The Tridonic LC 25W 500mA LED Driver is a fixed output, constant current LED driver with a maximum output power of 25w. These drivers have an average life of 100,000 hours and a 5 year guarantee. . Tridonic article number: 28000679

Read more less

Driver LC 71W 250-350mA flexC lp ADV advanced series non-SELV Product description LED Constant current LED driver for luminaire installation New version DC operating with EL marking For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Output current adjustable between 250 – 350 mA Max. output power 71 W Up to 91.5 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces Terminal blocks: 45° push terminals Functions Overload protection Short-circuit protection No-load protection Burst protection voltage 1 kV Surge protection voltage 1 kV (L to N) Surge protection voltage 2 kV (L/N to earth) Typical applications For linear/area lighting in office applications

Read more less

river LC 50W 900-1200mA flexC SC ADV advanced series With strain-relief (see accessory) Product description Can be either used built-in or independent with clip-on strain-relief (see accessory) Small design (115 x 43 x 30 mm) Constant current LED driver For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Adjustable output current between 900 and 1,200 mA, in 5 steps with ADV plug technology (pre-selected current 900 mA) Max. output power 51.6 W Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Casing: polycarbonate, white Type of protection IP20 Functions Overtemperature protection Overload protection Short-circuit protection No-load protection Burst protection voltage 1 kV Surge protection voltage 1 kV (L to N) Surge protection voltage 2 kV (L/N to earth) Typical applications For spot light and downlight in retail and hospitality applications For panel light and area light in office and education application   Data sheet   Order information Common data Technical data Downloads Links Certificates Accessories EPD Ordering data Type Article number Pack­ag­ing, carton Pack­ag­ing, pallet Weight per pc. LC 50W 900-1200mA flexC SC ADV 28002479 15 pc(s). 1,800 pc(s). 0.124 kg

Read more less

river LC 57W 800-1050mA flexC lp ADV advanced series SELV Product description LED Constant current LED driver for luminaire installation New version DC operating with EL marking For luminaires of protection class I and protection class II Temperature protection as per EN 61347-2-13 C5e Output current adjustable between 800 – 1,050 mA Max. output power 57 W Up to 86 % efficiency Nominal lifetime up to 100,000 h 5 years guarantee Housing properties Low profile metal casing with white cover Type of protection IP20 Interfaces Terminal blocks: 45° push terminals Functions Overload protection Short-circuit protection No-load protection Overtemperature protection Burst protection voltage 1 kV Surge protection voltage 1 kV (L to N) Surge protection voltage 2 kV (L/N to earth) Suitable for emergency escape lighting systems acc. to IEC 50172 Typical applications For linear/area lighting in office applications

Read more less

The Tridonic I-SELECT 2 PLUG 700MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with LED Driver series PRE and EXC. Tridonic article number: 28001118

Read more less

Electronic ballast with highest possible energy class CELMA EEI A2 BAT. It offers large temperature range, intelligent voltage guard, precise lamp operation using adjustment of lamp parameters, advanced SMART-Heating for minimum 50000 starts without replacement of lamps, constant luminous flux irrespective of fluctuations in mains voltage, designed for THD <10%, for luminaires of protection class I and protection class II. It features automatic start after replacement of defective lamps, safety shutdown of defective lamps and at end of lamp life (EOL 2), insulation displacement connection (IDC) terminal for rapid automatic or manual wiring and for emergency lighting systems as per EN 50172. · Rated lifespan: 100,000 hours · Flicker free warm start · Min/Max ambient working temperature: -25°C to 70°C · Degree of protection: IP20 · Operating voltage: 198-264V (AC), 176-280V (DC)

Read more less

Obsolete , you will be sent the below   https://www.easy-controlgear.com/products/tridonic-pc126basicsl-tr-1x26-tcd-1-x-26w-tct-slim-basic-ballast?_pos=2&_sid=a8b496c0b&_ss=r Tridonic PC128DDPRO Electronic HF ballast to run 1 x 28w Compact DD lamps

Read more less

70-250w SON Sodium - 35-250w Metal Halide Ignitor

Read more less

OBSOLETE Nearest alternative is  Alternative 20w 350-900ma Top C LED Converter - Tridonic - 28000191

Read more less

The Tridonic ZRM 6-ES/C is a superimposed ignitor to ignite 70-400w SON lamps and specific 35-400w metal halide lamps. Tridonic article number : 87500083

Read more less

Tridonic PC22642TCTPRO Electronic compact ballast to run 2x 26/32/42w Energy 4pin lamps

Read more less

Tridonic PC3414T5PRO Electronic ballast to run 3/4 x 14w T5 tubes - 22176315/22185211 Specifications Attribute Value Wattage 14 W Ballast Type Electronic Supported Lamp Shape T5 Supported Lamp Type Fluorescent Voltage Rating 220 → 240 V Dimmable No High Frequency Yes Length 360 mm Width 30 mm Height 21mm Minimum Operating Temperature -25°C Maximum Operating Temperature +60°C EU Energy Efficiency Rating A2

Read more less