28W 2D Emergency Conversion Ballast   Obsolete, viable alternative will be sent 

Read more less

Product description Constant current LED driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Adjustable output current between 250 and 700 mA via ready2mains Programmer or I-SELECT 2 plugs Max. output power 17 W Up to 86 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Interfaces ready2mains (configuration via mains) Terminal blocks: 45° push terminals Functions Adjustable output current in 1-mA-steps (ready2mains, I-SELECT 2) Protective features (overtemperature, short-circuit, overload, no-load, input voltage range) Intelligent Voltage Guard (overvoltage and undervoltage monitoring) Suitable for emergency escape lighting systems acc. to EN 50172 Benefits Application-oriented operating window for maximum compatibility Best energy savings due to high efficiency Flexible configuration via ready2mains and I-SELECT 2 Typical applications For downlight, spotlight and decorative applications

Read more less

obsolete the only 4.8V Invertor  still available  is  ALTERNATIVE 28W 2D Emergency Conversion Mini Ballast - Tridonic - 89899950

Read more less

This item is now obsolete  Driver LC 20W 350mA fixC C SNC essence series Product description Fixed output built-in LED driver Constant current LED driver For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Output current 350 mA Max. output power 18.9 W Nominal lifetime up to 50,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Functions Overload protection Short-circuit protection No-load protection Burst protection voltage 1 kV Surge protection voltage 1 kV (L to N) Surge protection voltage 2 kV (L/N to earth)

Read more less

Driver LC 15W 300/350mA fixC SC SNC2 essence series Product description Fixed output LED driver Can be either used built-in or independent with clip-on strain-relief (see accessory) Independent LED driver with cable clamps Constant current LED driver For luminaires of protection class II Temperature protection as per EN 61347-2-13 C5e Output current 300 or 350 mA Max. output power 15 W Nominal lifetime up to 50,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Functions Overload protection Short-circuit protection No-load protection Burst protection voltage 1 kV Surge protection voltage 0.5 kV (L to N) Surge protection voltage 1 kV (L/N to earth) Typical applications For spot light and downlight in retail and hospitality applications For panel light and area light in office and education application

Read more less

Driver LCBI 10W 180/350/500mA PHASE-CUT/1–10V lp advanced series Product description Dimmable built-in constant current LED driver Constant current LED driver Dimmable via leading edge and trailing edge phase dimmers Dimmable via 1 ... 10 V Output dimmed analogue (current amplitude) Dimming range typ. 10 to 100 % (depending on dimmer) For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e SELV Output current 180, 350 or 500 mA Output power 10 W Nominal lifetime up to 50,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Push-in terminals Functions Overload protection Short-circuit protection No-load protection No output current overshoot at mains on/off

Read more less

Driver LC 38W 500-700mA flexC lp ADV advanced series SELV Product description LED Constant current LED driver for luminaire installation New version DC operating with EL marking For luminaires of protection class I and protection class II Output current adjustable between 500 – 700 mA Temperature protection as per EN 61347-2-13 C5e Max. output power 38 W Up to 85 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces Terminal blocks: 45° push terminals Functions Overload protection Short-circuit protection No-load protection Overtemperature protection Burst protection voltage 1 kV Surge protection voltage 1 kV (L to N) Surge protection voltage 2 kV (L/N to earth) Suitable for emergency escape lighting systems acc. to IEC 50172 Typical applications For linear/area lighting in office applications

Read more less

Product description Independent driver with strain-relief housing Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids) Temperature protection as per EN 61347-2-13 C5e Output current 350 mA Max. output power 10 W BIS approval mark for art. no.: 87500802, 87500804. Nominal lifetime up to 50,000 h Replacement  for the 87500240 and 87500581        

Read more less

Product description Independent constant current LED driver Dimmable via DALI-2 Dimming range 1 to 100 % (min. 5 mA) Output current adjustable between 450 – 1,050 mA with DALI or NFC Max. output power 45 W Up to 88 % efficiency Power input on stand-by < 0.5 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Strain relief with loop through function Interfaces Near field communication (NFC) one4all (DALI-2 DT 6, switchDIM, corridorFUNCTION V2) Functions Adjustable output current in 1-mA-steps (NFC, DALI-2) Constant light output function (CLO) Protective features (overtemperature, short-circuit, overload, no-load) Surge protection voltage 1 kV (L – N) Suitable for emergency escape lighting systems acc. to EN 50172 For cable cross-sections up to 2.5 mm² Benefits Flexible configuration via companionSUITE (NFC, DALI-2) Application-oriented operating window for maximum compatibility Typical applications For applications in downlight and decorative luminaires

Read more less

The Tridonic LCU 100/12 EO20 is a 100w 12v constant voltage LED driver with a universal input voltage range and a constant output voltage. This driver has an over temperature and overload protection, short circuit shutdown feature and automatic restart. This driver has a 5 year warranty. Tridonic article number: 24166327

Read more less

This is a Tridonic fixed output built-in, constant current LED driver with an output current of 150-400mA. This driver has a max output powr of 65w and an average life of 100,000 hours.

Read more less

Product description Clip for fixation of LED modules with 4.3 mm holes Fast snap on mounting (sheet thickness 0.5 – 1.0 mm for PUSH-FIX and 1 – 2 mm for PUSH-FIX Long) For drilling hole 4 mm Clip made of polycarbonate Minimum sales quantity 500 pcs.

Read more less