Dim up / down
Colour temperature control
5 years guarantee
(1)Depends on production number, see data sheet basicDIM Wireless User Interface.
Data sheet
Product description
Fits in most existing MR16 / GU10 halogen luminaires
10 W LED Equivalent to 50 W MR16 halogen with higher lumen output
Perfect solution for MR16 / GU10 replacement project
Module with integrated electronic, heatsink and optics
Compatible with leading and trailing edge phase cut dimmers
Dimming range 0.1 to 100 % (depends on dimmer)
Eye-catching lens optic with mirrors halogen facettes
Long lifetime: L70B50 >50,000 h at tp = 75 °C
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
This item is now obsolete, we will send out the below as a viable alternative
Alternative
Product Details
High frequency digital ballast in a compact matchbox form factor for single lamp operation. Automatic start after replacement of defective lamps. Safety shutdown of defective lamps and at end of lamp life.
· Suitable for single lamp operation
· Runs 28w TC-DD, 26w TC-D and TC-T lamps
· 5 year guarantee
· IP20
· 50,000hr life
Technical Specifications
Control Gear Type
High Frequency
Accessory Type
Ballast
Wattage
26 W
Wattage
26 W
Manufacturer
Tridonic
Dimming?
Non-Dimmable
No. Of Lamps
Single (1x)
Depth
21 mm
Length
145 mm
Type
Control Gear
Voltage
220-240 Volt
Width
22 mm
Compatible Lamp Type
T5C
Compatible Lamp Type
PLT (4 Pin)
Compatible Lamp Type
T5
Compatible Lamp Type
T8
Compatible Lamp Type
2D (4 Pin)
Control Gear Technology
Fluorescent
Manufacturers Part Number
22176002
Manufacturers Part Number
PC Basic 1x26SL
Manufacturers Part Number
22176002