Driver LCA 150W 24V one4all SC PRE
premium series 24 V – dimmable (IP20)
With strain-relief
Product description
NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
One4all interface and ready2mains enable different dimming options
Dimming range 1 to 100 %
No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal lifetime up to 50,000 h
5 years guarantee
Typical applications
Cove lighting, facade accent lighting, ceiling integration
Technical details
24 V, 150 W
Small design (325 x 43 x 30 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
Output terminals (+/–) equipped twice for more flexibility in the application
Interfaces
one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals
System solution
Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
In connection with Flex accessories wire to PCB plug
The functioning of third party light sources at a low dim level cannot be guaranteed and is not recommended
Product Details
Status Indication Green LED complete with lead designed specifically for the purpose of indicating when a charging current is flowing into the battery.
· Indicates that charging current is flowing into the battery
· Wire length: 750mm
· Bare Wire Connection
Technical Specifications
Single LED
Colour
Green
25w 350-1050Ma flexC Sr EXC LED Driver - Tridonic - 28000700
Driver LC 25W 350–1050mA flexC SR EXC
excite series
Product description
Independent constant current LED Driver
Adjustable output current between 350 and 1,050 mA via ready2mains Programmer or I-SELECT 2 plugs
Max. output power 25 W
Up to 86 % efficiency
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Strain relief with loop through function
Interfaces
ready2mains (configuration via mains)
Terminal blocks: 0° / 45° push terminals (input / output)
Functions
Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
Suitable for emergency escape lighting systems acc. to EN 50172
For cable cross-sections up to 2.5 mm²
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to high efficiency
Flexible configuration via ready2mains and I-SELECT 2
No tools required for installation
Typical applications
For downlight, spotlight and decorative applications
Product description
Dimmable constant current LED driver (SELV)
Independent driver with strain-relief housing
Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids)
Dimmable via leading edge and trailing edge phase dimmers
Trailing edge is a benefit in terms of noise compared to leading edge
Dimming range 5 to 100 % (depending on dimmer)
For luminaires with F or M and MM as per EN 60598, VDE 0710 and VDE 0711
Max. output power 14.7 W
Output current 350 mA
Nominal lifetime up to 50,000 h
5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
Driver LC 75W 100–400mA 1-10V lp EXC
Linear drivers
Data sheet
Product description
Constant current LED driver for luminaire installation
Dimmable via 1 ... 10 V interface
Dimming range 10 – 100 % (Depending on load, for details refer to chapter 4.7 Dimming in data sheet.)
For luminaires of protection class I and protection class II
Adjustable output current between 100 and 400 mA via ready2mains Programmer or I-SELECT 2 plugs
Max. output power 75 W
Up to 94 % efficiency
Nominal lifetime up to 100,000 h
5 years guarantee (conditions at www.tridonic.com)
OBSOLETE , IF using DALI dimming the below will suffice
DALI Alternative
If using DSI no alternative available
Tridonic Electronic compact dimming ballast to run 1 x 26-57w TC Compact
The Tridonic PCA 1x26-57 TC ECO xitec II is a high frequency dimmable ballast for use with DALI/DSI/switchDIM interfaces.
Compatible with the following lamps:
1 x 40w T5 Circular Lamp
1 x 26w Double Turn Compact Fluorescent Lamp
1 x 26w Triple Turn Compact Fluorescent Lamp
1 x 40w Long Single Turn Compact Fluorescent Lamp
1 x 40w T5 Circular Fluorescent Lamp
1 x 32w Triple Compact Fluorescent Lamp
1 x 42w Triple Turn Compact Fluorescent Lamp
1 x 57w Triple Turn Compact Fluorescent Lamp
Tridonic part number: 22185120
Product description
NEW: lumDATA (DALI-2 part ext. 251, 252 and 253)
Dimmable built-in constant current LED Driver
Dimming range 1 to 100 %
For luminaires of protection class I and protection class II
Output current adjustable between 900 – 1,750 mA via ready2mains Programmer, I-SELECT 2 plugs or DALI
Max. output power 60 W
Up to 90 % efficiency
Power input on stand-by < 0.2 W
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Interfaces
one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals
Functions
Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2)
Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance)
Constant light output function (CLO)
Power-up fading at AC
Configurable via ready2mains
Switch off the Driver with fade2zero
Service monitor to log certain events
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to low stand-by losses and high efficiency
Flexible configuration via DALI, ready2mains and I-SELECT 2
Reliability proven by lifetime up to 100,000 h and 5 years guarantee
Typical applications
For linear/area lighting in office applications
