42 W constant current LED driver 300 mA – 1050 mA adjustable current output Lifetime up to (h): 100000 Product number: 5 902 000

Read more less

  LC43MINI-CC-300-1050 42 W SELV constant current LED driver • SELV output protection for safety and flexibility in luminaires • Low current ripple, complying with IEEE 1789 recommendation • Suitable for use in emergency light applications • Wide output voltage and current range for wide variety of luminaire setups • Extremely compact dimensions for flexible usage • Ideal solution for Class I and Class II luminaires Product code:  5945xxx (see last page) 42 W  220 – 240 V 50 – 60 Hz • For driving Class III (SELV) luminaires, optional strain relief for independent use outside of luminaire (LC-SR-MINI, LC-SR-MINI-B or LC-SR-MINI-LOOP)* *See also last page. Functional Description • Adjustable constant current output: 300 mA to 1050MAH

Read more less

5921005 Technical Specifications Control Gear Type LED Driver Wattage 44.1 W Manufacturer Helvar Dimming? Dimmable Input Voltage 220-240 V Length 131 mm Type Control Gear IP Rating IP20 Current Output 700-1050mA Warranty 5 Years Frequency Range 50/60 Width 43 mm AC Current 196-264mA Selectable Current 700mA, 750mA, 800mA, 850mA, 900mA, 950mA, 1000mA, 1050mA (Factory Setting) DC Voltage 176-280mA Mains Frequency 50/60 Hz Control Gear Technology LED

Read more less

LC60DS-DA-700-1400   60 W DALI-2 dimmable LED driver 700 mA – 1400 mA adjustable current output Lifetime up to (h): 50000 Dimming range: 1% – 100% Product number: 5 934 005 More information: DALI, AMPLITUDE, PanelReady Datasheet

Read more less

Product description Dimmable constant current LED driver (SELV) Independent LED driver with cable clamps Dimmable via leading edge and trailing edge phase dimmers Dimming range 5 to 100 % (depending on dimmer) For luminaires of protection class I and protection class II For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711 Temperature protection as per EN 61347-2-13 C5e Selectable output current between 700 and 1,050 mA Max. output power 44 W Up to 87 % efficiency Nominal lifetime up to 50,000 h 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)

Read more less

Driver LCA 45W 500–1400mA one4all SR PRE premium series Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Independent dimmable constant current LED Driver with strain-relief Dimmable via DALI / DALI-2 Dimming range 1 – 100 % (whole operating window) Output current adjustable between 500 – 1,400 mA Max. output power 45 W Up to 90 % efficiency Power input on stand-by < 0.15 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Strain relief with loop through function Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° / 45° push terminals (input / output) Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the Driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Suitable for emergency escape lighting systems acc. to EN 50172 For cable cross-sections up to 2.5 mm² Benefits Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 No tools required for installation Typical applications For downlight, spotlight and decorative applications

Read more less

Driver LCA 45W 500–1400mA one4all SR PRE premium series Product description NEW: lumDATA (DALI-2 part ext. 251, 252 and 253) Independent dimmable constant current LED Driver with strain-relief Dimmable via DALI / DALI-2 Dimming range 1 – 100 % (whole operating window) Output current adjustable between 500 – 1,400 mA Max. output power 45 W Up to 90 % efficiency Power input on stand-by < 0.15 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Strain relief with loop through function Interfaces one4all (DALI-2 DT 6, DSI, switchDIM, corridorFUNCTION) ready2mains (configuration and dimming via mains) Terminal blocks: 0° / 45° push terminals (input / output) Functions Adjustable output current in 1-mA-steps (DALI, ready2mains, I-SELECT 2) Fulfills DALI-2 parts: 251 (Luminaire data), 252 (Energy reporting) and 253 (Diagnostics & Maintenance) Constant light output function (CLO) Power-up fading at AC Configurable via ready2mains Switch off the Driver with fade2zero Service monitor to log certain events Protective features (overtemperature, short-circuit, overload, no-load, input voltage range, reduced surge amplification) Suitable for emergency escape lighting systems acc. to EN 50172 For cable cross-sections up to 2.5 mm² Benefits Application-oriented operating window for maximum compatibility Best energy savings due to low stand-by losses and high efficiency Flexible configuration via DALI, ready2mains and I-SELECT 2 No tools required for installation Typical applications For downlight, spotlight and decorative applications

Read more less

https://resources.tridonic.com/PDB/Ressource/Web_TR/Archive_PDF/LED_Drivers/Linear_dimming/DS_TALEXXconverter_LCAI_70W_300mA_one4all_en.pdf   obsolete limited stock still available    

Read more less

Obsolete , replaced by :- https://www.easy-controlgear.com/products/driver-lc-15w-350ma-fixc-pc-sr-snc2-essence-series Driver LCBI 15W 350MA BASIC phase-cut SR ADV advanced series Product description Dimmable via leading edge and trailing edge phase dimmers Output dimmed analogue (current amplitude) Dimming range typ. 5 to 100 % (depending on dimmer) Potted style Type of protection IP20 Screw terminal Connecting cable, wire cross-section 0.5 – 2.5 mm² SELV 350, 500 or 700 mA output current Output power 14/15 W Nominal lifetime of 60,000 h (at max ta 50 °C with a failure rate ≤ 0.2 % per 1,000 h) 5 years guarantee Properties Casing: polycarbonate, white Compact dimensions Overload protection Short-circuit protection

Read more less

Built-in 0~10Vdc and PWM signal dimming function Output current level selectable by DIP switchProtections: Short circuit / Over voltage / Over temperature Other features: 180~295VAC input only Built-in active PFC function Protections: Short circuit / Over voltage / Over temperature Cooling by free air convection Fully isolated plastic case No load power consumption <0.5W Class II power unit, no F.G. Logarithm or linear dimming curve selectable (meet IEC62386-207) Built-in 0~10Vdc and PWM signal dimming function Power supplies synchronization function up to 10 units Suitable for indoor LED lighting applications 3 years warrantyMore Information Manufacturer Mean Well Output Wattage (W) 25 Output Voltage Choose Option Dimmable (Type) 0~10Vdc & PWM signal Dimensions 105x 68x 23 EMC Standards EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 Input Voltage 180~295VAC, 254~417VDC Safety Standards UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 approved Output Voltage Options Single Working Temperature -40~+85°C PDF Datasheet LCM-25-SPEC.PDF

Read more less

Built-in 0~10Vdc or PWM signal dimming function Output current level selectable by DIP S.W. Built-in active PFC function Protections: Short circuit / Over voltage / Over temperature  Other features: 180~295VAC input only Cooling by free air convection Temperature compensation function by external NTC No load power consumption <1.2W@AC always on Fully isolated plastic case Class power unit, no FG Built-in 12V/50mA auxiliary output Suitable for LED lighting applications Power supplies synchronization function up to 10 units 3 years warrantyMore Information Manufacturer Mean Well Output Wattage (W) 60 Output Voltage Choose Option Dimmable (Type) 0~10Vdc & PWM signal Dimensions 123.5x 81.5x 23 EMC Standards Compliance to EN55015, EN61000-3-2 Class C; EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2KV), criteria A Input Voltage 180~295VAC 254~417VDC Safety Standards UL8750, ENEC EN61347-1, EN61347-2-13,EN62384 independent approved Output Voltage Options Single Working Temperature -40~+85°C PDF Datasheet LCM-60-spec_2.pdf

Read more less

Product Details 60W Constant current LED Power Supply LCM-60DA series The LCM-60DA LED driver is a 60W multiple-stage output current LED power supply with built-in DALI interface. The series have built-in active PFC function, protections including short circuit, over voltage and over temperature. Fully isolated in a plastic case with strain relief design the unit is IP20 rated and is suitable for LED lighting applications. Output current level selectable by DIP Switch180∼295VAC input onlyBuilt-in active PFC functionProtections: Short circuit / Over voltage / Over temperatureCooling by free air convectionFully isolated plastic caseClass II power unit, no FGBuilt-in DALI interface and push dimming functionBuilt-in 12V/50mA auxiliary outputIP20 designTemperature compensation function by external NTCNo load power consumption <1WPower supplies synchronization function up to 10 unitsSuitable for LED lighting applications Mean Well LED Drivers, Constant Current Specifications Attribute Value Input Voltage 180 → 295 V ac, 254 → 417 V dc Output Voltage 2 → 90V Operation Constant Current Output Current 1.05 A, 1.4 A, 500 mA, 600 mA, 700 mA, 900 mA Maximum Output Power 60.3W Dimming Operation DALI AC or DC Input Voltage ac, dc IP Rating IP20 Voltage Rating 180 → 295 V ac, 254 → 417 V dc

Read more less