Please select formation
NiCd Accus 4.0 Ah
Nickel-Cadmium cells (NiCd)
Fig. 1: Stick; Connection: blade terminal
Fig. 2: Stick + Stick; Connection: blade terminal
Fig. 1: stick
Fig. 2: stick + stick
Product description
High-temperature NiCd cells for use with emergency lighting units
4 year design life
1 year guarantee from delivery date
Properties
Constant high-temperature operation – depending on the emergency lighting unit used (refer to respective emergency control gear data sheet)
Good charging properties at high temperature
High energy maintenance of the charged battery
Certified quality manufacturer
In various configurations
Simple connection with blade terminal
With polycarbonate fixing caps and connecting cable
Electrical connection with mounted end caps possible
Suitable for emergency lighting equipment as per IEC 60598-2-22
Tridonic PC258T8TOP Electronic Ballast 220/240v 50/60/0Hz to run 2x58w T8 Tubes - PC 2/58 T8 TOP
This is obsolete , a Philips variant will be sent instead
https://www.easy-controlgear.com/products/philips-hfp258tldiii-ph-hf-p-2x58-tl-d-iii-220-240v-50-60hz-id?_pos=1&_sid=6add9a2d9&_ss=r
Driver LCO 165W 200–1050mA 285V one4all NFC C EXC3
excite NFC outdoor series
Product description
Dimmable built-in constant current LED driver
Dimming range 5 – 100 % (min. 10 mA)
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
Output current adjustable between 200 – 1,050 mA via NFC, DALI or ready2mains Programmer
Max. output power 165 W
Up to 93 % efficiency
Lowest power input on stand-by < 0.16 W
Nominal lifetime of 100,000 h and 8 years guarantee
Interfaces
Near field communication (NFC)
one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration via mains)
U6Me2 (configuration of chronoSTEP 2 via mains)
Terminal blocks: 45° / 0° push terminals
Functions
Adjustable output current in 1-mA-steps (NFC, DALI, ready2mains)
Programmable chronoSTEP: times and levels (NFC, DALI, U6Me2, ready2mains)
Dimming through mains voltage (inputDIM)
Enhanced constant light output function (eCLO)
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Configurable external temperature management (ETM)
Intelligent Temperature Guard (ITG)
Intelligent Voltage Guard Plus (IVG+)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Flexible configuration via companionSUITE (NFC, DALI, ready2mains™) or U6Me2 programmer
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
In-field programming possible after installation with NFC interface and ready2mains
High overvoltage protection: up to 10 kV asymmetric (protection class I and II)
Typical applications
Road, street and industry
Product description
Fits in most existing MR16 / GU10 halogen luminaires
10 W LED Equivalent to 50 W MR16 halogen with higher lumen output
Perfect solution for MR16 / GU10 replacement project
Module with integrated electronic, heatsink and optics
Compatible with leading and trailing edge phase cut dimmers
Dimming range 0.1 to 100 % (depends on dimmer)
Eye-catching lens optic with mirrors halogen facettes
Long lifetime: L70B50 >50,000 h at tp = 75 °C
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
EM powerLED PRO DIM SR 45 W
Combined emergency lighting LED driver
Note: LED driver supplied with duration dip switch (2-way) in 3 hours position. Duration dip switch and I-SELECT 2 PLUG must be set before battery and mains connection.
Product description
Independent dimmable LED driver
Emergency lighting LED driver with DALI interface and automatic test function
For self-contained emergency lighting
For LED modules with a forward voltage of 20 – 50 V
SELV for output voltage < 60 V DC
Compact plastic casing with strain relief
Properties
Output power 6 – 45 W
Constant current LED operation
300 – 1,400 mA output current in mains operation, adjustable with I-SELECT 2 PLUG in steps of 25 mA or via DALI in steps of 1 mA
Integrated emergency lighting unit
1, 2 or 3 h rated duration
Operating time selectable with dip switch (2-way)
Automatic shutdown of output if the forward voltage of the LED is out of range
Two-colour status display LED
Electronic multi-level charge system
Pulse current charging for NiMH batteries
Polarity reversal protection for battery
Power-up fading at AC
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Deep discharge protection
Short-circuit-proof battery connection
5 years guarantee
Interfaces
one4all (DALI DT 1 & 6, DSI, switchDIM, corridorFUNCTION)
Terminal blocks: 45° push terminals
Batteries
High-temperature cells
NiCd or NiMH batteries
D, Cs, LA or LAL cells
Battery box for independent use
4 year design life
1 year guarantee
For battery compatibility refer to data sheet
Digital Dimming Ballast to run 2 X 21/39w T5 tubes - PCA 2x21/39 T5 ECO - 22185102
Product description
Processor-controlled ballast with xitec II inside
Highest possible energy class CELMA EEI = A1 BAT (1)
Noise-free precise control via DALI or DSI signal, switchDIM or corridorFUNCTION
Nominal lifetime up to 100,000 h (at ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h)
Multilamp management
OEM-specific reserved memory areas
5 years guarantee
Interfaces
DALI
DSI
switchDIM (with memory function + selectable dimming rate)
corridorFUNCTION (3 preprogrammed profiles)
Integrated SMART interface for function with SMART Sensor 5D 19f and corridorFUNCTION plugs
Functions
Intelligent Temperature Guard (overtemperature protection)
Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown)
Optimum filament heating in any dimmer setting
Disconnection of filament heating from a dimming level of approx. 90 % for maximum energy efficiency (SMART-Heating concept)
corridorFUNCTION with ambient light control
Automatically triggered emergency lighting value in DC mode, 15 %
For emergency lighting systems as per EN 50172
Automatic start after replacement of defective lamps
Automatic shutdown if the lamp is faulty
Product description
Kit with emergency lighting LED driver, battery for 3 h duration and indication LED
For self-contained emergency lighting
For LED modules with a forward voltage of 10 – 54 V
SELV for output voltage < 60 V DC
Low profile casing (21 x 30 mm cross-section)
For luminaire installation
EM = Emergency
