The Tridonic I-SELECT 2 PLUG 400MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001112
The Tridonic LCI 35w 1050mA TEC C LED driver is a fixed output, constant current LED driver with a maximum output power of 35w. These drivers have an average life of 50,000 hours and a 5 year guarantee. The LCI 35w 1050ma TEC has over temperature and overload protection, as well as short circuit and no-load protection. Tridonic article number: 87500198
The Tridonic ZRM 6-ES/C is a superimposed ignitor to ignite 70-400w SON lamps and specific 35-400w metal halide lamps. Tridonic article number : 87500083
https://resources.tridonic.com/PDB/Ressource/Web_TR/Archive_PDF/LED_Drivers/Linear_dimming/DS_TALEXXconverter_LCAI_70W_300mA_one4all_en.pdf
obsolete limited stock still available
Driver LC 50W 100–400mA flexC lp EXC
excite series non-SELV
Product description
Constant current LED driver for luminaire installation
For luminaires of protection class I and protection class II
Adjustable output current between 100 and 400 mA via ready2mains Programmer or I-SELECT 2 plugs
Max. output power 50 W
Up to 93 % efficiency
Nominal lifetime up to 100,000 h
5 years guarantee
Housing properties
Low profile metal casing with white cover
Type of protection IP20
Interfaces
ready2mains (configuration via mains)
Terminal blocks: 0° push terminals
Functions
Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2)
Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
Intelligent Voltage Guard (overvoltage and undervoltage monitoring)
Suitable for emergency escape lighting systems acc. to EN 50172
Benefits
Application-oriented operating window for maximum compatibility
Best energy savings due to high efficiency
Flexible configuration via ready2mains and I-SELECT 2
Reliability proven by lifetime up to 100,000 h and 5 years guarantee
Typical applications
For linear/area lighting in office applications
Driver LCBI 10W 180/350/500mA PHASE-CUT/1–10V lp
advanced series
Product description
Dimmable built-in constant current LED driver
Constant current LED driver
Dimmable via leading edge and trailing edge phase dimmers
Dimmable via 1 ... 10 V
Output dimmed analogue (current amplitude)
Dimming range typ. 10 to 100 % (depending on dimmer)
For luminaires of protection class I and protection class II
Temperature protection as per EN 61347-2-13 C5e
SELV
Output current 180, 350 or 500 mA
Output power 10 W
Nominal lifetime up to 50,000 h
5 years guarantee
Housing properties
Casing: polycarbonate, white
Type of protection IP20
Push-in terminals
Functions
Overload protection
Short-circuit protection
No-load protection
No output current overshoot at mains on/off
This is a Tridonic fixed output built-in, constant current LED driver with an output current of 150-400mA. This driver has a max output powr of 65w and an average life of 100,000 hours.
