next Gen replacement for the 89603242
Product description
Ideal for linear and panel lights
2 terminals for serial wiring
Perfectly uniform light, even if several LED modules are used together in a line
Push terminals for quick and simple wiring of LED module to LED module
Option backside terminal
Broad portfolio from extruded lenses and covers available
HE ... High Efficiency, NM ... Nominal Mode, HO ... High Output
Long lifetime up to 72,000 hours
5 years guarantee
ZRM 4.5-ES/C
A standard non-dimmable 35-400 Watt Standard Pulse Ignitor from Tridonic for Metal Halide and Sodium Lamps that do not feature an internal starter. An integrated digital three-start counter stops the ignition process after three unsuccessful lamp starts thereby avoiding overloading the control gear with high-voltage pulses.
Technical Specifications
Control Gear Type
Ignitor
Manufacturer
Tridonic
Dimming?
Non-Dimmable
No. Of Lamps
Single (1x)
Height
27 mm
Lamp
HPS: 100-400w
Length
85 mm
Striking Distance (m)
4
Type
Control Gear
Width
38 mm
Manufacturers Part Number
87500082
EM converterLED ST NiCd/NiMH 50 V
EM conversion
Data sheet
Product description
Replaces the 89800182
Self-contained emergency lighting LED driver with self-test function
Non maintained operation
For LED modules with a forward voltage of 10 – 54 V
SELV for output voltage < 60 V DC
For luminaire installation
Compatible with Tridonic's LLE FLEX modules (ADV, EXC)
EM = Emergency
Nominal lifetime up to 100,000 h
Please note this item is obsolete, If you are using dali dimming please use the ALTERNATIVE
If you are using DSI dimming then please do not order as we aare unable to supply
Digital Dimming Ballast to run 2 X 28/54w T5 tubes - PCA 2x28/54 T5 ECO - 22185100
Product description
Processor-controlled ballast with xitec II inside
Highest possible energy class CELMA EEI = A1 BAT (1)
Noise-free precise control via DALI or DSI signal, switchDIM or corridorFUNCTION
Nominal lifetime up to 100,000 h (at ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h)
Multilamp management
OEM-specific reserved memory areas
5 years guarantee
Interfaces
DALI
DSI
switchDIM (with memory function + selectable dimming rate)
corridorFUNCTION (3 preprogrammed profiles)
Integrated SMART interface for function with SMART Sensor 5D 19f and corridorFUNCTION plugs
Functions
Intelligent Temperature Guard (overtemperature protection)
Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown)
Optimum filament heating in any dimmer setting
Disconnection of filament heating from a dimming level of approx. 90 % for maximum energy efficiency (SMART-Heating concept)
corridorFUNCTION with ambient light control
Automatically triggered emergency lighting value in DC mode, 15 %
For emergency lighting systems as per EN 50172
Automatic start after replacement of defective lamps
Automatic shutdown if the lamp is faulty
22185100
Driver LC 100W 250–700mA flexC lp EXC
excite series non-SELV
Product description
Constant current LED driver for luminaire installation
For luminaires of protection class I and protection class II
Adjustable output current between 250 and 700 mA via ready2mains Programmer or I-SELECT 2 plugs
Max. output power 100 W
Up to 95 % efficiency
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Low profile metal casing with white cover
Type of protection IP20
Interfaces
ready2mains (configuration via mains)
Terminal blocks: 0° push terminals
Functions
Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
Intelligent Voltage Guard (overvoltage and undervoltage monitoring)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to high efficiency
Flexible configuration via ready2mains and I-SELECT 2
Reliability proven by lifetime up to 100,000 h and 5 years guarantee
Typical applications
For linear/area lighting in office applications
This is now obsolete, the Osram one in the link below is the same size 360mm
Alternative
Tridonic PC21435T5PRO Electronic HF low profile ballast to run 2 X 14w /21w/28w/35w T5 Tubes
T5 2x14-35W Non Dimmable. High frequency electronic ballast. Dims: Length 360mm Width 30mm Height 28mm Fixing Centres 445mm** Replaces article codes:22087731, 22176097 **
Volts:
220 - 240 v
Watts:
2x14 w
Length:
360 mm
Average Life:
N/A
Diameter:
30 mm
Bulb/Lamp Type:
Ballast
Size:
30 x 360 mm
Height:
360 mm
Width:
30 mm
Fix Centre:
350mm
Weight:
200g
Technology:
Electronic
Beam Angle:
N/A
Lumens:
N/A
Colour Temperature:
N/A
These are now obsolete please call for alternative 01462 490 066
The Tridonic PC 3/4x18-33 COMBO is a combination electronic ballast and emergency lighting unit for linear 18 Watt T8 fluorescent lamps. It has a 3 hour rated duration and should be used with a 3 cell battery pack. To Run: 3 x 18 Watt T8 fluorescent tubes 4 x 18 Watt T8 fluorescent tubes. This product comes with a 1 year guarantee. Tridonic Product Number: 89818236
Tridonic PC122642TCPRO Electronic compact ballast to run 1x18-42w - 1x22w - 2x18-26w TCT Pro
Tridonic are a world-leading supplier of lighting technology and support their customers with intelligent hardware and software solutions. Tridonic aim to make products which offer the highest level of quality, reliability and energy savings.
The Tridonic 22176408 PC TC PRO electronic fixed output ballast is designed for luminaires with 1 or 2 x 26-42W TC lamps. The ballast has a compact design and boasts a nominal life-time up to 100,000 hours.
The ballast offers a large temperature range and ensures constant luminous flux irrespective of fluctuations in mains voltage. Various functions and safety features are included, such as: Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown), Automatic start after replacement of defective lamps and Safety shutdown of defective lamps at end of life.
